Top 9 Damper rod holder – Powersports Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Motion Pro

#ad

Motion Pro 5-In-1 Damper Rod Bleed Tool

#ad
Motion Pro #ad - Perfect for working on Kayaba, Showa and WP inverted forks. Five thread sizes in one tool:m10 x 1. 0, m10 x 1. 25, m12 x 1. 0, m12 x 1. 25 and m14-1. 0 Rod includes downward facing bleed port to prevent oil splatter. One piece design means no lost parts. Tool design allows for effortless retrieval of damping rod after spring installation.
BrandMotion Pro #ad
ManufacturerMotion Pro #ad
Height0.8 Inches
Length14 Inches
Weight0.35 Pounds
Width0.8 Inches
Part Number08-0648
Model8542064025

2. Laser

#ad

Laser 7319 Motorcycle Fork Damper Rod Holding Tool 10.3 mm/12.7mm-7319

#ad
Laser #ad - Double ended 103mm & 12. 7mm. Use in accordance with the fork manufacturers instructions. This holding tool is used in conjunction with the Laser 6353 - fork spring compressor. Designed to slide in under the damper rod nut to hold the spring down to allow the nut and fork cap to be separated. Used to assist in fork service and repair.
BrandLaser #ad
ManufacturerThe Tool Connection #ad
Height7.87 Inches
Length0.24 Inches
Weight0.11 Kilograms
Width3.15 Inches
Part Number7319
Model7319

3. Motion Pro

#ad

Motion Pro 08-0117 Damper Rod Fork Tool

#ad
Motion Pro #ad - Hardened steel with black finish. Is used in applications where the manufacturer recommends the following tools: Honda - OEM tool number v07PMB-KZ4010A/ Yamaha - OEM tool number YM-01423. Aids in assembly and disassembly of most 41, 43, 46 and 47 Kayaba and Showa inverted forks.
BrandMotion Pro #ad
ManufacturerMotion Pro #ad
Height1.5 Inches
Length15 Inches
Weight0.6 Pounds
Width1.5 Inches
Part Number08-0117
Model08-0117

4. WENSHENG

#ad

WENSHENG Car Hood Holder 2PCS Hood Damper Lift Strut Support Rod Hydraulic Hood Car Accessories Fit for Peugeot 4008/5008 2017 On Car Lift Supports Rods Hood Prop Rod Clip

#ad
WENSHENG #ad - The cylinder tubes are cold rolled and painted with epoxy paint. Self cleaning piston Assembly, and then galvanized, Multiple processing prolongs lift struts life.

This is auto specific front bonnet damper replacement kit. On the basis of original equipment design and perfect engineered, make sure exact fit and function. Improve the appearance and handling of your engine compartment. Advanced process - the rods are straightly aligned, round grinded, polished. Function - use compressed gas, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, contained in a cylinder and compressed by a piston, no need to hold the door up with your head.100% brand new, high quality! 2. 1.
BrandWENSHENG #ad
ManufacturerWENSHENG #ad
Weight2.2 Pounds
Part NumberWENSHENG123

5. WENSHENG

#ad

WENSHENG Car Hood Holder 2PCS Hood Damper Lift Strut Support Rod Hydraulic Hood Car Accessories Fit for Odyssey 2013-2017 Car Lift Supports Rods Hood Prop Rod Clip

#ad
WENSHENG #ad - The cylinder tubes are cold rolled and painted with epoxy paint. Self cleaning piston Assembly, Multiple processing prolongs lift struts life. Advanced process - the rods are straightly aligned, round grinded, and then galvanized, polished.

Function - use compressed gas, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, contained in a cylinder and compressed by a piston, no need to hold the door up with your head.11. Improve the appearance and handling of your engine compartment. This is auto specific front bonnet damper replacement kit. On the basis of original equipment design and perfect engineered, make sure exact fit and function. 100% brand new, high quality! 2.
BrandWENSHENG #ad
ManufacturerWENSHENG #ad
Weight2.2 Pounds
Part NumberWENSHENG123

6. Racetech

#ad

Race Tech Damping Rod Holding Tool TFDH01

#ad
Racetech #ad - Taper wedges into most damping rods, holding the rod securely in place. Tapered aluminum rod designed to make spinning damper rods easier to remove.
BrandRacetech #ad
ManufacturerRace Tech #ad
Weight1.3 Pounds
Part NumberTFDH 01

7. BikeMaster

#ad

BikeMaster 1/2 inches Drive 15mm-25mm Motorcycle Damper Rod Holding Tool

#ad
BikeMaster #ad - Drive will work with All 3/8in. Sold Each. Black oxide Finish For Longer Life. A must have tool For Servicing Forks. Ratchets And Extensions. Provides an easy way to hold the inner Damper Rod During Removal Of Bottom Fork Leg Bolt. 3/8in.
BrandBikeMaster #ad
ManufacturerBikeMaster #ad
Height1.7 Inches
Length6.1 Inches
Weight1 Pounds
Width3.5 Inches
Part Number12966
Model12966

8. WENSHENG

#ad

WENSHENG Car Hood Holder 1 Set Front Hood Gas Strut Damper Lift Strut Support Rod Hydraulic Hood Jackstay Fit for Toyota CHR C-HR 2017 2018 Car Accessories Automobile Strut Damper Hood Prop Rod Clip

#ad
WENSHENG #ad - The cylinder tubes are cold rolled and painted with epoxy paint. Self cleaning piston Assembly, round grinded, Multiple processing prolongs lift struts life. Function - use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, no need to hold the door up with your head.

2. Will not be deformed under high and low temperature conditions, anti-corrosion, the lifting bracket is durable, anti-rust, durable.11. Making opening and closing easy and flexible, convenient and safe. Advanced process - the rods are straightly aligned, and then galvanized, polished. This is auto specific front bonnet damper replacement kit. On the basis of original equipment design and perfect engineered, make sure exact fit and function.
BrandWENSHENG #ad
ManufacturerWENSHENG #ad
Weight2.2 Pounds
Part NumberWENSHENG123

9. WENSHENG

#ad

Car hood holder 2Pcs Hood Cover Hydraulic Rod Car Gas Shock Hood Strut Damper Front Engine Hood Support Rod Lift Fit For Hyundai Elantra AD Avante 2015-2019 hood prop rod clip Color : Black

#ad
WENSHENG #ad - Quality: the automobile hydraulic rod is made of excellent materials with long service life, anti-rust, not easy to crack, anti-corrosion, high hardness, and durable. The cylinder tubes are cold rolled and painted with epoxy paint.

Self cleaning piston assembly, and then galvanized, round grinded, Multiple processing prolongs lift struts life. This is auto specific front bonnet damper replacement kit. On the basis of original equipment design and perfect engineered, make sure exact fit and function. Advanced process - the rods are straightly aligned, polished. Function - use compressed gas, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, contained in a cylinder and compressed by a piston, no need to hold the door up with your head.

Function: use compressed gas contained in the cylinder and compressed by the piston to apply force when opening the front cover to support the weight of the front cover.
BrandWENSHENG #ad
ManufacturerWENSHENG #ad
Weight1.67 Pounds
Part NumberWENSHENG123