Top 9 Steering Wheel Puller Kit – Automotive Replacement Engine Harmonic Balancers

As an Amazon Associate I earn from qualifying purchases.

1. ABN


ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit

ABN #ad - Even application: no need to worry about steering wheel puller harmonic balancer puller kit causing damage to car parts; Yoke allows for 2 and 3-hole application; Harmonic balancer puller allows even pressure to parts.

Fit for your tool kit: wheel puller set includes 1 floating swivel, 3 1/4 by 2 inch 6. 3mm x 50mm bolts, 2 5/16 by 4 inch 7. 9mm x 101mm bolts, 2 1/4 by 3 inch 6. 3mm x 76mm bolts, 3 5/16 by 2 inch 7. 9mm x 50mm bolts. Car maintenance made easy: when removing harmonic balancers, gear pulleys, and crank shaft pulleys, steering wheels, depend on the ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit.

Blow-molded case: steering wheel puller tool harmonic balancer steering wheel puller kit comes in durable blow-molded plastic case to ensure efficient identification and organization of harmonic balancer puller parts. Built to last: steering wheel puller kit bits are hardened and tempered to ensure longevity and strength; Machine precision flywheel puller tool designed to withstand extended, repeated use.
BrandABN #ad
ManufacturerABN #ad
Height7 Inches
Length9 Inches
Weight2.49 Pounds
Width1.8 Inches
Part Number3224

2. ABN


ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

ABN #ad - Built to last: when used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil not included on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.

Effortlessly remove steering wheels: use the abn | steering wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column. Various applications: for most american domestic and import cars and light trucks; remove steering wheels with or without a telescoping tilt or tilt steering columns first remove the horn cover plate and the steering wheel nut when applicable; Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs.

Package contents: steering wheel removal kit package includes a steering wheel puller and bolts, 3/8"-16 x 3-1/2", 4 sets of cap screws for various thread requirements M8-1. 25 x 90 mm, 5/16"-24 x 3-1/2", non-threaded puller legs, steering wheel locking plate depressing tool, 5/16"-18 x 4" and a carrying case for your convenience; Pivot pin removing tool not included. Easy storage: heavy-duty 12. 6” x 2.
BrandABN #ad
ManufacturerABN #ad
Height10 Inches
Length12.6 Inches
Weight4.34 Pounds
Width2.25 Inches
Part Number2299

3. WYNNsky


WYNNsky 46 Pieces Steering Wheel Puller Kit, Use with Harmonic Balancers, SUVs, Pickups, Work on Most Cars, Crankshaft Pulleys and Gears

WYNNsky #ad - Attach the steering wheel puller using the appropriate bolts. Easy to use: look for threaded holes in the wheel hub assembly. Live-center forcing screw: it features quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening.

9mm thickness, with strong toughness and durability, 93mm Max span. It covers multiple applications on most cars, steering wheels, crankshaft pulleys, and SUVs on the market today, also for 2 or 3-hole application.44-way slotted puller yoke: the whole forging is integrally formed, 37mm× 11mm hole size, Adapt to various steering wheel disassembly, No bending and deformation. Application: this 43-piece set can be used on a variety of jobs: harmonic balancers, pickups, and gears with tapped holes.

Includes: 1pc yoke, 2pcs 1/4’’ ×28×2-1/2’’, 3pcs 5/16’’ ×24×3-1/2’’, different size of bolts, 3pcs m10×1.25×35mm; different size of washer: 6pcs 8mm id, 3pcs 3/8’’×24×1-1/2‘’, 3pcs 3/8’’×16×2‘’, 2pcs m8×1.25×65mm, 2pcs m8×1. 5×90mm, 3pcs m8×1. 25×45mm, 2pcs 5/16’’ ×24×3’’, 2pcs 3/8’’×16×4-1/2’’, 6pcs 10mm id, 2pcs 5/16’’ ×18×6’’, 3pcs 3/8’’×16×3’’, 4pcs 12mm ID. These holes are designed to be used by the puller for removal.
BrandWYNNsky #ad
ManufacturerWYNNsky #ad
Height1.75 Inches
Length10.75 Inches
Width8.25 Inches
Part NumberTH1064

4. Hardware Factory Store


Crank Shaft Pulley, Steering Wheel Kit Pulley Yoke Crank, HFS R 46 Pcs Harmonic Balancer Puller, Gear Puller, Storage Case

Hardware Factory Store #ad - Yoke is heat-treated alloy steel for strength and durability. Set includes yoke, pressure screw, and pulling screws in a molded storage case. The floating swivel prevents damage to the shaft ends. 30 different size bolts included. Kit features four yoke slots allowing unit to be used for two or three-hole applications.
BrandHardware Factory Store #ad
ManufacturerHardware Factory Store #ad
Height8.25 Inches
Length10.75 Inches
Weight4.5 Pounds
Width1.75 Inches
Part NumberFBA_11964



8MILELAKE Steering Wheel Remover and Lock Plate Compressor Set

8MILELAKE #ad - Remove steering wheels of most vehicles with or without telescoping tilt steering columns. Contains 5 sets of cap screws to be used for various thread requirements. Blow mold case for storage. Includes steering wheel puller. Includes one forcing screw and four sets of cap screws needed for various thread requirements.
Brand8MILELAKE #ad
Manufacturerfreebirdtrading #ad
Height9.2 Inches
Length13.5 Inches
Weight2.87 Pounds
Width2 Inches
Part NumberSteering Tool
ModelSteering Tool

6. OTC


OTC 7984 Master Steering Wheel Service Set

OTC #ad - Complete steering wheel service set. All of the tools you need to remove steering wheels on most of todays vehicles. Includes a forged puller flange with 5 sets of hardened hex head bolts for 2 or 3 way pulling configurations. Covers all lock plates and steering columns. It also includes a set of steering wheel puller legs for steering wheels without tapped holes and a steering wheel pivot pin remove.
BrandOTC #ad
ManufacturerOTC #ad
Height6 Inches
Length16 Inches
Weight6 Pounds
Width14 Inches
Part Number7984
WarrantyLimited Lifetime Warranty



Crankshaft Pulleys and Gears, Use with Harmonic Balancers, and SUVs, Pickups, Steering Wheels, Works with Most Cars, ARES 71000-43-Piece Harmonic Balancer Puller Set

ARES #ad - It covers multiple applications on most cars, steering wheels, crankshaft pulleys, and SUVs on the market today. Aspca business ambassador: we are proud to be part of the aspca business Ambassador Program. Need a manual for this tool? Download it for free on our website! Quality: the forged 4-way slotted puller yoke includes two lengths of grade 5 hardened forcing screws and a set of 4 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening.

Applications: this 43-piece set can be used on a variety of jobs: harmonic balancers, pickups, and gears with tapped holes. If you have any issues with your areS Harmonic Balancer Puller Set, parts, simply contact customer service for troubleshooting help, replacement, or refund. Reliable | effective | efficient: users trust ares to be quality tools.

If you have a pet, they are part of the family. It also includes special stepped bolts for 1990 and Newer GM 3300-3800 V-6 Crankshaft Pulleys. Includes: 1 3/4" center x 4-1/4" diameter heavy-duty 4-way slotted puller yoke; 1 3/4"-16unf x 5-3/8" and 1 3/4"-16unf x 2-3/4" grade 5 hardened live-center forcing screw; 3 5/16"-24 unf x 3" grade 8 stepped bolts; 3 each: 8mm x 1. 25 x 90mm, 8mm x 1. 25 x 45mm, 3/8"-24unf x 1. 5", 5/16"-24unf x 3", 5/16"-18unc x 3.
BrandARES #ad
ManufacturerARES #ad
Part Number71000 70670

8. Alltrade


648748 Mstr Steering Wheel/Lock Plate, Silver

Alltrade #ad - Includes universal steering wheel Puller with 5 different pairs of cap screws to fit the different thread sizes found on most steering wheels. Storage case includes usage photos.

Storage case includes usage photos. Includes lock plate removal tool. For servicing steering wheel and steering column components. Also includes lock plate removal tool. Tool set for servicing steering wheel and steering column components. Includes 5 different pairs of cap screws. Includes 5 different pairs of cap screws. Kit 36 includes 22-Piece for servicing steering wheel and steering column components. Kit 36 includes 22-Piece for servicing steering wheel and steering column components. Tool set for servicing steering wheel and steering column components.
BrandAlltrade #ad
ManufacturerAlltrade Tools #ad
Height3.1 Inches
Length15.7 Inches
Width12.6 Inches
Part Number648748
ModelAlltrade 648748
WarrantyManufacturer Warranty

9. ABN


Harmonic Balancer Puller, Crank Puller 43pc, Steering Wheel Puller, ABN Bolt Grip Set – Gear Puller, Pulley Puller

ABN #ad - Various sizes: bolt sizes – m8x1. 25x90mm, 3/8-16uncx2” inches, 5/16-24unfx3” inches, m8x1.25x45mm, 3/8-16uncx3” inches, 3/8-24unfx1. 5” inches, m8x1. 25x65mm, 3/8-16uNCx4. 5” inches, 5/16-18UNCx3. 5” inches, 1/4-28unfx3” inches, M10x1. 5x35mm. Easy storage: heavy-duty 14.

75” x 3” x 11. 3” inch 37. 5cm x 7. 6cm x 28. 7cm plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization; Compartments include sizing labels for easy identification. Package contents: 43-piece pulley removal tool set includes 1 3-way puller flange/yoke with 4 slots for 2 or 3 hole applications, 4 3-inch and 6-inch live-center adapters, 3 of each size of bolt, 2 different length live-center forcing screws, and 1 carrying case for your convenience.

Get the job done: the abn | deluxe master bolt extractor grip set is designed to be used on your pickup truck, gear pully puller, and small engine vehicle as a steering wheel puller kit, SUVs, harmonic puller, and crank pulley tool; Can also handle 2 and 3-way bolt pulling applications. Built to last: puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity.
BrandABN #ad
ManufacturerABN #ad
Height11.3 Inches
Length14.75 Inches
Weight3.73 Pounds
Width3 Inches
Part Number7054