Top 9 YPKD70-P/L-32 – Automotive Replacement Axle Shafts

As an Amazon Associate I earn from qualifying purchases.

1. Yukon Gear

#ad

Yukon YPKD70-P/L-32 Replacement Positraction Internal for 32-Spline Dana 70 Differential

#ad
Yukon Gear #ad - Engineered to Fit Specific Differential Applications. Includes two side gears, cross pin shaft, two pinion gears, roll pin and spider gear thrust washers. Higher quality Than OEM. 1 year Warranty.
BrandYukon Gear #ad
ManufacturerYukon Gear #ad
Height0 Inches
Length0 Inches
Weight15.6 Pounds
Width0 Inches
Part NumberYPKD70-P/L-32
ModelYPKD70-P/L-32
Warranty1 year warranty against Manufacturer defects

2. Yukon Gear

#ad

Yukon Gear & Axle YPKF9.75-PC-2 Trac Loc Clutch Set for Ford 9.75 Differential

#ad
Yukon Gear #ad - Fit type: Vehicle Specific. 1 year Warranty. Engineered to Fit Specific Differential Applications. Higher quality Than OEM.
BrandYukon Gear #ad
ManufacturerYukon Gear #ad
Height0 Inches
Length0 Inches
Weight3 Pounds
Width0 Inches
Part NumberYPKF9.75-PC-2
ModelYPKF9.75-PC-2
Warranty1 year warranty against Manufacturer defects

3. Comp Cams

#ad

COMP Cams 3121 Hi-Tech Roller Race Timing Set for '70-'82 Ford 351C, 351M and 400M

#ad
Comp Cams #ad - The middle keyway installs the camshaft with zero degrees of advance, while the other two allow for 4 degrees advance or retard. Made in USA. The camshaft gear is constructed from cast iron, while the crankshaft sprocket is built from induction hardened billet steel. Race ready - hi-tech roller race timing sets are ready to handle the high load race conditions.

Plus, this true double roller chain is designed to handle street and race applications without loosening up. With a heavy-duty large pin design, the chains are available separately! Premium quality gears - comp cams hi-tech roller race timing Sets are built using high end materials. The best chain - pre-stretched from the factory then heat-treated, our chains ensure timing accuracy for the life of your engine. Adjustable - designed to help ensure the best performance, hi-tech roller Race Timing Sets feature three keyways on the crankshaft sprocket.

This adjustability is a must for anyone who degrees in their camshafts. We ensure that all sets are quality checked and held to the tightest tolerances in the industry for "run-out". See 3033 for replacement chain. Tight tolerances - hi-tech roller race timing sets are all dynamically balanced before they get to our customers. Thanks to their quality construction, adjustability, pre-stretched chain and tight quality control tolerances, the COMP Cams Hi-Tech series timing sets are among the best available.
BrandComp Cams #ad
ManufacturerCOMP Cams #ad
Height1.25 Inches
Length9.68 Inches
Weight4.01 Pounds
Width6.61 Inches
Part Number3121
Model3121

4. Yukon Gear

#ad

Yukon Gear & Axle YK D70-U Master Overhaul Kit for Dana 70-U Differential

#ad
Yukon Gear #ad - Included in this kit are carrier bearings and races, pinion seal, pinion nut, oil baffles and slingers, ring gear bolts, complete shim kit, pinion bearings and races, marking compound with brush, crush sleeve, Thread locking compound, and gasket.

Yukon master overhaul kits give you all the high quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. Yukon's master overhaul kits are the most comprehensive and complete kits on the market. This kit uses timken bearings and races along with high quality seals and small parts.
BrandYukon Gear #ad
ManufacturerYukon #ad
Height0 Inches
Length0 Inches
Weight8.87 Pounds
Width0 Inches
Part NumberYK D70-U
ModelYK D70-U
Warranty1 year warranty against Manufacturer defects

5. Yukon

#ad

Yukon YPKD70-S-35 Replacement Standard Open Spider Gear Kit for Dana 70/80 Differential with 35-Spline Axle

#ad
Yukon #ad - Fit type: Vehicle Specific. Includes two side gears, cross pin shaft, two pinion gears, roll pin and spider gear thrust washers. Yukon uses higher quality materials and better techniques than oem to ensure a longer lasting spider gear set. Yukon replacement standard open spider gear kit for dana 70 and 80 with 35 spline axles. All components come with a one year warranty against manufacturing defects.
BrandYukon #ad
ManufacturerYukon #ad
Height0 Inches
Length0 Inches
Width0 Inches
Part NumberYPKD70-S-35
ModelYPKD70-S-35
Warranty1 year warranty against Manufacturer defects

6. TCI

#ad

TCI 141200 Breakaway Converter for '67 to '81 24-Spline Torqueflite 727

#ad
TCI #ad - The breakway is perfect for those who daily drive their perfomance cars and like to drive, not trailer, their car to the track. Providing 2, 600 rpm flash stall, 400-2, this converter greatly increases acceleration without negatively part-throttle driving.

This torque converter features harder launches, More Power, quicker acceleration, improved low-end power, requiring no additional modifications. Break into high serious high performance - the breakaway converter is a perfect converter for moderately modified street machines. Torque converters are pressure checked and computer tested. Made in ashland, Mississippi, USA. Fit type: Vehicle Specific. Harder launches, no mods required - the breakway converter is one of the best "bolt-on" modifications available.

The best quality - tci converters feature hdt coating, a breakthrough Heat Dissipating Technology for the best decrease in heat in the industry. Performance and efficiency - not only does the tci breakway deliver increased performance in street machines and weekend racers, but the Breakway Converter is designed to deliver efficiency at highway cruising speeds.
BrandTCI #ad
ManufacturerTCI #ad
Height7.6 Inches
Length13.9 Inches
Weight32.15 Pounds
Width14.8 Inches
Part Number141200
Model141200
Warranty1 Year Limited

7. Yukon Gear

#ad

Yukon Gear & Axle YPKF9.75-S-34 Standard Open Spider Gear Kit for Ford 9.75 Differential with 34-Spline Axle

#ad
Yukon Gear #ad - Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers. Higher quality Than OEM. 1 year Warranty. Engineered to Fit Specific Differential Applications.
BrandYukon Gear #ad
ManufacturerYukon Gear #ad
Height0 Inches
Length0 Inches
Weight9.1 Pounds
Width0 Inches
Part NumberYPKF9.75-S-34
ModelYPKF9.75-S-34
Warranty1 year warranty against Manufacturer defects

8. Hot Rods

#ad

Condition: New, HOT RODS CRANKSHAFT YAMAHA, VPN: 4062-AD, Manufacturer: HOT ROD, Part Number: 870194-AD

#ad
Hot Rods #ad - Ready for installation. Crankshaft is completely rebuildable with genuine Hot Rods connecting rods. Factory assembled and trued to OEM specifications, Hot Rods cranks will meet or surpass the OEM in performance. All new assembly sold complete with Hot Rods connecting rod.
BrandHot Rods #ad
ManufacturerHot Rods #ad
Height6.5 Inches
Length11.3 Inches
Weight9.24 Pounds
Width8.5 Inches
Part Number4062
Model4062--AZ2

9. Hot Rods

#ad

VPN: 4079-AD, HOT RODS CRANKSHAFT YAMAHA, Part Number: 870199-AD, Condition: New, Manufacturer: HOT ROD

#ad
Hot Rods #ad - Factory assembled and trued to OEM specifications, Hot Rods cranks will meet or surpass the OEM in performance. All new assembly sold complete with Hot Rods connecting rod. Crankshaft is completely rebuildable with genuine Hot Rods connecting rods. Ready for installation.
BrandHot Rods #ad
ManufacturerHot Rods #ad
Height7 Inches
Length17 Inches
Weight17.31 Pounds
Width9 Inches
Part Number4079
Model4079ocp