Top 10 U Bolts for 98 Ford Ranger – Automobile Chassis Body & Suspension Lift Kits

As an Amazon Associate I earn from qualifying purchases.

1. Supreme Suspensions


2012 Ford Ranger 1.5", 2" Rear Suspension Lift High-Strength Steel Add-A-Leaf Kit Short 21" + Round Bend U-Bolts 4WD, Supreme Suspensions, Rear Leveling Kit for 1997

Supreme Suspensions #ad - Contents: 2x high-strength steel leaf packs, Installation Hardware, 4x round Bend U-Bolts, 4x Vibration Isolator Pads, Installation Instructions and Pro Pack. Benefits: supreme suspensions add-a-leafs are constructed from heat-treated, minimize squat, tempered steel and can be added to your existing leaf spring packs to increase load and towing capacity, and allow for larger custom rims and tires.

An alignment is recommended after install. Technical notes: 1. 5-2 inch rear suspension lift, depending on the condition of your leaf packs. Installation: easy 'bolt-on' installation takes 1 to 2 hours.

The included u-bolts eliminate flexing of the leaf spring packs and provide the desired spring stiffness for your vehicle, maximizing safety and ensuring that you get the most out of your rear lift. Compatible with 1997 - 2011 ford Ranger 4WD. A leaf spring unloading/compressing tool is required for a safe installation. Only fits models with single-pin leaf packs.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Part NumberAZM L2_U9_Ranger4WD

2. MaxTrac


Maxtrac Suspension 910203L Body Lift Kit and Component U-Bolts For 1-3In Lift Blocks 10 3/4In X 2 7/8In

MaxTrac #ad - Package weight: 7. 0 pounds. Country of Origin : United States. Package dimensions: 2. 0 h x 17. 0 l x 6. 0 w inches. Fit type: Vehicle Specific.
BrandMaxTrac #ad
ManufacturerMaxtrac Suspension #ad
Height2 Inches
Length17 Inches
Weight7 Pounds
Width6 Inches
Part Number910203L

3. McBay Performance


2" Rear Block & U-Bolt Lift Kit for 1998-2012 Ford Ranger & Mazda B-Series 2WD Trucks

McBay Performance #ad - Precise steel blocks, Blocks are Tapered for Drive-Shaft Angle. Kit includes: 2 blocks, 4 u-bolts, 8 Hardened Washers 8 Nuts & Instructions. 100% made in the usa! Fits: ford: 1998-2012 ranger 2wd all cabs, 1998-2001 b2500 2wd all cabs, 1998-2008 b3000 2wd all cabs, mazda: 2001-2010 b2300 2wd all cabs, 1998-2010 B4000 2WD All Cabs.
BrandMcBay Performance #ad
ManufacturerMcBay Performance, Inc. #ad
Weight16 Pounds
Part NumberMP-F2001
WarrantyAll lift / lowering products are sold with a Lifetime Warranty against manufacturers defects. Only applicable to the original purchaser.



Black, GOOACC GRC-70 35PCS Engine Under Cover Splash Shield Guard Body Bolts Bumper Fender Liner Push Retainer Fastener Rivet Clips

GOOACC #ad - Package includes 10pcs extruded u-nuts - replace/fix to the bumpercorrosion resistant 15pcs Body Bolts with Built-in Fender Washer CORROSION RESISTANT 10pcs Plastic Push Clips as pictured.

The clips are widely used for radiator yoke trim panel door trim door panel bumper car fender flare side skirt grille wheel well air intake engine cover mud flap and splash guard shield retainers rivet clips replacement. Brand new engine splash shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment. The extruded u-nuts can be used to replace/fix to the bumper. Fits infiniti g35 g37 fx35 fx45 ex35 nissan 370Z 350Z see details.
BrandGOOACC #ad
ManufacturerGOOACC #ad
Part NumberGRC-70
Warranty2 Years Warranty

5. Motive Gear


Motive Gear MGUB1310 Differential U-Bolt Kit

Motive Gear #ad - Part number: MGUB1310 Motive Gear. Package dimensions: 12. 46 l x 2. 92 h x 6. 04 w inches. Package weight: 1. 2 pounds.
BrandMotive Gear #ad
ManufacturerMotive Gear #ad
Height5.5 Inches
Length6 Inches
Width6 Inches
Part NumberMGUB1310



Bumper Clips Extruded U-Nuts Kit Fit for Nissan 350z 370z Infiniti G35 G37 FX35 FX45, Bumper Fender Liner Push Retainer Fastener Rivet Clips, 35 PCS Engine Under Cover Splash Shield Guard Body Bolts

DWARFOO #ad - Quality material: metal rivet clips are not breakable and bumper clips are made of sturdy nylon. Package includes: 10 extruded u-nuts - replace/secure to bumper corrosion resistant15 body bolts with built-in fender washers corrosion resistant 10 nylon push clips.

It is a new kind of hardware fittings for bumper splash plate bolt. About us: we are committed to providing car owners with high quality, convenient and useful auto parts, which is the direction we have been working hard to make customers satisfied is our goal. Compatibility: for infiniti g35 g37 fx35 fx45 ex35 nissan 370z 350Z, direct replacement and perfect accessories, engine splash shield bolt hardware kit block bumper clamp rivets, easy to install and use. Widely used: splash guard bolt under hood for replacement of trim clamps, bumper clamps, door trim clamps, bonnet and splash guard retainers.
BrandDWARFOO #ad
ManufacturerDWARFOO #ad
Height0.35 Inches
Length1.18 Inches
Weight0.36 Pounds
Width0.35 Inches
Part Numberqp5030

7. Dorman


Dorman 81004 U-Joint Bolt Kit Compatible with Select Ford / Mercury Models

Dorman #ad - Direct replacement - this universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles.

Durable construction - this kit is made from quality components to ensure reliable performance and a long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool. Ideal solution - this kit is a reliable replacement for original components that are missing or have failed due to fatigue.
BrandDorman #ad
ManufacturerDorman Products #ad
Height0.75 Inches
Length5.5 Inches
Weight0.75 Pounds
Width3.47 Inches
Part Number81004
WarrantyLimited Lifetime Warranty

8. Tallew


BMW 61128373946, Tallew 8 Pcs Battery Terminal Bolt Kit Replacement Battery Terminal T Bolt Battery Terminal Nuts Car Battery Cable Extender T Bolt Compatible with 64740 GM 19116852, VW 6x0-915-138

Tallew #ad - Sturdy for long time use: made of quality stainless steel material, not easy to break, the t bolt is compact and stable in structure, with fine manufacturing process, to ensure reliable performance and long service life, deform or rust, providing you with a pleasant experience.

Ideal replacement parts: the battery terminal t bolt is an ideal replacement for original equipment, brand and model, matching the fit and function of most factory parts of specified year, you can use it with confidence. Range of applications: these car battery bolts are compatible with 64740 gm 19116852, VW 6X0-915-138 and BMW 61128373946; They are reliable replacements for an original part which is missing or has failed due to long time use.

Enough to meet your needs: the package contains 8 pieces of battery terminal t bolt kit, including 8 pieces of bolts, 8 pieces of nuts and 8 pieces of washers, sufficient in quantity to meet your daily use and replacement demands. Easy to install: the battery terminal bolt is simple to install, just takes a few seconds to install, you just need to install it manually at the target location, no tools or instructions are required, saving you time and energy.
BrandTallew #ad
ManufacturerTallew #ad
Part NumberTallew- Battery Terminal -097
ModelTallew- Battery Terminal -097

9. MaxTrac


Maxtrac Suspension 910203L 1"-3" Lift Block U-Bolt for Ford Ranger

MaxTrac #ad - Shipping weight:7 pounds, item model Number:910203L, model:910203l, Brand:MaxTrac. International shipping:this item is not eligible for internatio, Product Dimensions:17 x 6 x 2 inches, Cover Included:Automotive Suspension Lift Kits. Domestic shipping:this item is available for shipping in t, Item Weight:7 pounds, Manufacturer Part Number:910203L, Mpn:910203L.
BrandMaxTrac #ad
ManufacturerMaxtrac Suspension #ad
Height2 Inches
Length17 Inches
Weight7 pounds
Width6 Inches
Part Number910203L

10. GMB


260-0153 Universal Joint Strap Kit

GMB #ad - Includes all required hardware for installation. Strap kits used for installing the universal joint. Same fit as the original equipment.
BrandGMB #ad
ManufacturerGMB #ad
Height1.3 Inches
Length3.5 Inches
Width3.5 Inches
Part Number260-0153
WarrantyParts Only