As an Amazon Associate I earn from qualifying purchases.
1. Speedway Motors #ad
LS1 EFI Fuel Pump And Regulator/Filter Kit #adSpeedway Motors #ad
- Features a high quality 255 lph msd fuel pump capable of 43 gph @ 40 psi or 39 gph at 80 psi. Return port fixed on filter/regulator offering a shorter return line to the fuel tank.
Includes adapters to an6 for filter/regulator and hose nipples for 3/8" inlet and 5/16" outlet on fuel pump. Budget friendly inline fuel delivery kit perfect for an LS swap. All in one filter/regulator is fixed at 58 psi.
2. Speedway Motors #ad
LS Swap Fuel Filter and Fuel Pump Kit #adSpeedway Motors #ad
- Electric fuel pump inlet fitting: 3/8" hose barb, Electric fuel pump outlet fitting: 5/16" Hose Barb. Deluxe ls swap fuel filter / Regulator features AN6 fittings built into assembly. Reduce the number of specialty fittings and adapters in your LS swap fuel system.
Horsepower rating naturally aspirated: 500 HP, 12 volts. Includes deluxe gm ls swap fuel filter/regulator, in-line hi-Pressure Fuel Pump, LS1/LT1 EFI Fuel Line Fitting and Vapor Guard Straight Hose End.
3. EVIL ENERGY #ad
EVIL ENERGY External Fuel Pump 300LPH High Flow 12V 145psi Universal Fit for AN10 Inlet / AN6 Outlet #adEVIL ENERGY #ad
- Notice: evil energy fuel pump only fit 12-volt dc batteries car. Item included: 1pc 300lph high flow external fuel pump, 2pcs spring washers, 2pcs nuts, 1pc flat washer, 1pc internal fuel filter already fitted, 1pc 6AN male outlet adapter, 2pcs rubber connection covers， 2pcs insulated terminals, 1pc 10AN male inlet adapter and 1pc instruction.
Flow rate:300 lph80 gph under 43 PSI3. 0 bar & 12V. Before starting the engine, ensure there are no leaks at any point in the fuel system.
A pre-filter rated at 100 microns MUST be used. Before wiring the pump to the electrical system make sure the polarity is correct.
Operating temperature range: -68 °F-194 °F. Pump flow and test information: flow rate: 200 LPH53 GPH under 75PSI5. 0 bar &12V. Flow rate:255 lph68 gph under 43 PSI3. 0 bar &13. 5v. Operating Voltage:12V. Since it does not require dropping the fuel tank, fuel pump placement and fuel line routing is critical. Failure to use a suitable pre-filter will result in premature failure of the pump.
4. MOSTPLUS #ad
MOSTPLUS Universal 255 LPH High Pressure Fuel Pump External GSL392 6AN Fittings Kit #adMOSTPLUS #ad
- Please check your car information before purchase. Operating pressure: 35-120 PSI final fuel pressure set by regulator. Flow: 255lph at 43psi & 12v, minimum Voltage: 12V. Inline/ external Mounts Outside of Tank.
5. Walbro #ad
Walbro GSL392-400-939 Inline Fuel Pump 255LPH HIGH PRESSURE Universal External Pump #adWalbro #ad
- Variety of pressures and flows available, including high pressure performance. Qs9000 certified. Oe-proven second generation.
All metal shell including inlet and outlet. Fits most efI applications including turbo and supercharged. 10mm x 1mm threaded inlet and outlet accept a variety of fittings.
|Model||GSL-392 GSL392 400-939|
6. MSD #ad
MSD 2225 High Pressure Electric Fuel Pump 43-GPH #adMSD #ad
- 5/16 hose nipple outlet. Fit type: Vehicle Specific. Great for fuel management systems and nitrous booster. 3/8 hose nipple inlet. High pressure electric fuel pump.
|Manufacturer||MSD Ignition #ad|
7. MOSTPLUS #ad
MOSTPLUS 300LPH External Inline Fuel Pump Replaces 0580254044 044 #adMOSTPLUS #ad
- Please check your car information before purchase. Package includes: external fuel pump x 1 ; internal fuel filter already fitted x 1 ; Rubber connection covers x 2 Clips x 2 ; Nuts x 2 Washers x 2 ; 6 AN Male outlet adapater X1 ; 10AN Male Inlet adapter X1.
Dimension: length : 196mm ; diameter : 60mm ; inlet : m18x1. 5 metric; thread outlet : M12x1.
5 metric; thread weight:1, 090 g ; Positive terminal is M6, ground terminal is M5. Interchange 058025044, 300lph under 43PSI;Only Compatible with gasoline car. Externally mounted in rear center of the car or truck; Can be installed along with a high performance walbro intank fuel pump or alone.
8. AEM #ad
AEM 50-1000 High Flow In-Tank Fuel Pump #adAEM #ad
- For gasoline vehicles pump life may be diminished when used with E85 fuel; kit includes fuel pump, rubber sleeve and end caps, hose, pre filter, clamps and flying lead.
Max voltage Input - 18 volts. Power rating given at 43 psi, 13. 5 volt at the pump with a BSFC of. 5, flow capability for horsepower support is ultimately dependent on fuel hose diameter and system electrical voltage and amperage capabilities.
Designed for high output naturally aspirated and forced induction EFI vehicles and tested to flow 340 lph at 40 PSI. 39 millimeter diameter fits most applications; Offset inlet design eases installation and each pump individually tested. In-tank design. Min voltage Input - 6 volts.
9. Walbro #ad
Walbro GSL392 Fuel Pump #adWalbro #ad
- 255 lph / in line. Honda prelude 85-87. All newly made walbro pumps have the TI Automotive brand stamp, not Walbro. Fuel pump Only. Made by ti automotive owner of walbro Brand.