Top 8 Conical Pitman Arm Puller 8150 – Special Application Pullers

As an Amazon Associate I earn from qualifying purchases.

1. OTC


OTC 8150 Conical Pitman Arm Puller

OTC #ad - Spread is 1-1/2 inch. Reach of 2-1/2 inches. Conical design allows the puller to fit securely on the Pitman arm. Designed to fit Pitman arms on domestic cars and light trucks. 3/4-16 x 4-3/4 inch forcing screw provides enough power to remove stubborn Pitman arms.
BrandOTC #ad
ManufacturerOtc #ad
Height3.75 Inches
Length7.25 Inches
Weight3.9 Pounds
Width2.75 Inches
Part Number8150
WarrantyLimited lifetime warranty



Light Trucks 8150, Conical Pitman Arm Puller

MAMAY SUMARNA #ad - Large forcing screw for more power, Designed to pull stubborn Pitman arms. Conical design for strength and secure fit, 3/4-16 X 4-3/4" forcing screw for power, Designed to fit Pitman arms on domestic cars and light trucks. Condition : New.
ManufacturerMAMAY SUMARNA #ad
Part NumberTooltopia8&1_VD_041

3. OTC


OTC 7311A Pitman Arm Puller

OTC #ad - Adjustable and have rugged forged jaws shaped to fit the job. Two clamp bolts lock the jaws on the pitman arm ensuring a solid grip. This puller is designed for the toughest pitman arm jobs. For cars and light trucks with a maximum jaw spread is 2-1/8 inches. Includes an adapter for added versatility and both pullers cover a variety of pulling jobs.
BrandOTC #ad
ManufacturerOTC Tools #ad
Height4.8 Inches
Length6.4 Inches
Weight3 Pounds
Width2.6 Inches
Part Number7311A
WarrantyLimited lifetime warranty

4. Lisle


Lisle 41970 Heavy Duty Pitman Arm Puller for Ford

Lisle #ad - Position puller jaws unmder the Pitman arm, turn center screw to remove. For 2005 and later ford F250 and F350 . A heavy-duty puller for the large Pitman arms on Ford 250 and 350 trucks. Jaws are forged and heat-treated for strength.
BrandLisle #ad
ManufacturerLisle #ad
Height1.5 Inches
Length10.5 Inches
Weight2.85 Pounds
Width5.75 Inches
Part Number41970
WarrantyLifetime Warranty - does not cover abuse or misuse

5. OTC


OTC 7314A Pitman Arm Puller

OTC #ad - Fast and effective. Made specifically for pulling steering pitman arms. No adjustments or screws to retain puller, this special puller can remove the most stubborn or frozen pitman arms. Forged steel jaws.
BrandOTC #ad
ManufacturerOTC #ad
Height9.9 Inches
Length6 Inches
Weight2.6 Pounds
Width1.4 Inches
Part Number7314A
WarrantyLimited lifetime warranty

6. Orion Motor Tech


Splitter Removal Kit RD06, Orion Motor Tech 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service

Orion Motor Tech #ad - Never miss out on a job or project from a misplaced tool. All in one front end service kit: containing 5 adjustable tools for a wide range of domestic and import vehicles. Orion motor tech promise: if any issues from our tools arise please don’t hesitate to contact us.

Hardened alloy construction: extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. Professional portable abs case: the custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Comes with 1x ball joint separator, 1x pitman arm and tie rod end puller, 1x Pitman Arm Puller, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x well-organized ABS case. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.

Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise. Universally compatible with a wide range of vehicles: The versatile design allows this tool to be used as a pitman arm remover, domestic rear-wheel-drive vehicles, import vehicles, or tie rod end puller for many small, ball joint separator, and light trucks. Conveniently keeps all your tools in one organized and secure place. We guarantee the quality of our tools and want to ensure you’re only getting the best.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height12.2 Inches
Length15.35 Inches
Width3.15 Inches
Part NumberPAP0006RD GWCA

7. Tiger Tool


Tiger Tool Intermediate Pitman Arm Puller 10388

Tiger Tool #ad - High strength steel casting designed for high capacity pulling. Easily remove even the most stubborn pitman arms on intermediate trucks, school buses, and other vehicles with a nut release pitman arm. May be used with up to a 1/2″ impact wrench. Eliminates dangerous hammering and cutting torch methods. Made in Canada.
BrandTiger Tool #ad
ManufacturerTiger Tool #ad
Height5 Inches
Length6 Inches
Weight5 Pounds
Width4 Inches
Part Number10388



ARES 70841 | 1 5/16-inch 33mm Pitman Arm Puller | Drop Forged Construction Designed to Remove Pitman Arms from Domestic Cars and Light Trucks

ARES #ad - Get the set: we offer a full range of front end service tools. If you have any issues with your aRES Pitman Arm Puller, replacement, simply contact customer service for troubleshooting help, parts, or refund. If you have a pet, they are part of the family. Specifications: this tool has a 1 5/16-inch 33mm yoke opening and is designed to remove the Pitman arms from domestic cars and light trucks.

The yoke features drop forged construction and is heat treated for strength and durability, while the jaws are shaped to ensure a positive grip, which leaves your hands free for the pulling job. With your support, you realize they are more than a pet, we’re proud to help this great organization. The 3/8-inch drive square port in the center screw allows for the tool to be used with a 3/8-inch drive ratchet.

The complete set can be found under ARES 70840 Design considerations: our 1 5/16-inch 33mm pitman arm puller is designed to handle the toughest Pitman arm pulling jobs on passenger cars and light trucks. We've got the tools that you'll need to get the job done now! Reliable | effective | efficient: users trust ares to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. Aspca business ambassador: we are proud to be part of the aspca business Ambassador Program.
BrandARES #ad
ManufacturerARES #ad
Part Number70841