Top 6 Emf Ball Joints – Automotive Replacement Suspension Ball Joints

As an Amazon Associate I earn from qualifying purchases.

1. MOOG

#ad

MOOG K500245 Ball Joint

#ad
MOOG #ad - Easy to install -- precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box. Absorbs impact -- belleville preload washer helps keep the bearing package tight as bearings wear.

Strong & durable - ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength. Greaseable socket -- reduces corrosion and wear by allowing new lubricant to flush contaminants. Problem solver gusher bearing -- metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life. Keeps dirt and water out -- pre-installed dust boot shields socket components from wear-causing contaminants. Comprehensive coverage -- available for foreign and domestic nameplates.
BrandMOOG #ad
ManufacturerMOOG #ad
Height2.75 Inches
Length5.25 Inches
Weight1.6 Pounds
Width3.31 Inches
Part NumberK500245
ModelK500245

2. A-Team Performance

#ad

A-Team Performance Super Greasable Duty 2 x K8607T Lower Ball Joints and 2 x K80026 Upper Ball Joints Compatible with XRF Ford Excursion 4X4 F250 F350 1999-2006

#ad
A-Team Performance #ad - Kit inclusions — greasable 2 x k8607t lower Ball Joints and 2 x K80026 Upper Ball Joints. A-team performance super duty upper and lower ball joints Compatible with XRF Ford Excursion 4x4 F250 F350 1999-2006. Compatible with 1999-2004 f450 and F550 Super Duty 4x4. One million miles warranty for XRF chassis parts. Compatible with 1999-2006 excursion f250 f350 super duty trucks 4x4, and F250 and F350 Super Duty RWD with Monobeam front axle only.
BrandA-Team Performance #ad
ManufacturerA-Team Performance #ad
Part NumberK80026 K8607T
ModelK80026 K8607T

3. Orion Motor Tech

#ad

Orion Motor Tech 21PCS Master Ball Joint Press | Upper and Lower Ball Joint Removal Tool | Automotive Mechanic Tool Set

#ad
Orion Motor Tech #ad - Universally compatible with a wide range of vehicles - use the orion motor tech ball joint press set ball joint tool / bushing removal tool with all the receiver tubes and removing/installing adapters needed to effortlessly remove press fit parts including ball joints, 44, vans and sport utility vehicles, and more on most GM, 30, 35, Ford, brake anchor pins, U-joints, and Dodge 2 and 4 wheel drive pickups, Chevy, will service perfect for vehicles having the Dana 28, 60 axle.

Package include: 9x adapters, 1x Removal Adapter, 1x Install Adapter, 1x Screw, 1x Sleeve. Constructed from heavy-duty forged solid carbon steel with anti-rust black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion. Professional grade quality and durability - off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Conveniently organized in custom molded case - ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty ABS plastic blow-molded carrying case with handle for easy storage, 3x Receiving Tube, 1x C-Frame, 1x Install Cup Adapter, 1x Center Rod, safe storage, 1x Receiving Cup, 1x Install Cup, and quick organization.

If you are not satisfied with this product or if you have any question, please feel free to let us know. Orion motor tech - we pursue outstanding quality and professional technical support. Essential tool for ball joint service - use the orion motor tech 22pcs ball joint press set ball joint tool / Bushing Removal Tool with multi-size adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height19.69 Inches
Length24.02 Inches
Width4.72 Inches
Part NumberBJS 002100 GWCA

4. DLZ

#ad

Ford F-450 F-550 Super Duty 1999-2002, Ford F-250 F-350 Super Duty 4WD 1999-2004, DLZ 6 Pcs Front Suspension Kit-Lower Upper Ball Joint Outer Tie Rod End Compatible with Ford Excursion 4WD 2000-2005

#ad
DLZ #ad - Important notice: before placing the order, please check your car model in the Fitment Filter System in the top left corner. Interchange part number: f81a3b406ba, es80799, es80799, k8388t, 4796453, k8607note:dodge 2500 models with a 4500 or 4850 lb dana 60 axle only!!!, f3tz3049a, 1c3z3050ba, f6tz3050ha, 4746813, f2tz3050a, k8607t, 5c3z3050ab; bc3z3050B, f81z3304ba, f81a3b406BA, k80026note: dodge 2500 models with a 4500 lb axle only, es3427t, k8388, ES3423, F81Z3A131BB.

Quality & delivery warranty: 1 Year Warranty for all parts you ordered. Please make sure to match the exact part numbers between this part and the part that you are replacing.

Package includes: both 2 front lower + both 2 Front Upper Ball Joints, Both 2 Front Outer Tie Rod Ends. Compatibility information provided is for reference only. Only compatible with: 2000 2001 2002 2003 2004 2005 ford excursion 4wd 1999 2000 2001 2002 2003 2004 ford f-250 super duty 4wd 1999 2000 2001 2002 2003 2004 ford f-350 super duty 4wd 1999 2000 2001 2002 ford f-450 super duty 1999 2000 2001 2002 ford f-550 SUPER DUTY.
BrandDLZ #ad
ManufacturerPartsgoing #ad
Part NumberGPCM-0150247196

5. Detroit Axle

#ad

Detroit Axle, 10pc Suspension Kit, 2WD Front Ball Joint Sway Bar Tierod Replacement for Ford F-250 F-350 SD Excursion

#ad
Detroit Axle #ad - 2wd model with twin I-Beam Axle Only. Manufactured in ISO9002 Certified facility. Detroit axle brand - highest Quality - Built to meet OEM Specifics. Fits driver & Passenger Side.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height7 Inches
Length55 Inches
Weight35 Pounds
Width7 Inches
Part Number80052-10B-DA

6. Detroit Axle

#ad

4WD Upper and Lower Ball Joint Replacement for Ford F-250 F-350 Excursion, Dodge Ram 2500 3500 DANA 60 Axle, Detroit Axle, 4pc Set

#ad
Detroit Axle #ad - 4x4 models Only. Detroit axle brand - highest Quality - Built to meet OEM Specifics. For - 1994-1999 dodge ram 2500 4x4 w/dana 60 axle only - 1994-1999 dodge Ram 3500 4x4 w/ Dana 60 Axle Only. For - 2000-2005 ford excursion 4wd - 1999-2012 ford f-250 super-duty 4wd - 1992-1997 ford f-350 4wd - 1999-2012 Ford F-350 Super Duty 4WD.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height7 Inches
Length7 Inches
Weight7 Pounds
Width7 Inches
Part Number80052-4