Top 10 Tongue Jack Block – RV Jacks & Stabilizers

As an Amazon Associate I earn from qualifying purchases.

1. Dock N Stow

#ad

RV Camper, Dock N Stow Trailer Jack Stand, Boat, Utility Travel Accessories, Secures with a Bungee, Stabilizing Leveling Block Stores on Tongue Frame, GEN 1, Fits Most Jack Foot Plates, Wheel, Pop Up

#ad
Dock N Stow #ad - Multi-use: dock n stow gen 1 supports most any trailer tongue jack without damaging the trailer. It has a 5000 lb. With the 1/4 inch lip around the top, add another Dock N Stow on top for 12 inches of height. If dock n stow does get dirty, engineered and made for the outdoors using high quality ABS plastic which is resistant to UV exposure, heat, wipe it clean in seconds.

Not to be used with C channel or I-beam frames. Added height: dock n stow provides 6 inches of height saving you time trailering or de-trailering, they are stackable, no need to lower your jack to the ground. Durable: gen 1 is extremely durable, water, mud and most other environmental hazards. Space-saver: gen 1 sits directly on 2, 2. 5 or 3-inch trailer tongue or frame with the included dovetail spacers.

No more climbing up into the truck looking for your block of wood, risking injury. Wheel dock capacity. Stored close to the area of use, you’ll never have to search for a stand again and you'll have more storage space to bring what you need. Capacity for any foot or post, round or square and a 2500 lb. For rv's, boating and Most Bumper Pulled Trailers. Safety: gen 1 secures to square or rectangle tube frames with an included adjustable flat bungee & anti-slip silicone tape.
BrandDock N Stow #ad
ManufacturerDock N Stow #ad
Height6.25 Inches
Length7 Inches
Weight3.36 Pounds
Width7 Inches
Part NumberGEN1
WarrantyDock N Stow products are covered by a one-year limited warranty on material and workmanship. Warranty is non-transferable. Dock N Stow reserves the right to inspect all product claims under warranty. Any alteration of the device voids this warranty. The user assumes all risks for the proper use of this device and for ensuring product suitability for the intended application. This warranty shall not cover any incidental or consequential damages due to the improper use or failure of this device.

2. Dock N Stow

#ad

Pop Up, and Wheels, Utility Travel Accessories, Fits Most Jack Foot Plates, Stabilizing Leveling Block Stores on Tongue Frame, Dock N Stow Trailer Jack Stand, RV Camper, Boat, Secures w/a Magnet GEN 2

#ad
Dock N Stow #ad - Durable: gen 2 has durability built into it, engineered and made for the outdoors using high quality ABS plastic, heat, mud and most other environmental hazards. Added height: dock n stow provides 6 inches of height saving you time trailering or de-trailering, they are stackable, no need to lower your jack to the ground.

Wheel dock capacity. If dock n stow gets dirty, it's resistant to UV exposure, water, wipe it clean in seconds. Space-saver: gen 2 sits directly on 2, 2. 5 or 3-inch trailer tongue or frame with the included dovetail spacers. Drive with it safely attached to your trailer. Safety: gen 2 secures to steel square, rectangle tube, i beam and channel trailer frames with a powerful on/off switchable magnet.

For rv's, boating and Most Bumper Pulled Trailers. Stored close to the area of use, you’ll never have to search for a stand again and you'll have more storage space to bring what you need. Capacity for any foot or post, round or square and a 2500 lb. No more climbing up into the truck for your block of wood, risking injury. Multi-use: dock n stow gen 2 supports most any trailer tongue jack without damaging the trailer. It has a 5000 lb.
BrandDock N Stow #ad
ManufacturerDock N Stow #ad
Height6.25 Inches
Length7 Inches
Weight5.3 Pounds
Width7 Inches
Part NumberGEN2
WarrantyDock N Stow products are covered by a one-year limited warranty on material and workmanship. Warranty is non-transferable. Dock N Stow reserves the right to inspect all product claims under warranty. Any alteration of the device voids this warranty. The user assumes all risks for the proper use of this device and for ensuring product suitability for the intended application. This warranty shall not cover any incidental or consequential damages due to the improper use or failure of this device.

3. Camco

#ad

Stabilize Your Tongue, 5,000 lb. Rating, Evenly Distributes the Weight of the Tongue, Lightweight and Easy to Store, 44635, Camco Durable Tongue Jack Stand

#ad
Camco #ad - Evenly distributes the weight of the tongue. Eliminates the need for bulky blocks of wood or cinderblocks. Lightweight and easy to store. Weight rating. Durable, UV stabilized resin. 5, 000 lb.
BrandCamco #ad
ManufacturerCamco #ad
Height8 Inches
Length9 Inches
Weight1.15 Pounds
Width8 Inches
Part Number44635
Model44635

4. Lippert

#ad

Lippert 285318 3500LB Power Tongue Jack Black

#ad
Lippert #ad - Designed so trailer owners don't have to manually crank their traditional sidewinder jacks. Complete with all necessary hardware and pins, installation for the Power Tongue Jack is fast and simple, so you can get to lowering and raising your equipment in no time.

No cranking necessary. Lippert components power Tongue Jack raises and lowers your trailer with the click of a button. Saves time and energy. Powerfully designed. Easy installation. With a 3, this jack was constructed to do all the heavy lifting, 500-pound lift capacity and 30 AMPs of power, so you don’t have to. Designed with an enhanced rocker switch, you can automatically raise and lower your A-frame trailer with the simple push of a button -- saving you time and energy.

Equipped with 4 led lights that shine directly down on the coupler, you can operate the Power Tongue Jack night or day with ease. Increased tube diameter now gives our jack a 3, 500-pound rating. Black color matches most RV models. This jack was built with a tough, textured casing that protects it from getting chipped or scratched by damaging dirt and debris. Integrated lighting. Added protection.
BrandLippert #ad
ManufacturerLippert Components #ad
Height7.25 Inches
Length32.75 Inches
Weight10 Pounds
Width12.5 Inches
Part Number285318
Model285318
Warranty1 Year

5. Valterra

#ad

Red, Valterra A10-0900 Trailer Tongue Jack Stand

#ad
Valterra #ad - Holds up to 10, 000 lbs. Eliminates the need to tote and store bulky wood blocks and weighs only 2 lbs. Not designed to be used with trailer jacks with wheels or casters. Supports the trailer tongue without the worry of sinking into the asphalt on hot days. Measures 8-5/8" diameter x 8-3/8" high.
BrandValterra #ad
ManufacturerValterra #ad
Height1.39 Inches
Length1.39 Inches
Weight1.5 Pounds
Width1.39 Inches
Part NumberA10-0900
ModelA10-0900
Warranty1 year

6. yosager

#ad

Stabilizer Jacks, yosager 10 Pack Heavy Duty Leveling Blocks, Red, Ideal for Leveling Single and Dual Wheels, Hydraulic Jacks, Camper Levelers, Tongue Jacks

#ad
yosager #ad - Strong and durable construction these camper levelers blocks is made of high quality material for years of rugged use. Powerful functions modular designed levelers not only configure to fit any leveling function, but they also withstand tremendous weight, can also be used as a support base for other stabilizing equipment.

Each set comes in a zippered storage bag with handle for easy carrying. Solid bottom structure prevents them from sinking on soft ground. Easy to use simply set them into a pyramid shape to the required height that the RV needs to be raised and drive onto the stack.

10 interlocking leveling blocks stack to the desired height for customizable leveling, each block adds a full inch to stack height, Each leveling block: 8. 27 inch x 8. 27 inch x 1 inch. Wildly use uneoa leveling block can be used with single wheels, tongue jacks, 5th wheel jacks, tandem wheels, double wheels, hydraulic jacks and stabilizer jacks.
Brandyosager #ad
Manufactureryosager #ad
Height1 Inches
Length8.27 Inches
Width8.27 Inches
Part NumberCLD

7. Wind Zone

#ad

Wind Zone Andersen Hitches Trailer Jack Block RV Accessories Large Blocks with Magnets Pack of 2 3608-M-2

#ad
Wind Zone #ad - Extremely strong and durable powerful built-in magnets for easy set up! Resists dirt, 000 lbs single block and 1, grime and oil Rated at 6, 500 lbs double-stack 100% Made in the USA. Top 14" tall when double-stacked recessed pad area is 9-1/8" diameter, recessed post-hole is 2-1/2" diameter Each block weighs 5. 3 lbs. Base, 10" dia. Dimensions: 8" tall, 12" dia. Less stress on your rv or trailer Eliminates nearly all movement and sway in parked RV's and Trailers.
BrandWind Zone #ad
ManufacturerAndersen Hitches3 #ad
Height4.75 Inches
Length3.75 Inches
Width3.75 Inches
Part Number3608-M-2

8. Andersen Hitches

#ad

1 Pack, Andersen Hitches EZ-Block Rectangle Jack Block Works with Scissor Jacks, Post Jacks, Red 3621, Pad Jacks

#ad
Andersen Hitches #ad - The blocks feature a recessed post hole that helps prevent post jacks from slipping. Recessed post-hole is 2-1/2" diameter and each block weighs 3.

1 lbs! fit type: Universal Fit. The andersen ez block is an extremely strong and durable jack block that is perfect for all bumper-tow trailers. It works with scissor jacks, post jacks, pad jacks, and more. Dimensions: 12" x 8. 5" base, 8" x 4. 5" pad rest, 8" tall 14" tall when double-stacked. Rated at 2, 000 lbs single or double stacked. The blocks are also stackable if you need extra height Note: do not stack more than two high. Finger holes on each side for easy moving. The ez block is designed to resist dirt and oil.
BrandAndersen Hitches #ad
ManufacturerAndersen Hitches #ad
Height1 Inches
Length1 Inches
Width1 Inches
Part Number3621
Model3621

9. Open Road Brands

#ad

2 Packs 2000 pounds. Boat Trailer Jack, Open Road Brands Weld-on Pipe-Mounted rotatable Trailer Jack, Stainless Steel Jack

#ad
Open Road Brands #ad - Installationthis trailer tongue jack is designed to mount Onto The Trailer Frame With a Weld-On Installation. It comes with a raw Steel Pipe Bracket For Ready Welding. The integrated grip allows for Easy Raising And Lowering Of The Trailer Coupler As Needed.

Capacitythis trailer jack is Rated To Support Up To 2, 000 Lbs. Products sizethis trailer tongue jack allows for 15 inches of vertical movement and operates using a Side-Wind Handle 14-25/32 Inch Retracted Height, 22-3/8 Inch Extended Height. The jack swings up and out of the way for towing and Features a Pull Pin To Securely Lock Into Place In The Vertical Or Horizontal Position.

Finishfor long-lasting corrosion resistance against water, Dirt, Road Salt And More, This Trailer Jack Is Protected In a Durable Black Powder Coat And Zinc-Plated Finish. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped With a Swivel Bracket.
BrandOpen Road Brands #ad
ManufacturerOPENROAD #ad
Part NumberTJ-004-2000-2

10. Dock N Stow

#ad

Stabilizer Leveling Block Store on Tongue Frame, RV Camper, Set Includes Wheel Chocks & Lock, Dock N Stow Trailer Jack Stand, Fits Most Jacks, GEN 1B, Boat, Pop Up Travel Accessories, Secure w/Bungee

#ad
Dock N Stow #ad - Not to be used on C channel or I-beam frames. With the 1/4 inch lip around the top, they are stackable, add another Dock N Stow on top for 12 inches of height. A recessed neodymium magnet on bottom of chock prevents sliding on frame.

Stored close to the area of use, you’ll never have to search for a stand or chocks again and you'll have more storage space to bring what you need. Added height: dock n stow provides 6 inches of height saving you time trailering or de-trailering, no need to lower your jack to the ground. Capacity for any foot or post, boating, round or square plates and a 2500 lb. Multi-use: dock n stow gen 1 bundle supports most any trailer tongue jack.

Drive with it safely attached to your trailer and only move it when you need to use it. A combo lock is included to prevent theft. Wheel dock capacity. It has a 5000 lb. Each measure 7 inches in length and accommodate most trailer wheels. For rv's, utility, cargo, and most bumper pulled trailers. Space-saver: fit it directly on 2, 2. 5 or 3-inch trailer tongue frames with the included dovetail spacers.
BrandDock N Stow #ad
ManufacturerDock N Stow #ad
Height6.25 Inches
Length21 Inches
Weight4.12 Pounds
Width7 Inches
Part NumberGEN1B
WarrantyDock N Stow products are covered by a one-year limited warranty on material and workmanship. Warranty is non-transferable. Dock N Stow reserves the right to inspect all product claims under warranty. Any alteration of the device voids this warranty. The user assumes all risks for the proper use of this device and for ensuring product suitability for the intended application. This warranty shall not cover any incidental or consequential damages due to the improper use or failure of this device.