Top 10 Nilight Mounting Brackets – Automotive Light Bars

As an Amazon Associate I earn from qualifying purchases.

1. Nilight

#ad

Nilight 2PCS Mounting Base Bracket LED Light Bar Slide Mount Bracket 2 years Warranty 90034B

#ad
Nilight #ad - Fitment: apply to most slide mounted led light bars: 18w, 36w, 252w, 72W, 198W, 108W, 234w, 162W, 126W, etc. The sturdy bracket can firmly fix the light bar.

Sliding black block: no need drilling, if there is a mounting hole before, the sliding block can slide left and right to fit the existing holes. Fit type: Universal Fit. High quality: it is made of strong and lightweight aluminum alloy material. Adjustable bracket:the pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier. Easy to use: works with led light bar, car top racks, grille guard, side mount screws and bolts, directly mount onto your bull bar, etc. Quakeproof when passing through rugged terrain.
BrandNilight #ad
ManufacturerNilight #ad
Part Number90034B
Model90034B
Warranty2 years Warranty

2. Nilight

#ad

Nilight 2 Pack Mounting Bracket Kit LED Off Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty

#ad
Nilight #ad - Package includes: 2Pcs LED light bar mounting bracket. Sturdy bracket: strong aluminium alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving. Wide application: can be used on tubes of 1", 1-1/2", 1-3/4" & 2" In diameter and applied to LED light bar for almost all kinds of vehicle. Easy installation: pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation. Useful rubber: high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface.
BrandNilight #ad
ManufacturerNilight #ad
Height2 Inches
Length3 Inches
Weight0.9 Pounds
Width3 Inches
Part Number90020B
Model90020B
Warranty2 years Warranty

3. Nilight

#ad

90021D 4PCS Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty, Nilight

#ad
Nilight #ad - Sturdy bracket: strong aluminum alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving.

Wide application: can be used on tubes of 1"", 1-1/2"", 1-3/4"" & 2"" in diameter and applied to led light bar for almost all kinds of vehicle. Package includes: 4 PCs led light bar mounting bracket. Fit type: Universal Fit. Easy installation: pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation. Useful rubber: high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface.
BrandNilight #ad
ManufacturerNilight #ad
Part Number90021D
Model90021D
Warranty2 Years Warranty

4. Nilight

#ad

Nilight Led Light Bar Mounting Bracket Front License Plate Frame Bracket License Plate Mounting Bracket Holder for Off-Road Lights LED Work Lamps Lighting Bars,2 Years Warranty

#ad
Nilight #ad - Work with most off road auxiliary lights, 4x4, Jeep, Pickup, truck, SUV, LED work Lamp and LED light bars. Easy installation: no drill, no modification required, just like replace a license plate using its mount location, usually can be installed in 20 minutes.

Mounting position: 4 different locations/methods to install the off-road lights. Universal fitment: fits for almost all car, driving lights, fog lights, etc. On the bull bar, 2 sets of mounting holes on top and 1 set in front. Heavy-duty bracket: high-quality aluminum alloy material and Advanced production process, the mounting bracket is impact resistant and anti-corrosion. Package include: 1Pc front license plate mounting bracket.
BrandNilight #ad
ManufacturerNilight #ad
Height4 Inches
Length20 Inches
Weight1 Pounds
Width3 Inches
Part Number90021B
Model90021B
Warranty2 Years Warranty

5. Nilight

#ad

Led Light Bar Mounting Brackets,Nilight 2pcs Universal Hood Led Work Light Bar Mount Bracket Clamp Holder for Jeep Truck Off Road Installed No Need Drilling, Type 2 NI90025B

#ad
Nilight #ad - Anti-slip surface: the surface contacting with the front cover of the car covers a multi-layer non-slip composite material and loss prevention materials to ensure that the contact surface of the bracket will not damage the car surface paint. Stable & durable: five Screws are enough to tight the light with the car cover tightly. Universal: it can be used to install almost all LED Light Pods. Easy to install. No any damage to the car surface paint. Made of 304 stainless steel, can ensure absolute anti-rust, the surface covered with rubber anti-rust paint, anti-corrosion.
BrandNilight #ad
ManufacturerNilight #ad
Weight0.22 Pounds
Part NumberNI90025B
ModelNI90025B
Warranty2 Years Warranty

6. Nilight

#ad

2 Years Warranty, LED Light Bar Mounting Bracket, Nilight 2PCS Universal Adjustable Pillar Hood Led Work Light Mount Bracket Clamp Holder for Off Road Jeep Truck SUV Installing Without Drilling

#ad
Nilight #ad - No drilling &anti-slip design: no drilling is required, just clamp the kit and tighten up. High compatibility: can used to mount different thickness of work lights, fog lights, driving lights etc.

Free adjustability: you’re able to freely adjust 180°up and down and 60°left and right to make sure your light is at the exact lighting direction and at a perfect lighting angle. Package include: 2 x 304 stainless steel brackets Lamp is not included. 2 x hex Allen wrench. As only the max limit of the clamp board thickness on the vehicle is within 8mm. The clamp kit comes with anti-slip teeth and rubber pad to make sure a firm installation and no scratches left on the surface of the hood. Durable material: made of sturdy 304 stainless steel, protecting itself well from corrosion and rust in bad weather.
BrandNilight #ad
ManufacturerNiligh #ad
Height1.57 Inches
Length4.33 Inches
Weight0.46 Pounds
Width1.97 Inches
Part Number90043B
Model90043B
Warranty2 Years Warranty

7. Nilight

#ad

Nilight 90023B 2-Pack Standard Mounting Bracket Kit LED Off-Road Light Vertical Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty

#ad
Nilight #ad - Fit type: Universal Fit. Wide application: can be used on tubes of 1", 1-1/2", 1-3/4" & 2" in diameter and applied to LED light bar for almost all kinds of vehicle.

Comes fully-loaded- includes everything you need to start vertically mounting your favorite LED light bars to your ride, including an Allen hex key. Easy installation: you can simply install the LED lights with 10mm mounting screws onto your roof rack, bull bar or head rack without drilling any holes in the bodywork. Cast aluminum construction-strong aluminum alloy, fix the light on tube firmly, our clamps are strong & built to last. Rubber inserts dampen & protect- the bar clamp mounting kit comes with non-slip rubber inserts with a wider range of sizes; help dampen vibrations and protect your bull bar from being scraped.
BrandNilight #ad
ManufacturerNilight #ad
Height4 Inches
Length4 Inches
Weight0.5 Pounds
Width1 Inches
Part Number90023B
Model90023B
Warranty2 Years Warranty

8. Nilight

#ad

2 years Warranty, Model: 90035B, Nilight 2PCS Base Mounting Brackets Universal Slide Bracket Kits for LED Light Bar

#ad
Nilight #ad - Easy to install: mounting the brackets on your LED light and tighten anti-loose screws, need not worry about fall down and shaking. Allow you to change the direction of light beam, lighting every corner.

High quality: premium die-cast aluminum alloy material protect the base mounting brackets from rust and corrosion, passed physically tested ensures many years lifespan. Also can be free slide in the back of LED light. Fit type: Universal Fit. Wide application: fit for 4 inch to 54 inch led pods and led light bars, truck, Off Road. Package included: 2pcs base mounting brackets, screws, bolts and mounting tools. Jeep, suitable for most kinds of car, farming, 4WD, SUV, UTV, ATV, Tractor and so on. Adjustable bracket: the max adjustable angle of the mounting bracket was 45 degree.
BrandNilight #ad
ManufacturerNiligh #ad
Part Number90035B
Model90035B
Warranty2 years Warranty

9. Nilight

#ad

Nilight, 90026B 2PCS Jeep JK A-Pillar Windshield Hinge Mounting Brackets for Offroad LED Fog Light Halogen Work Light for 2007-2017 Jeep Wrangler JK,2 years Warranty

#ad
Nilight #ad - Ample room for mounting: length of the mounting plate of the bracket provides ample room for you to mount oversized lights, maximum thickness of the light can be 3.

Excellent protection: padded backplate between the contact area of the jeep and mounting bracket, preventing your jeep from being worn down. Free of drilling: no drilling required. Package include: 2 pieces jeep JK A-Pillar windshield mounting brackets. Mounting bolts are not included. Applicable vehicles: 2007-2017 jeep wrangler JK, the mounting plate contour will perfectly match that of the Jeep JK’s panel contour. Just find your jeep’s factory holes and stock bolts, and then mount the brackets on and lock. 7”. Also ensure a firmer mounting.
BrandNilight #ad
ManufacturerNilight #ad
Part Number90026B
Model90026B
Warranty2 Years Warranty

10. Nilight

#ad

Nilight 2PCS Side Pillar Mounting Brackets LED Metal Mounting Brackets For UTV Off Road 2014-2018 POLARIS RZR XP 1000 RZR 900, 2 Years Warranty 90045B

#ad
Nilight #ad - Fitments: 2014-2019 polaris rzr xp 1000; 2015-2019 polaris rzr 900 Long service life. High-quality material: side pillar Mounting Brackets made of high-quality metal, the surface is black powder coating, solid and waterproof.

Easy to install: pre-drilled holes, no modification or drilling required, the installation bracket ensures secure fixed on the LED light to your vehicle. Please check the fitment. Fit type: Universal Fit. Package includes: 2PCS Side Pillar Mounting Bracket. Wide compatible: it compatible with 12w/18w/20w/27w/45W/48W LED pod, can be used with most round or square LED lights.
BrandNilight #ad
ManufacturerNilight #ad
Part Number90045B
Model90045B
Warranty2 Years Warranty