As an Amazon Associate I earn from qualifying purchases.







Dual backlit display with both mA measurement and percent of 4 to 20 mA span. Clamp with 4. 5mm 0177 inches jaw opening measures current without touching or interrupting the circuit, and is for use in hard-to-reach applications.

Velcro strap hang your multimeter with the two-way hook made of industrial grade plastic.
1. Klein Tools
#ad
Right Angle, Klein Tools Replacement Test Lead Set
#adKlein Tools #ad - Removable alligator clips attach to wires and other conductors. Standard banana-type inputs compatible with most multimeters and clamp meters. Includes one pair of universal test leads and one set of alligator clips.More information #ad
Leads compatible and fit lead storage compartment on most Klein test and measure products. Leads are 41-inches 1, 041 mm long. Safety rating: category iii 1000V and Category IV 600V.Brand | Klein Tools #ad |
Manufacturer | Klein Tools #ad |
Height | 1 Inches |
Length | 1 Inches |
Weight | 0.2 Pounds |
Width | 1 Inches |
Part Number | 69410 |
Model | 69410 |
Warranty | 1 Year Manufacturer |
More information #ad
2. Fluke
#ad
Fluke TLK282 SureGrip Deluxe Automotive Test Lead Kit
#adFluke #ad - Also includes suregrip alligator clip set, SureGrip hook clip set, SureGrip large jaw alligator clip set, soft case. Use the back probe pins to slide into weather pack connectors on fuel injectors, TPS and Map sensors.More information #ad
Kit includes insulation piercing clip set, automotive back probe pins 5, Suregrip silicone test lead set, Suregrip test probe set. A hook probe with plunger actuation allows quick connection to pins or exposed conductors. Tested to 60 volts DC.Brand | Fluke #ad |
Manufacturer | Fluke Corporation #ad |
Height | 2 Inches |
Length | 12 Inches |
Weight | 0.55 Pounds |
Width | 6 Inches |
Part Number | 2150744 |
Model | TLK282 |
Warranty | 1 year |
More information #ad
3. ANCIRS
#ad
ANCIRS 2mm Needle Test Probes, 600V/10A Non-Destructive Multimeter Test for Fluke Leads tl71 tl75
#adANCIRS #ad - Cat ii 600v/10a. High quality material: this multimeter test probe is made of premium nickel plated copper material, very good sensitivity, accuracy and stable performance. Fit for: fluke multimeters and fluke test leads tl71 tl75.More information #ad
Other highlights: anti-breaking soft handle, copper needle and operable test probe can perform the most sensitive and accurate test. Style: this test probes is suitable to be inserted into a 2mm connector, and the end connector can be inserted into a 4mm banana connector.Brand | ANCIRS #ad |
Manufacturer | ANCIRS #ad |
Part Number | AN2179 |
More information #ad
4. TKDMR
#ad
1000V 20A Ultra-Sharp Multimeter Meter Tester Needle Point 35″ / 90 cm Gold-Plated Test Probe Lead
#adTKDMR #ad - 3. Weight : 80g;package content : 1 Pair x Multimeter Probe. Black and red needle point test probe. 2. High quality with special sharpness and gilding.More information #ad
Around 1 meter length with terminal. 1. Product name : multimeter probe kit; connector Type : Banana Plugs, Testing Pin;Cat III : 1000V. 4. Easy access to ics, etc. Resistance of the probes: Brand | TKDMR #ad |
Manufacturer | TKDMR #ad |
Height | 1.1 Inches |
Length | 5 Inches |
Weight | 0.15 Pounds |
Width | 1.1 Inches |
Part Number | TKDMR-td01 |
Model | CECOMINOD007025 |
More information #ad
5. Fluke
#ad
Fluke 87V/E2 Industrial Electrician Combo Kit
#adFluke #ad - Maximum conductance of 6000 ns. Maximum resistance of 50 mω and a maximum capacitance of 9, 999 μf. Temperature range 2000 °c to 1090 °c 328 °f to 1994 °f excluding probe. Measure upto 10 a, 20 a for upto 30 seconds.More information #ad
Input alert provides audible warning against wrong use of input jacks. Overvoltage category: en 61010 1 to 1000 v cat iii, 600 v cat iv. Selectable filter for accurate voltage. The 87v meter has a maximum voltage of 1000 for both AC & DC.Brand | Fluke #ad |
Manufacturer | Fluke #ad |
Height | 4 Inches |
Length | 9.5 Inches |
Weight | 0.78 Pounds |
Width | 7.5 Inches |
Part Number | 2670150 |
Model | Fluke 87V/E2 |
Warranty | 1 Year Warranty |
More information #ad
6. Fluke
#ad
Measures Frequency, Includes Low-Pass Filter For Motor Drive VFD, True-RMS, Fluke 1587 FC 2-in-1 Insulation Multimeter, Pi/DAR Timed Ratio Tests, Selectable Insulation Test Voltages Up To 1000 V
#adFluke #ad - Pi polarity index /dar dielectric absorption ratio with Trend It graphs identifies problems faster. Insulation test voltages 50 v, 500 v, 250 V, 100 V, 1000 V. Memory storage through mobile Fluke Connect Measurements App eliminates writing down results, reduces errors and saves data for historical tracking over time.More information #ad
Vfd low pass filter for accurate motor drive measurements; Includes auto discharge of capacitive voltage for added user protection. Temperature compensation through App helps establish accurate baselines and relevant historical comparisons.Brand | Fluke #ad |
Manufacturer | Fluke Corporation #ad |
Height | 4 Inches |
Length | 14 Inches |
Weight | 0.66 Pounds |
Width | 10.5 Inches |
Part Number | FLUKE-1587 FC |
Model | 4691215 |
More information #ad
7. Fluke
#ad
Fluke 87V MAX True-RMS Digital Multimeter, Includes TL175 Test Leads, Up to 800 Hour Battery Capacity, Built-In Thermometer, Waterproof and Dustproof IP67 Rated, Rugged, Withstands Drops Up To 13 Feet
#adFluke #ad - True-rms accuracy with all functions of 87v and upgraded test leads. Fully waterproof and dustproof with IP67 rating and 4-meter drop proven.More information #ad
Lifetime, backed by a brand you trust. Safety rated cat iii 1000 v, cat iv 600 v meter to get you home safely from the job. Built to take too harsh and extreme environments.Brand | Fluke #ad |
Manufacturer | FLUKE NETWORKS #ad |
Height | 3 Inches |
Length | 10 Inches |
Width | 6 Inches |
Part Number | FLUKE-87V-MAX |
Model | FLUKE-87V-MAX |
More information #ad
8. Fluke
#ad
Fluke 773 Advanced Milliamp Process Clamp-Meter
#adFluke #ad - Automatic power off. Digital clamp-meter for 24v loop circuits measures DC to 100mA via clamp and to 24mA in circuit, and DC voltage to 30V. 4 to 20 ma scaled output.Dual backlit display with both mA measurement and percent of 4 to 20 mA span. Clamp with 4. 5mm 0177 inches jaw opening measures current without touching or interrupting the circuit, and is for use in hard-to-reach applications.
More information #ad
Meets en and iec safety standards 61010-1 and 61010-2-032. Meter can source and simulate dc signals from 4 to 20mA, can source DC voltage signals up to 10V, and is accurate to 02% with a resolution of 001mA. Measure up to 99. 9 ma range non-contact. Built-in 24v loop power supply to power a transmitter and measure its milliamp output signal. Measurement spotlight.Brand | Fluke #ad |
Manufacturer | Fluke Corporation #ad |
Height | 3.05 Inches |
Length | 12.6 Inches |
Weight | 2.5 Pounds |
Width | 16.05 Inches |
Part Number | 3362365 |
Model | FLUKE-773 |
Warranty | 3-Year for electronics, one year for cable and clamp assembly |
More information #ad
9. ZIBOO
#ad
2 Clips and Magnetic Hanger, ZIBOO ZB-TPAK Multimeter Meter Hanging Kit for Fluke Meters,2 Straps
#adZIBOO #ad - The strap is 7in long and forms a loop with a secure velcro attachment. Hanger attachment to hang meter on hook, nail, wire, bar or other objects. Zb-tpak magnetic multi meter loop hanging kit works with most fluke meters including: 15b+ 17b+ 18b+, 180, 233 and 28 II Multimeters, 110, 87v and 83v, 170, 724, CNX 3000, 70 Series III, 280 series, 3000 FC, 725 and 789.Velcro strap hang your multimeter with the two-way hook made of industrial grade plastic.
More information #ad
A soft rubber coating makes the magnet easier to use and protects surfaces from scratches. This ziboo zb-tpak magnetic hanging strap makes it easy. Powerful rare earth magnetic hanger: allows you to hang on any metallic surfaces, Solves almost any hanging and positioning problem you may face.Brand | ZIBOO #ad |
Manufacturer | ZIBOO #ad |
Part Number | ZB-TPAK |
More information #ad