Top 9 Gocart Torque Converter – Automotive Replacement Torque Converters

As an Amazon Associate I earn from qualifying purchases.

1. SUNROAD

#ad

Torque Converter Go Kart Clutch Replacement Kit For Manco Comet TAV2 3/4" 10T #40/41 and 12T #35 Chain Chain not included

#ad
SUNROAD #ad - Replace for comet predator manco;recommended engine: 6. 5 hp 212cc engines, 3/4"shaft with flat key. It can reduce engine load and make your small engine more power, even offer higher speed and smoother acceleration for your engine.

2 sprockets includes: 1 x 12 tooth sprocket for #35 ChainChain not included, 1 x 10 Tooth Sprocket for #40/41 Chain Chain not included. 30 series go kart torque converter clutch kit fit all engines with a 3/4 inch straight crankshaft. Made of high quality iron and aluminum material, which is sturdy, maximum torque, durable, wear-resisting and fast heat dissipation.
BrandSUNROAD #ad
ManufacturerSUNRODA #ad
Height7.48 Inches
Length13.78 Inches
Width13.78 Inches
Part NumberB076BSV32V

2. Mophorn

#ad

12T 35 Chain, 2HP-7HP Engine, For Manco TAV2 30-75 218353A Go Karts, Mophorn Torque Converter Comet Clutch 30 Series Go Kart Clutch 0.75 Inch Replaces Comet, With 3/4" & 5/8" Driven Clutch

#ad
Mophorn #ad - Complete accessories - the kart torque converter includes a 3/4” drive clutch and a 5/8” drive clutch. The 3/4” drive clutch contains a 12 tooth sprocket for # 35 chain. Quality material - this go-kart torque converter is made of high-quality iron and aluminum materials, lightweight, sturdy and durable; it can reduce the engine load and get more power.

Unit replaces - this go-cart torque converter kit replaces oem part numbers: comet 218353a, 203814A, 217610A, 219456A, 219552A, TAV2 30-75, Yelf Dog Drive Unit Q43201W. Important parameters - this kart torque converter has a 3/4" and a 5/8" drive clutch, suitable for all engines with 3/4 "straight crankshaft.

High adaptability - this go-kart torque converter is fully compatible with Comet and TAV2 torque converters, miniature bicycles, motorcycles, all-terrain Cars, small tractors, miniature choppers, karts, widely used in riding lawnmowers, and water skies.
BrandMophorn #ad
ManufacturerMophorn #ad
Part NumberTorque Converter Comet Clutch 12T
ModelCVT

3. IPARTS EXPERT

#ad

New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4" Bore Max Torque

#ad
IPARTS EXPERT #ad - Recommended engine: 2HP-8HP. Replacement for go karts 30 series engine comet manco, 3/4" bore designed for 6. 5hp 212cC engines. It fits all engines with a 3/4" Straight Crankshaft. Made of high quality iron material, sturdy, which is lightweight, wear-resisting and fast heat dissipation.

Featuring 6" diameter with 3/4" bore, 3/16" key way. Replaces comet, Also Fits Manco Go Karts. This driver clutch is designed to work with a belt and driven pulley assembly. It is the combination of elegance and easy to use, portable, maximum torque, firmly and securely, durable, guaranteeing the safety of your car. Small engine torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.

Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. It is produced by the sophisticated technology. With fine workmanship, this clutch can function well exactly as same as the original one. This clutch will help you get more power out of your small engine by reducing engine load. This 3/4" torque converter is a direct replacement kit for the most popular comet tav2 go-kart torque converter 30 series.
BrandIPARTS EXPERT #ad
ManufacturerCoralov-US #ad
Part NumberCL-RN005
Model30 Serie

4. Ameetaa

#ad

212cc Torque Converter 6.5 HP 3/4" Go Kart Clutch 10T 40/41/420 Chain Predator Driver Pulley for 30 Series Manco Comet TAV2 Go Cart Clutch

#ad
Ameetaa #ad - Comet 30 series torque converter kit bolts on to most engines with a horizontal shaft including: Briggs, Honda and clones, Lifan, Robin, Clinton, Kohler, and Tecumseh motors. Package included: 1 x 3/4" driver clutch bore, 1 x plastic assy cover, 1 x overall diameter 6" 5/8" driven pulley, 1 x drive belt, 1 x Full Mounting hardware Kit, 1 x 10 tooth sprocket for #40 #41 #420 Chain Chain not included, 1 x Aluminum Mounting Bracket Plate.

Engine compatability: 6. 5 hp 212cc ohv horizontal Shaft Gas Engine. Engagement range is approximately 2350 rpm; however, atv, riding lawnmowers, go karts, mini bikes, small tractors, motorcycles, mini choppers, this can be adjusted from Minimum 1200 RPM - Maximum 3100 RPM by changing out springs not included and other adjustments.

As pictures Shown. 3/4"shaft with flat key. Replace part number: comet tav2 torq-a-verters 218353a, 219552A, 219456a, 217610A, 203814A 30-75. Comet torque converter kits are used in small vehicles, and waterski winches.
BrandAmeetaa #ad
ManufacturerAmeetaa #ad
Part NumberAMT-GKC003

5. Megaflint

#ad

Torque Converter Go Kart Clutch Set 3/4" 10T 40/41 and 12T 35 Chain for Manco Comet TAV2 30 Series

#ad
Megaflint #ad - This is a complete kit that includes both drive and driven clutch pulleys, Driven unit: Overall Diameter 6" 5/8" driven pulley, aluminum engine mount plate, all mounting hardware. Comet torque converter kits are used in small vehicles, motorcycles, riding lawnmowers, mini choppers, ATV, mini bikes, small tractors, go karts, and waterski winches.

Made of high quality iron and aluminum material, durable, maximum torque, which is sturdy, wear-resisting and fast heat dissipation 30-75. Driver clutch bore: 3/4"19mm, built in jackshaft with sprocket, belt, sprocket teeth: 10 teeth #40/41 chain.

Comet torque converter 30 series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end. Unit replaces:comet 218353a, 217610a, 219552a, 219456a, and 203814A TAV2 30-75.
BrandMegaflint #ad
ManufacturerMF #ad
Part NumberMF-GKC0003

6. Ameetaa

#ad

30 Series, 212cc Torque Converter Go Kart Clutch 3/4 inch 10T 40/41 & 12T 35 Chain Predator Drive Belt Pulley Replace for Manco Comet TAV2 Mini Bike

#ad
Ameetaa #ad - Center to center of driver and driven: 6-15/16 to 7". Replaces for Comet Manco Go Karts. Toruqe converter belt for 6" driven length: 705cm / 27. 76", outside circumference: 27 23/64", Width is 3/4". 1. 9cm / 075". This is a complete kit that includes both drive and driven clutch pulleys, built in jackshaft with sprocket.

30 series torque converter clutch kit this 3/4" torque converter is a direct replacement fits all models of comet TAV2 Torq-A-Verters 218353A, 219456A, 219552A, 217610A. Engine Compatability: 6. 5 hp 212cc ohv horizontal Shaft Gas Engine. Compatible forcomet torque converter kits are used in small vehicles, mini bikes, small tractors, mini choppers, atv, and waterski winches. Go kart torque converter kit includeddriver clutch bore: 3/4", belt, driven unit: overall Diameter 6" 5/8" driven pulley, aluminum engine mount plate, 2 Sprocket teeth: 10 Tooth Sprocket for #40 #41 #420 chain & 12 Tooth Sprocket for #35 Chain Chain not included.

Engagement range is approximately 2350 rpm; however, riding lawnmowers, motorcycles, go karts, this can be adjusted from Minimum 1200 RPM - Maximum 3100 RPM by changing out springs not included and other adjustments.3/4"shaft with flat key. 212cc 6. 5 hp go kart torque converter clutch kit made of high quality iron and aluminum material, durable, maximum torque, which is sturdy, wear-resisting and fast heat dissipation 30-75.
BrandAmeetaa #ad
ManufacturerAmeetaa #ad
Part NumberAMT-GKC001

7. Mophorn

#ad

Mophorn Torque Converter Comet Clutch 30 Series 1" Go Kart Clutch 10T #40 41 Chain and 12T #35 Replaces Comet TAV2 Manco Drive Belt for 4HP-7HP 1"

#ad
Mophorn #ad - Complete accessories - this torque converter clutch includes a 1" drive clutch and a 5/8" drive clutch, a 12" tooth sprocket for # 35 chain, a 10" tooth sprocket for # 40/41 chain. High adaptability - this go-kart torque converter is fully compatible with Comet and TAV2 torque converters, motorcycles, karts, all-terrain Cars, miniature choppers, widely used in riding lawnmowers, small tractors, miniature bicycles, and water skies.

Unit replaces - this go-cart torque converter kit replaces oem part numbers: comet 218353a, 217610A, 219456A, 219552A, 203814A, tav2 30-75, Yelf Dog Drive Unit Q43201W.

Quality material - this go-kart torque converter is made of high-quality iron and aluminum materials, lightweight, sturdy and durable; it can reduce the engine load and get more power. Important parameters - this kart torque converter has a 5/8" driven clutch with an inner diameter of 6" and is suitable for all engines with 1" straight crankshafts.
BrandMophorn #ad
ManufacturerMophorn #ad
Part NumberTorque Converter Comet Clutch 1"
ModelCVT

8. VEVOR

#ad

10 Tooth Sprocket For #40/41 Chain, VEVOR Go Cart Torque Converter 1Inch Go Cart Clutch Kit CVT Go Kart Mini Bike Drivern Clutch, With 5/8" Driven Clutch, For 4-7HP Engine, 12 Tooth For # 35 Chain

#ad
VEVOR #ad - Complete accessories - this torque converter clutch includes a 1" drive clutch and a 5/8" drive clutch, a 12" tooth sprocket for # 35 chain, a 10" tooth sprocket for # 40/41 chain. Quality material - this go-kart torque converter is made of high-quality iron and aluminum materials, lightweight, sturdy and durable; it can reduce the engine load and get more power.

High adaptability - this go-kart torque converter is fully compatible with Comet and TAV2 torque converters, miniature bicycles, motorcycles, small tractors, widely used in riding lawnmowers, miniature choppers, all-terrain Cars, karts, and water skies.

Important parameters - this kart torque converter has a 5/8" driven clutch with an inner diameter of 6" and is suitable for all engines with 1" straight crankshafts. Unit replaces - this go-cart torque converter kit replaces oem part numbers: comet 218353a, 217610A, 203814A, 219552A, tav2 30-75, 219456A, Yelf Dog Drive Unit Q43201W.
BrandVEVOR #ad
ManufacturerVEVOR #ad
Height9.1 Inches
Length14.6 Inches
Width9.5 Inches
Part Numberdrive clutch

9. Ameetaa

#ad

30 Series Go Kart Torque Converter Clutch 3/4" Bore Mini Bike Clutch Driver Pulley Compatible for Comet Manco Max Torque

#ad
Ameetaa #ad - 3/4" bore designed for 6. 5hp 212cC engines. Compatible for go Karts 30 series Engine Comet Manco. Comet torque converter kits are used in small vehicles, motorcycles, riding lawnmowers, ATV, go karts, mini bikes, mini choppers, small tractors, and waterski winches. Work with: 10 tooth sprocket for #40/41/420 chain; 12 Tooth Sprocket for #35 Chain Tooth and Chain aren't included. Made of high quality iron material, sturdy, which is lightweight, durable, maximum torque, portable, wear-resisting and fast heat dissipation.
BrandAmeetaa #ad
ManufacturerAmeetaa #ad
Part NumberAMT-GKC006