Top 7 Smittybilt XRC Rear Bumper JK – Automotive Bumpers

As an Amazon Associate I earn from qualifying purchases.

1. Smittybilt

#ad

Smittybilt 76856 XRC Black Textured Rear Bumper with Hitch and Tire Carrier for Jeep Wrangler/Wrangler Unlimited

#ad
Smittybilt #ad - 2 and 4-door models. 5-year limited warranty. Features pressed tapered 2” diameter bearings, reinforced double sided gussets. Fits 2007 to 2016 jk wrangler, Rubicon and Unlimited. 1-1/4” grade 5 mounting hardware. Manufactured from 3/16” cold rolled steel and then robotically welded to the exact specifications. Black powder coat.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height28 Inches
Length66 Inches
Weight173 Pounds
Width17 Inches
Part Number76856
Model76856
Warranty5-Year limited

2. Smittybilt

#ad

Smittybilt 76855 XRC Textured Black Rear Bumper with 2" Receiver Hitch and D-Ring Mounts

#ad
Smittybilt #ad - Features a 2-inch class iii tow rated receiver hitch and two D-ring mounts D-rings not included. 2 and 4-door models. Made from 3/16 cold rolled steel and then robotically welded to the exact specifications. Two stage matte Black powder coat finish. Do not use any type of cleaners that contain abrasives that may damage the finish of your part.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height20 Inches
Length69 Inches
Weight107 Pounds
Width14 Inches
Part Number76855
Model76855
WarrantyLimited WarrantiesSmittybilt products are covered under the following limited warranties only. Note that the duration of the limited warranty differs according to the material and finish of the product purchased. Subject to the duration and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that its products are free from defects in material and workmanship. All other warranties and representations express or implied are hereby disclaimed, including fitness for merchantability and buyer's intended use or purpose. All parts are sold “AS IS” except for the limited warranties granted herein. Buyer assumes all risks as to the selection, suitability and performance of all goods and products selected. This limited warranty does not cover damage or impairment in any part due to misuse, improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. 1. Limited Lifetime Warranty on Stainless Steel Products - Smittybilt stainless steel products carry the foregoing limited repair or replacement warranty against workmanship and defects in the material so long as the original purchaser retains the original stainless steel parts. 2. Limited Five (5) Year / 50,000 Mile Pro-Rata Warranty (whichever occurs first) on Dual-Stage Powder Coating Products - Smittybilt dual-stage powder coated products carry the foregoing limited repair or replacement warranty for a period of (5) years or 50,000 miles (whichever occurs first) from date of purchase against workmanship and defects in the material, provided that any claim submitted after (2.5) years from date of purchase shall, if accepted, be satisfied by Smittybilt offering customer a credit on the purchase of a replacement product equal to fifty percent (50%) of customer's initial purchase price. 3. Limited Three (3) Year / 36,000 Mile Pro-Rata Warranty (whichever occurs first) on Chrome Products

3. Smittybilt

#ad

Smittybilt 76653 XRC Textured Black Rear Bumper for Jeep Wrangler/Wrangler Unlimited

#ad
Smittybilt #ad - Class iii 2 inch receiver hitch included. Optional swing away tire carrier can be added at any time. Manufactured out of 3/16 inch thick cold rolled solid plate. E-coat undercoated, dual stage textured black matte powder coat. Solid d-ring mounts welded inside and out.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height16 Inches
Length68 Inches
Weight70 Pounds
Width12 Inches
Part Number76653
Model76653
Warranty5-Year limited

4. Smittybilt

#ad

Smittybilt 76858 XRC Gen 2 Rear Bumper for Jeep Wrangler

#ad
Smittybilt #ad - Single-handed opening operation Tuned to factory tailgate. Auxilliary back up light cutouts, LED lights included. Bottle opene. Jeep bumpers - fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited. Frame pivot point. Cb and jack mount. Hdpe slip strips the ultimate fender-to-fender protection for rock crawling. Class iii hitch Anti-rattle provision. Roto pax gas/water can mount. Bolt-on design tire carrier Fits SRC, XRC and Factory Tenth Anniversary.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height14 Inches
Length69 Inches
Weight107 Pounds
Width20 Inches
Part Number76858
Model76858
Warranty3 Years

5. Smittybilt

#ad

Smittybilt 76896-01 XRC Atlas Rear Bumper with Hitch

#ad
Smittybilt #ad - These are complete Line Of Heavy-Duty Shop Products. Through creativity, productivity And Innovation - This Brand Continues To Develop The Finest Automotive Accessories. These products on exceptionally High Order Fulfillment Rates, Breadth Of Available Products.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height11 Inches
Length74 Inches
Weight111 Pounds
Width20 Inches
Part Number76896-01
Model76896-01
WarrantyManufacturer Warranty

6. 7BLACKSMITHS

#ad

Rear Bumper Textured Black w/2" Hitch Receiver For 2007-2018 Jeep Wrangler JK

#ad
7BLACKSMITHS #ad - Built-in two 18W LED light for road lighting. Finished with a e-coat and a powder coat, it will never get rusted even the the coat off.

In additional, the rear bumper also include a 2" receiver hitch for towing. No cutting and no drilling. Direct bolt-on installation. As a direct fit replacement. The jk rear bumper fit with all 2007-2018 Jeep wrangler JK and JK unlimited models. Heavy duty 3/16 inches steel to keep the body of your Jeep protected from impacts in the harsh off-road environment. High strength d-ring mounts w/ d-rings included, the D-Ring mounts are welded both inside and outside for extra strength.
Brand7BLACKSMITHS #ad
Manufacturer7BLACKSMITHS #ad
Part NumberBL87
ModelBL87

7. Nilight

#ad

Nilight Rear Bumper Compatible for 2007-2018 Jeep Wrangler JK,Rock Crawler Bumper with Hitch Receiver & 2X Nilight Upgraded 40W LED Lights Off Road Textured Black,2 years Warranty

#ad
Nilight #ad - They brighten up the road, perfect for any night time adventure. Perfect for off-road use-  featuring 2x nilight upgraded led lights two high strength D-Ring mounts and a 2" standard receiver hitch this Nilight Rear Bumper is perfect for off-road use.

It also gives your vehicle an attractive upgrade in its appearance for added style. Heavy-duty rear protection- this bumper was designed to add protection to your precious Jeep’s lower rear end while providing it with superior towing capabilities with its heavy-duty D-rings. Easy, bolt-on installtion -this nilight mid width rear bumper is also designed with ease of use and installation in mind.

Best service - buy at nilight, you earn what you buy! we offer 2 Years Nilight and Lifetime Best Customer Service. If you have any questions or problems, please contact us. Thanks to its convenient bolt-on solution, this bumper installs quickly and easily without requiring any modification to your vehicle. Extremely bright- built-in 2pcs 18w nilight upgraded new design Flush Mount LED Pods.
BrandNilight #ad
ManufacturerNilight #ad
Part NumberJK-52A
ModelJK-52A
Warranty2 Years Warranty