Top 8 CV Shaft 2500HD 4×4 GMC Sierra – Automotive Replacement Constant Velocity Half-Shaft Assemblies

As an Amazon Associate I earn from qualifying purchases.

1. Cardone Select

#ad

Cardone 66-1009 New CV Constant Velocity Drive Axle Shaft

#ad
Cardone Select #ad - Cv drive axle measurements are validated after assembly to ensure a proper fit; Threads are precision rolled to ensure proper fit when axle nut is installed.

An axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or stripped. Proprietary engineering processes ensure that all CV Drive Axles meet OE form, fit and function. Neoprene boots are designed with additional bellows, to resist bellow stress and cracking, when needed, which is the leading cause of boot failure. Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.
BrandCardone Select #ad
ManufacturerCardone #ad
Height6.4 Inches
Length29.5 Inches
Weight6.38 Pounds
Width6.4 Inches
Part Number66-1009
Model66-1009

2. Detroit Axle

#ad

Detroit Axle 515058 Front Wheel Bearing Hub Assembly for Chevy Silverado Avalanche Suburban GMC Sierra Yukon 1500HD 2500 2500HD 1999-2007 Hummer H2 4x4 2003-2007 8 Lug 2pc Set

#ad
Detroit Axle #ad - Fits 4x4 4wD Models. Fits 1999 2000 2001 2002 2003 2004 2005 2006 2007 chevy silverado suburban Avalanche 1500HD 2500 2500HD. Fits 2003 2004 2005 2006 2007 hummer H2. Fits 1999 2000 2001 2002 2003 2004 2005 2006 2007 gmc sierra yukon 1500hd 2500 2500HD. Flange type: 4-bolt square | Lug Count: 8 | Abs Type: Sensor.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height10 Inches
Length16 Inches
Weight32 Pounds
Width8 Inches
Part Number515058-DA
Model515058

3. Cardone

#ad

Cardone 66-1325 New CV Axle

#ad
Cardone #ad - Threads and splines are precision rolled for hassle-free replacement. Neoprene boots designed with additional bellows where necessary to reduce stress and ozone cracking. Transmission seal diameter is precision machined after heat treatment to ensure correct surface finish, promoting long seal life. 3 percent moly grease provides excellent high temperature characteristics for longer life and better wear.
BrandCardone #ad
ManufacturerCardone #ad
Height6.38 Inches
Length29.5 Inches
Weight6 Pounds
Width6.38 Inches
Part Number66-1325
Model66-1325
WarrantySee manufacturer

4. DRIVE TECH AMERICA

#ad

Hummer H2, DTA DT1207520751 2 Front CV Axles Compatible with Avalanche 2500, 3500, 3500 Suburban 2500, Sierra 2500, Silverado 2500

#ad
DRIVE TECH AMERICA #ad - 12 months or 12, 000 miles product warranty. Guarantee proper fit and easy installation. Meets or exceeds OEM Spec. Excellent tolerance to resist high and low temperatures. Qs 9000 and iso 9002 quality certified.
BrandDRIVE TECH AMERICA #ad
ManufacturerDRIVE TECH AMERICA #ad
Weight40 Pounds
Part NumberDT1207520751
WarrantyDTA warrants that the products are free from defects in material and workmanship for 12 months or 12000 miles. DTA’s warranty covers part only, does not cover any labor cost or any other cost incurred due to the failure of the part. DTA’s product liability is strictly limited to the replacement of the unit once DTA has determined it to be defective. DTA’s warranty is voided if the product is installed in a vehicle that has been modified. DTA’s warranty is voided if the part has been altered, damaged, misused or improperly installed.

5. Cardone Select

#ad

Cardone 66-1430 New CV Constant Velocity Drive Axle Shaft

#ad
Cardone Select #ad - An axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or stripped.

Proprietary engineering processes ensure that all CV Drive Axles meet OE form, fit and function. Neoprene boots are designed with additional bellows, to resist bellow stress and cracking, when needed, which is the leading cause of boot failure. Cv drive axle measurements are validated after assembly to ensure a proper fit; Threads are precision rolled to ensure proper fit when axle nut is installed. Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.
BrandCardone Select #ad
ManufacturerCardone #ad
Height0 Inches
Length0 Inches
Weight20 Pounds
Width0 Inches
Part Number66-1430
Model66-1430
WarrantyLimited Lifetime

6. Detroit Axle

#ad

Detroit Axle, 8-Lug Front Upper Control Arms w/Ball Joints + Tie Rod End + Sway Bar Link Suspension Kit Replacement for Chevy GMC Sierra Silverado Suburban 1500 2500 HD Hummer H2-13pc Set

#ad
Detroit Axle #ad - Front end suspension kit upper control arm Assembly Ball Joint Assembly Tie Rod Stabilizer Bar Idler Arm Pitman Arm Idler Bracket Pivot. The parts in this kit are replacement for chevy silverado 2500 gmc sierra 1500 hd front Ball Joint Kit Control Arm Upper Stabilizer Bar Link; Suburban 2500 Hummer H2 Lower Ball Joint Tie Rod Kit Sway Bar Stabilizer Link.

Front sway bar kit Upper Control Arm Stabilizer Sway Bar. Replacement for 2001 2002 2003 2004 gmc sierra 2500; 2007 2008 2009 2010 chevy silverado 3500 hd gmc sierra 3500 hd; 2001-2009 Chevrolet Silverado 2500 . 10-year warranty. Replacement for 2000-2012 chevy suburban 2500 and gmc yukon xl 2500 2000: 4wd only; 2002-2006 chevrolet avalanche 2500; 2003-2009 Hummer H2.

Detroit axle is a leading supplier of brake kit, front suspension kit. Replacement for 8-lug models only; pitman armw/ 3 grooves/splines. Replacement for 2001-2003/ 2005-2006 chevy silverado 1500 hd silverado 3500 and gmc sierra 1500 HD. Front upper ball joint lower ball Joint Tie Rod Inner Outer Tie Rod End Sway Bar Kit. Upper control arm with ball joint Inner Tie Rod Sway Bar Linkage Inner Outer Tie Rods.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height16 Inches
Length24 Inches
Weight26 Pounds
Width6 Inches
Part Number80090-13

7. Cardone

#ad

Cardone 66-1345 New CV Axle

#ad
Cardone #ad - Neoprene boots designed with additional bellows where necessary to reduce stress and ozone cracking. Threads and splines are precision rolled for hassle-free replacement. Transmission seal diameter is precision machined after heat treatment to ensure correct surface finish, promoting long seal life. 3 percent moly grease provides excellent high temperature characteristics for longer life and better wear.
BrandCardone #ad
ManufacturerCardone #ad
Height5 Inches
Length29.5 Inches
Weight18.55 Pounds
Width5 Inches
Part Number66-1345
Model66-1345
WarrantyLimited Lifetime, Part Only

8. Cardone Select

#ad

Cardone 66-1325HD New CV Constant Velocity Severe-Duty Drive Axle Shaft

#ad
Cardone Select #ad - Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing. An axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or stripped.

Proprietary engineering processes ensure that all CV Drive Axles meet OE form, fit and function. Cv drive axle part numbers with an “hd” suffix are severe-duty applications and include a thermoplastic outboard boot for increased life and durability versus a traditional neoprene boot. Cv drive axle measurements are validated after assembly to ensure a proper fit; Threads are precision rolled to ensure proper fit when axle nut is installed.
BrandCardone Select #ad
ManufacturerCardone #ad
Height6.38 Inches
Length29.5 Inches
Weight100 Kilograms
Width6.38 Inches
Part Number66-1325HD
Model66-1325HD
WarrantyLimited Lifetime