As an Amazon Associate I earn from qualifying purchases.

Provides more thorough cleaning than other methods. With liquid filled gauge-- The liquid-filled gauge for accurate vacuum reading and monitoring chemical flow. Maintain engine performance-- for air intake systems, Combustion Chambers, EGR Valves, Intake Valves and Oxygen Sensors.


Multi-function: the system is not only characteristic of high and low pressure cleaning function. Dimension: pressure: 0-140psi; tank: 600ml; accessories thread size: m8x1.

Intake pipe valve cleaning machine -- an advanced equipment 3-year warranty used to deeply remove highly sticky carbon deposits on the engine intake manifold and intake&exhaust valves.
Note: package not included walnut powder and high-pressure air pump. Walnut powder residual in intake pipe will go to ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts. Built-in dust filter can separate the recovered walnut sand grit from carbon deposits for recycling. Easy to use -- using this engine carbon deposit cleaner after turning off the engine. After thousands of impacts, carbon deposits will be clear thoroughly. This is a closed loop.

Contact us if you need further assistance. Reduce harmful emissions ewk fuel injection service kit cleans gum, varnish, and carbon deposits from air intake systems, combustion chambers, EGR valves, intake valves and oxygen sensors.
You should perform the air intake system service around every 40, 000 miles to make the fuel injectors spray properly and evenly again. Restore gas mileage a car that doesn't run at its optimum performance level may cost you a lot in the long run. This canister provides more thorough cleaning than other methods.


It can be optimally adapted to the cleaning task due to its adjustable control for air pressure and ice rate. Eco- safety: dry ice particles will sublimate and gasify without leaving a mess after cleaning, which greatly save your time and labor-free; it is eco-friendly that will keep equipment safe.
For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours. This effectively reduces the cleaning time and greatly improves efficiency. High-efficiency cleaning: it adopts dry ice cleaning tech, which accelerates the dry ice particles through high-pressure airflow and impacts the deposits, thus removing the carbon buildup thoroughly.

It is environment-friendly material that will not cause pollution. And walnut sand is different from a chemical cleaner.
The walnut sand grit strikes the carbon deposits more powerfully and efficiently with an external air source. Built-in dust filterdust filter can separate the recovered walnut sand grit from carbon deposits for recycling. Walnut powder residual in intake pipe will go to ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts.
1. Berryman Products
#ad
Berryman 2611 Intake Valve and Combustion Chamber Cleaner, 16-Ounce Aerosol
#adBerryman Products #ad - Safe on catalytic Converters and Oxygen Sensors. Not for use In Diesel Engines. Contains polyetheramine “PEA” to Dissolve Carbon Buildup in Combustion Chambers.More information #ad
Formulated for use in all Fuel-Injected Gasoline Engines, Including GDI. Cleans all types of intake valves, tbi, Including Those Found in PFI, and GDI Engines.Brand | Berryman Products #ad |
Manufacturer | Berryman Products #ad |
Height | 8.2 Inches |
Length | 3.5 Inches |
Width | 3.5 Inches |
Part Number | 2611 |
Model | 2611 |
More information #ad
2. FIRSTINFO TOOLS FIT YOUR NEEDS
#ad
FIRSTINFO 4 in 1 Intake Valve Cleaner Combustion Chamber Cleaner & Vacuum System Cleaner & Vacuum System Pressure Tester Kit
#adFIRSTINFO TOOLS FIT YOUR NEEDS #ad - And solution liquid is NOT included. Multiple usages-- use to clean the intake valve, combustion chamber, vacuum system and test the vacuum system pressure. Effectively remove engine carbon deposits and increase gas mileage performance.Provides more thorough cleaning than other methods. With liquid filled gauge-- The liquid-filled gauge for accurate vacuum reading and monitoring chemical flow. Maintain engine performance-- for air intake systems, Combustion Chambers, EGR Valves, Intake Valves and Oxygen Sensors.
More information #ad
Reduce carbon deposits easily. Not" for diesel injector. To make the fuel injectors spray smoothly and properly. Easy to use-- simply fill with air intake cleaning and connect the vacuum hose of vehicle vacuum system. Gasoline engine / petrol cars use-- used for gasoline engine injection and petrol cars.Brand | FIRSTINFO TOOLS FIT YOUR NEEDS #ad |
Manufacturer | FIRSTINFO TOOLS #ad |
Height | 2.76 Inches |
Length | 2.76 Inches |
Weight | 1.32 Pounds |
Width | 9.84 Inches |
Part Number | A1601 |
Model | A1601 |
Warranty | 1. Returns accepted for this item. 2. All returns must include all original items, original packaging, undamaged, unused and in re-saleable condition. 3. Additional return policy details: item must be returned within 14 days after the buyer receives it. (the buyer is responsible for return shipping costs. ) 4. Shipping freight charge is non-refundable. Buyers need to be charged for the initial and returned shipping fee if the item is for free shipping. 5. Refund will be given after receiving all return goods. |
More information #ad
3. BG(0002698761)
#ad
Valve, Combustion Chamber Cleaner, Air Intake, Increases Power Output, Fuel System Cleaner, BG0002698761 Platinum Fuel System Kit
#adBG(0002698761) #ad - Restores performance. Restores fuel efficiency. Deposits are destroyed from Within. Increases power output. Bg platinum air intake, valve & combustion Chamber Cleaner is a diverse blend of cleaning ingredients that break through the nearly impenetrable deposit exterior and deliver potent detergents to the vulnerable center.More information #ad
Brand | BG(0002698761) #ad |
Manufacturer | BG Products #ad |
Part Number | KF65-N1TD |
More information #ad
4. X AUTOHAUX
#ad
X AUTOHAUX Fuel Injection Systems Cleaning Tools Car Fuel System Cleaner Kit for Petrol EFI Throttle Car Engine Non-Dismantle Cleaner Machine Fuel Injector Cleaner 600ML 140PSI C80
#adX AUTOHAUX #ad - Wide application: the injector clean kits include many different kinds of adapters, for Asia, covering almost all for EU, for USA cars and light trucks. The package does not include the cleaning fluid, 1x Adapter Kits, and only for gasoline injectors, not for diesel injectors.Multi-function: the system is not only characteristic of high and low pressure cleaning function. Dimension: pressure: 0-140psi; tank: 600ml; accessories thread size: m8x1.
More information #ad
25, m15x1. 5, m14x1. 5; oil storage Bottle Size: 19x7. 6cm/7. 48"x2. 99"h*d. Function: used to clean the fuel injector and intake system, and the fuel system can be taken out from the cleaning system. Package include: 1x fuel injector cleaner, 1 x Instruction. Please make sure your adapter size before ordering.Brand | X AUTOHAUX #ad |
Manufacturer | X AUTOHAUX #ad |
Part Number | a21101100ux0304 |
More information #ad
5. CATUDIY
#ad
CATUDIY Intake Pipe Valve Cleaner Machine for Car Engine Fuel System Cleaners, Fuel Cleaning Tool Automotive Engine Carbon Deposit Cleaner 110V Valvetronic System Walnut Powder Sand Carbon Deposition
#adCATUDIY #ad - Working principle of engine cleaner -- close the intake valve and then spray walnut powder into engine intake via air pump, while it will recycle the walnut powder through vacuum. Walnut powder will impact the carbon deposits on the inner wall of the intake pipe. Turn the crankshaft to close the intake valve, clean one intake tube at a time, and 6 cylinder engine should be cleaned one by one 6 times and so on.Intake pipe valve cleaning machine -- an advanced equipment 3-year warranty used to deeply remove highly sticky carbon deposits on the engine intake manifold and intake&exhaust valves.
More information #ad
Integrated design -- walnut sand can be sprayed and recycled simultaneously. Safe & efficient -- as an eco-friendly pure natural polish material, walnut sand has advantages of hardness, pressure resistance and wear resistance. Note: package not included walnut powder and high-pressure air pump. Walnut powder residual in intake pipe will go to ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts. Built-in dust filter can separate the recovered walnut sand grit from carbon deposits for recycling. Easy to use -- using this engine carbon deposit cleaner after turning off the engine. After thousands of impacts, carbon deposits will be clear thoroughly. This is a closed loop.
Brand | CATUDIY #ad |
Manufacturer | CATUDIY #ad |
Part Number | ARHA5 |
More information #ad
6. EWK
#ad
EWK Fuel Injection Cleaner Canister Vacuum System Cleaner Intake Valve Pressure Tester
#adEWK #ad - Simply fill with air intake cleaning and connect the vacuum hose of vehicle vacuum system. Excellent working experiencedurable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Improve engine performance clogged and dirty fuel injectors will hurt fuel economy and damage the engine.Contact us if you need further assistance. Reduce harmful emissions ewk fuel injection service kit cleans gum, varnish, and carbon deposits from air intake systems, combustion chambers, EGR valves, intake valves and oxygen sensors.
More information #ad
Effectively remove engine carbon deposits and keep your engine running smoothly. Luckily, you can reduce excessive fuel consumption and maximize gas mileage by EWK intake system cleaner and save more money on gasoline! Accurate control the liquid-filled gauge for accurate vacuum reading and monitoring chemical flow. You should perform the air intake system service around every 40, 000 miles to make the fuel injectors spray properly and evenly again. Restore gas mileage a car that doesn't run at its optimum performance level may cost you a lot in the long run. This canister provides more thorough cleaning than other methods.
Brand | EWK #ad |
Manufacturer | EWK #ad |
Height | 4.33 Inches |
Length | 10.24 Inches |
Width | 4.33 Inches |
Part Number | EB0228 |
Model | EB0228 |
More information #ad
7. Smilyeez
#ad
BG GDI Air Intake & Valve Cleaner PN 260 With Pocket Screwdriver 2
#adSmilyeez #ad - Restores power. Restores MPG. Restores engine performance. Reduces harmful emissions. Requires pressurized tool.More information #ad
Brand | Smilyeez #ad |
Manufacturer | BG Products #ad |
Part Number | 260 |
More information #ad
8. QPKING
#ad
QPKING Pellet Dry Ice Blasters,Dry Ice Blasting Cleaning Machine, Dry Ice Blasters Cleaning, Dry Ice Blast Cleaners, Medical etc. Fields, Automotive, Dry Ice Blasting 110V/220V for Industrial
#adQPKING #ad - Intelligent control panel: dry ice blasting machine is designed with an Intelligent microcomputer inside, which can precisely control the pressure. It can fully clean the carbon deposits in all vehicle parts without disassembling them as well. Three years warranty, lifetime maintenance: for damage caused by non-human factors, we promises to resend parts for free within 3 years.It can be optimally adapted to the cleaning task due to its adjustable control for air pressure and ice rate. Eco- safety: dry ice particles will sublimate and gasify without leaving a mess after cleaning, which greatly save your time and labor-free; it is eco-friendly that will keep equipment safe.
More information #ad
Widely used: dry ice blasting machine is ideally suited for wide applications in automobiles, rubber, plastic, ship, food, chemical, electric power, printing, pharmaceutical, casting, and aviation. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours. This effectively reduces the cleaning time and greatly improves efficiency. High-efficiency cleaning: it adopts dry ice cleaning tech, which accelerates the dry ice particles through high-pressure airflow and impacts the deposits, thus removing the carbon buildup thoroughly.
Brand | QPKING #ad |
Manufacturer | QPKING #ad |
Part Number | MCD11314-7 |
More information #ad
9. FXTUL
#ad
Automotive Intake Valve Cleaner Engine 110V Fuel System Cleaners for Decarbonizing Wash Carbon Deposition Cleaner Engine System Cleaners for Intake Exhaust Pipe Valves, FXTUL Fuel Cleaning Tool
#adFXTUL #ad - 3 years warrantyfor this automotive tool, we will be responsible for the free repair or replacement parts within three years for damage is caused by a non-human factor. Safe and efficientwalnut sand is a pure natural polish material, and it will clean the intake pipe and backside of the intake valve thoroughly without damage and corrosion.It is environment-friendly material that will not cause pollution. And walnut sand is different from a chemical cleaner.
More information #ad
Intake pipe valve cleaning machineautomotive engine cleaner is advanced equipment by external air source to clean engine intake carbon deposition, which can help you keep the engine in healthy status. Deeply remove the carbon depositsdeep removal of carbon deposits on the intake manifold, intake & exhaust valves. The walnut sand grit strikes the carbon deposits more powerfully and efficiently with an external air source. Built-in dust filterdust filter can separate the recovered walnut sand grit from carbon deposits for recycling. Walnut powder residual in intake pipe will go to ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts.
Brand | FXTUL #ad |
Manufacturer | FXTUL #ad |
Height | 16.14 Inches |
Length | 18 Inches |
Width | 16.14 Inches |
Part Number | FAB-995 |
More information #ad