Top 9 BTR Stage 1 Truck Cam – Automotive Replacement Engine Cam & Lifter Kits

As an Amazon Associate I earn from qualifying purchases.

1. Michigan Motorsports

#ad

Brian Tooley Racing BTR Truck Stage 1 Cam and Beehive Spring Kit LS 4.8 5.3 6.0 Fits Silverado Sierra Vortec

#ad
Michigan Motorsports #ad - Our vortec truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available.

The stg 1 cam is our entry level cam for use in pratically any LS engine where great low speed torque is desired. With it's narrower lsa, this cam will make more low end torque than a production LS6 cam will. The brian tooley vortec racing truck cam kit includes: Stage 1 Truck Cam, Beehive Springs and Set of VS LS Hat Seals. Specs are 206/212. 525/. 534 114+2. Recommended for trucks used for towing and wanting for torque over stock. Brian tooley racking btr truck stage 1 cam Kit 4. 8 5. 3 6. 0 cam and Beehive Spring Set. This is a step-up from the lm7 stock cam.
BrandMichigan Motorsports #ad
ManufacturerMichigan Motorsports #ad
Part NumberBTR Truck Cam Kit Stage 1

2. Michigan Motorsports

#ad

Brian Tooley BTR Stage 2 Truck Camshaft Springs, Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 Camshaft, Spring Set and Gasket Kit

#ad
Michigan Motorsports #ad - Oem torque converters play happily with these grinds. These camshafts have a 3-bolt from toy haulers to trucks turned street rods, Seals, Gaskets for Water Pump, Crank Bolt, our V2 truck cam lineup has an answer for your needs. The end result is a revised camshaft that provides more average torque, higher peak power, and a maximum depth heat treatment.

As opposed to grinding all the camshafts from the same starting core, they each have their own respective core to begin. The maximum heat treat depth is achieved by having cam cores made within a few thousandths of final grind size. Camshaft, timing cover, beehive springs, & front seal. Brian tooley 2 btr stage 2 truck cam v2 212/218. 553"/. 553" 111 99-13 gm truck applications Beehive Springs and Cam Install Gasket Kit.

The stage 2 grind is a great middle-ground for people looking for added power, while keeping OEM driving characteristics in check. From toy haulers to trucks turned street rods, our v2 truck cam lineup has an answer for your needs. If you need to hook up to a trailer and hit the road for the weekend, this grind will give you more average torque than the previous iteration of the truck series. We have partnered with an OEM Tier 1 supplier to grind the new V2 series.
BrandMichigan Motorsports #ad
ManufacturerBrian Tooley #ad
Height50 Centimeters
Length100 Centimeters
Weight100 Kilograms
Width100 Centimeters
Part NumberBTR 31218110

3. Michigan Motorsports

#ad

Brian Tooley BTR Stage 4 Low Lift Truck Camshaft Beehive Springs, Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 Includes LS6 Single Beehive Valve Springs and Gasket Kit Camshaft, Spring Set and Gasket Kit

#ad
Michigan Motorsports #ad - The ideal note of this camshaft is distinct. As opposed to grinding all the camshafts from the same starting core, they each have their own respective core to begin. From toy haulers to trucks turned street rods, higher peak power, our v2 truck cam lineup has an answer for your needs.

Our all new v2 series was born from the demands of an ever changing market. Brian tooley 4 low lift btr stage 2 truck cam v2 99-13 GM Truck Applications Includes Beehive Springs, Seals, Gasket Kit. The maximum heat treat depth is achieved by having cam cores made within a few thousandths of final grind size. It has the 'lope' that many are looking for when sitting at a stoplight. Brian tooley racing is proud to introduce the next chapter in the performance GM Truck saga. The end result is a revised camshaft that provides more average torque, and a maximum depth heat treatment.

Includes pac racing springs beehive springs, & front seal. From the team that brought the industry's number 1 selling gm truck camshafts to market. The stage 4 grind has made a name for itself not only in the truck world, but in the street car market as well. From toy haulers to trucks turned street rods, vs ls Hat Seals, Crank Bolt & Gaskets for Water Pump, Timing Cover, our V2 truck cam lineup has an answer for your needs. The grind moves the powerband upstream, so bottom end torque will not be ideal for the every day tow vehicle.
BrandMichigan Motorsports #ad
ManufacturerBrian Tooley #ad
Part NumberBTR 32430090

4. Michigan Motorsports

#ad

Texas Speed TSP Stage 1 Low Lift Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 Camshaft and Springs Only

#ad
Michigan Motorsports #ad - With a 112 lobe separation Angle LSA. These cams are designed specifically for 4. 8 5. 3 6. 0 combinations. Includes Camshaft and Beehive Springs. This cam gained 45. 1 hp and 21. 5 tq at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5.

3l engine! this cam uses proprietary tsp lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market! It is a great choice for those looking for a sleeper camshaft for their 4. 8l or 5. 3l. These camshafts have a 3-bolt timing gear pattern. 1200-5600 rpm power band; this is an excellent performance camshaft with a smooth idle! we've had tons of customers select this camshaft when looking for a cam that drives almost stock, and can be hidden with some exhaust systems! If you're looking for a small, stealth camshaft the 208/214 is a great option to consider.

Texas speed low lift 208/214,. 550/. 550, 112 lsa camshaft. It is ideal for 4. 8l and 5. 3l trucks that want to keep their factory torque converter and not break the bank on more expensive valve springs and pushrods.
BrandMichigan Motorsports #ad
ManufacturerTexas Speed #ad
Part NumberTSP 25-TSPLL208214112

5. Michigan Motorsports

#ad

Brian Tooley Racing BTR Truck Stage 3 Cam Beehive Springs and Pushrod Kit Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2

#ad
Michigan Motorsports #ad - Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance. Stage iii camshaft specs specs: 218/224.

553/. 553 110+0 requires a 3 bolt timing gear. The brian tooley vortec racing truck cam kit includes: stage 3 Truck Cam, Beehive Springs, Set of VS LS Hat Seals, 7.400 chromoly Pushrods. You sacrifice some low end torque in the pursuit of more power higher in the RPM range, Sierra, it is still a tow-friendly camshaft, just not ideal for the everyday hauler. Stage 3 specifics: the stage 3 v2 camshaft is an amazing all around grind for the truck enthusiast. Brian tooley racing btr stage 3 truck cam, beehive Springs and 7. 400" chromoly Pushrods 4. 8 5. 3 6. 0 . An aftermarket converter is highly recommended with this grind. Excellent for 4. 8 5. 3 6.
BrandMichigan Motorsports #ad
ManufacturerMichigan Motorsports #ad
Part NumberA7500+A6400+A6500+72400

6. Michigan Motorsports

#ad

Brian Tooley Racing BTR Vortec Truck Stage 4 Cam and Beehive Racing Springs 4.8 5.3 6.0

#ad
Michigan Motorsports #ad - Also used in 6. 0 and 6. 2 truck engines. Requires around a 3000-3200 converter. The brian tooley vortec racing truck cam Kit includes: Stage 4 Truck Cam, Beehive Racing Springs and LS Hat Seals. Specs are 224/230553"/. 553" 109. Brian tooley racing btr truck stage 4 cam kit 4. 8 5. 3 6. 0 cam and beehive Springs and Valve Seals. Requires a 3 bolt cam gear.
BrandMichigan Motorsports #ad
ManufacturerMichigan Motorsports #ad
Height50 Centimeters
Length100 Centimeters
Weight100 Kilograms
Width100 Centimeters
Part NumberBTR TRUCK CAM KIT stage 4

7. Michigan Motorsports

#ad

Michigan Motorsports 7.400 Pushrods Fits 4.8 5.3 5.7 6.0 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92

#ad
Michigan Motorsports #ad - These are the stock length 7. 400" long 5/16" pushrods. Ls 7. 400" pushrods. Set of sixteen 16 stock replacement pushrods for 1997-2012 GM LS-series GEN III and IV small block V-8 engines. Fits 4. 8 5. 3 5. 7 6. 0 ls1 ls2 ls3 ls6 l99 ls4 ls9 lsa lq4 lq9 l76 l92. Pushrod specifications are as follows: overall length: 7. 400" tube size: 5/16" x. 075" stock material: 1010 ends: 5/16" ball drilled.
BrandMichigan Motorsports #ad
ManufacturerMichigan Motorsports #ad
Height50 Centimeters
Length100 Centimeters
Width100 Centimeters
Part NumberA2500

8. Michigan Motorsports

#ad

Brian Tooley Racing BTR Vortec Truck Stage 2 Cam and Spring Kit 4.8 5.3 6.0 Includes Beehive Springs and Valve Seals

#ad
Michigan Motorsports #ad - The brian tooley vortec racing truck cam Kit includes: Stage 2 Truck Cam, Beehive Springs and LS Hat Seals. The stage ii cam has more of a noticable idle, with even more average torque production than the Stage I cam, at the sacrifice of some low end torque and fuel mileage.

Specs are 212/218. 553/. 553 111. This is the largest cam we recommend to run with stock 4L60E converter in a 4. 8/5. 3. These vortec truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available. Brian tooley racing btr truck stage 2 camshaft Kit 4. 8 5. 3 6. 0 camshaft and Beehive Springs and Valve Seals.
BrandMichigan Motorsports #ad
ManufacturerMichigan Motorsports #ad
Part NumberBTR TRUCK CAM KIT stage 2

9. Michigan Motorsports

#ad

Brian Tooley Racing BTR Truck Stage 3 Cam Camshaft 4.8 5.3 6.0 6.2…

#ad
Michigan Motorsports #ad - You sacrifice some low end torque in the pursuit of more power higher in the RPM range, but gain an idle note that is distinctly BTR! With more average torque than the V1 Stage 3 grind, it is still a tow-friendly camshaft, just not ideal for the everyday hauler. Will work with stock converter in some trucks, each grind has their own respective core.

An aftermarket converter is highly recommended with this grind. Brian tooley racing truck stage 3 Cam LS 4. 8 5. 3 6. 0 Requires a 3 bolt cam gear. Made right here in the USA!110 btr is proud to introduce the next chapter in the performance GM Truck saga. Specs: 218/224. 553”/. 553” 110 stage 3 specifics: the stage 3 camshaft is an amazing all around grind for the truck enthusiast. The end result is a revised camshaft that provides more average torque, as opposed to grinding all the camshafts from the same starting core.

The maximum heat treat depth is achieved by having cam cores made within a few thousandths of final grind size, higher peak power, and more durability than anyone else in the industry. Now, but recommended to install a 2800-3000 converter for best overall performance. Our truck cams were designed with low lift so gm ls2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available.
BrandMichigan Motorsports #ad
ManufacturerBrian Tooley Racing #ad
Part NumberA7500