As an Amazon Associate I earn from qualifying purchases.
Nilight #ad - High compatibility: can used to mount different thickness of work lights, fog lights, driving lights etc. No drilling &anti-slip design: no drilling is required, just clamp the kit and tighten up.
Durable material: made of sturdy 304 stainless steel, protecting itself well from corrosion and rust in bad weather. Package include: 2 x 304 stainless steel brackets Lamp is not included. 2 x hex Allen wrench.
iJDMTOY #ad - Good for most led light bar brands such as iJDMTOY Off-Road, Auxbeam, Rough Country, Rigid Industries, Nilight, etc. Unlike most other brackets on the market come with smaller m6 holes, our bracket's holes are all M8 5/16", so they are good for more varieties of LED light bars ranging from M6 1/4" to M8 5/16" screws.
Nilight #ad - For detailed mounting tips, just do flattest, please the 7th picture on the left. Multiple mounting functions: you can use a single magnetic base separately to mount small led work light, or use two or three together to mount a longer bottom-mounted LED light bar.
Package include: 2 x magnetic mounting base. Anti-scratch: the magnetic bases are coated with rubber cover to protect from scratching the hood and add on a secure installation.
Nilight #ad - Package include: 2 x magnetic mounting brackets with sucker base. For the “l” shape bracket, or remove “L” shape bracket, you can also choose to mount them inward or outward. Fit type: Universal Fit. Once matching well with the flat surface, it is strongly held, no falls down even on emergency braking or driving on the rugged mountain road.
All works well and still remain ample room to adjust the mounting angle of the light.
Strong hold: each magnetic base comes with 12 pcS magnets. For detailed mounting tips, mount the light on the bracket, just do flattest, please check the 9th picture on the left. Easier mounting: no drilling needed, and then mount the whole kit on the mounting position.
Nilight #ad - Stable & durable: five Screws are enough to tight the light with the car cover tightly. Easy to install. No any damage to the car surface paint. Made of 304 stainless steel, can ensure absolute anti-rust, the surface covered with rubber anti-rust paint, anti-corrosion.
Nilight #ad - Sliding black block: no need drilling, if there is a mounting hole before, the sliding block can slide left and right to fit the existing holes.
Adjustable bracket：the pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier. Fitment: apply to most slide mounted led light bars: 18w, 108W, 252W, 36W, 72w, 126W, 234W, 198W, 162w, etc.
Nilight #ad - Package included: 2pcs base mounting brackets, screws, bolts and mounting tools. Allow you to change the direction of light beam, lighting every corner. High quality: premium die-cast aluminum alloy material protect the base mounting brackets from rust and corrosion, passed physically tested ensures many years lifespan.
Also can be free slide in the back of LED light. Jeep, suv, utv, farming, 4wd, aTV, Tractor and so on.
Nilight #ad - Package include: 1Pc front license plate mounting bracket. Mounting position: 4 different locations/methods to install the off-road lights. On the bull bar, 2 sets of mounting holes on top and 1 set in front.
In some cases, you may be able to drill additional holes on the bracket to securely mount the bracket. Universal fitment: fits for almost all car, truck, fog lights, etc.
Note: there is a possibility that the bracket holder may block some vehicles' parking sensor. Work with most off road auxiliary lights, 4x4, Jeep, Pickup, SUV, driving lights, LED work Lamp and LED light bars.
Nilight #ad - Useful rubber: high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Wide application: can be used on tubes of 1"", 1-1/2"", 1-3/4"" & 2"" in diameter and applied to led light bar for almost all kinds of vehicle.
Sturdy bracket: strong aluminum alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving.
Nilight #ad - Useful rubber: high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Sturdy bracket: strong aluminium alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving.
Easy installation: pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation.
1. Nilight
#adNilight 2PCS Universal Adjustable Pillar Hood Led Work Light Mount Bracket Clamp Holder for Off Road Jeep Truck SUV Installing Without Drilling, LED Light Bar Mounting Bracket, 2 Years Warranty
#adDurable material: made of sturdy 304 stainless steel, protecting itself well from corrosion and rust in bad weather. Package include: 2 x 304 stainless steel brackets Lamp is not included. 2 x hex Allen wrench.
More information #ad
As only the max limit of the clamp board thickness on the vehicle is within 8mm. The clamp kit comes with anti-slip teeth and rubber pad to make sure a firm installation and no scratches left on the surface of the hood. Free adjustability: you’re able to freely adjust 180°up and down and 60°left and right to make sure your light is at the exact lighting direction and at a perfect lighting angle.| Brand | Nilight #ad |
| Manufacturer | Niligh #ad |
| Height | 1.57 Inches |
| Length | 4.33 Inches |
| Width | 1.97 Inches |
| Part Number | 90043B |
| Model | 90043B |
| Warranty | 2 Years Warranty |
More information #ad
2. iJDMTOY
#adIJDMTOY 2-Pack Universal Side Mounting Brackets Compatible with Straight or Curved LED Light Bar Most 20 30 40 42 50 52 Inches
#adMore information #ad
2-pack set of universal fit side mounting brackets come with screws, nuts, accessories to install these brackets. Compatible with most single-row led light bars on the market Good for both straight or curved LED light bar up to 51. 5" 250w. 360-degree rotation, allows you to adjust the angle freely.| Brand | iJDMTOY #ad |
| Manufacturer | iJDMTOY Auto Accessories #ad |
| Weight | 0.06 Pounds |
| Part Number | AA2213a |
| Model | Good for additional truck LED work light |
More information #ad
3. Nilight
#adPowerful Sucker Holder for Bottom-Mounted Offroad LED Work Light Mounting on Hood, Nilight 90042B 2PCS Magnetic Base LED Light Bar Mounting Brackets, 2 Years Warranty
#adPackage include: 2 x magnetic mounting base. Anti-scratch: the magnetic bases are coated with rubber cover to protect from scratching the hood and add on a secure installation.
More information #ad
Easier mounting: no drilling needed, mount the light on the bracket, and then mount the whole kit on the mounting position. Strong hold: each magnetic base comes with 12 PCS magnets. Once matching well with the flat surface, it is strongly held even on emergency braking or driving on the rugged mountain road.| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Height | 1.14 Inches |
| Length | 4.53 Inches |
| Width | 4.06 Inches |
| Part Number | 90042B |
| Model | 90042B |
| Warranty | 2 Years Warranty |
More information #ad
4. Nilight
#adPowerful Sucker Holder for Straight Curved Side-Mounted LED Light Bar Mounting on Hood Roof, 2 Years Warranty, Nilight 2PCS Magnetic Base LED Light Bar Mounting Brackets
#adAll works well and still remain ample room to adjust the mounting angle of the light.
More information #ad
Dual mounting functions & directions: can be used as a whole to mount side-mounted light, just use the magnetic base to mount bottom-mounted light. High compatibility: can be used on the hood or roof to mount any side-mounted light bars, single row, triple row, double row, straight or curved, or quad row. Strong hold: each magnetic base comes with 12 pcS magnets. For detailed mounting tips, mount the light on the bracket, just do flattest, please check the 9th picture on the left. Easier mounting: no drilling needed, and then mount the whole kit on the mounting position.
| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Height | 4 Inches |
| Length | 8 Inches |
| Width | 4 Inches |
| Part Number | 90041B |
| Model | 90041B |
| Warranty | 2 Years Warranty |
More information #ad
5. Nilight
#adNilight 90025B Led Light Bar Mounting Brackets 2pcs Universal Hood Led Work Light led Pods Mount Bracket Clamp Holder for SUV Truck Off Road Installed No Need Drilling, 2 Years Warranty
#adMore information #ad
Anti-slip surface: the surface contacting with the front cover of the car covers a multi-layer non-slip composite material and loss prevention materials to ensure that the contact surface of the bracket will not damage the car surface paint. Universal: it can be used to install almost all LED Light Pods.| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Height | 3 Inches |
| Length | 1 Inches |
| Width | 3 Inches |
| Part Number | 90025B |
| Model | 90025B |
| Warranty | 2 Years Warranty |
More information #ad
6. Nilight
#adNilight 2PCS Mounting Base Bracket LED Light Bar Slide Mount Bracket 2 Years Warranty 90034B
#adAdjustable bracket：the pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier. Fitment: apply to most slide mounted led light bars: 18w, 108W, 252W, 36W, 72w, 126W, 234W, 198W, 162w, etc.
More information #ad
Fit type: Universal Fit. High quality: it is made of strong and lightweight aluminum alloy material. The sturdy bracket can firmly fix the light bar. Easy to use: works with led light bar, grille guard, directly mount onto your bull bar, car top racks, side mount screws and bolts, etc. Quakeproof when passing through rugged terrain.| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Part Number | 90034B |
| Model | 90034B |
| Warranty | 2 years Warranty |
More information #ad
7. Nilight
#ad2 years Warranty, Nilight 2PCS Base Mounting Brackets Universal Slide Bracket Kits for LED Light Bar, Model: 90035B
#adAlso can be free slide in the back of LED light. Jeep, suv, utv, farming, 4wd, aTV, Tractor and so on.
More information #ad
Wide application: fit for 4 inch to 54 inch led pods and led light bars, Truck, suitable for most kinds of Car, Off Road. Adjustable bracket: the max adjustable angle of the mounting bracket was 45 degree. Fit type: Universal Fit. Easy to install: mounting the brackets on your LED light and tighten anti-loose screws, need not worry about fall down and shaking.| Brand | Nilight #ad |
| Manufacturer | Niligh #ad |
| Height | 0.5 Inches |
| Length | 6 Inches |
| Width | 4 Inches |
| Part Number | 90035B |
| Model | 90035B |
| Warranty | 2 years Warranty |
More information #ad
8. Nilight
#ad2 Years Warranty, Nilight, 90021B Led Light Bar Mounting Bracket Front License Plate Frame Bracket License Plate Mounting Bracket Holder for Off-Road Lights LED Work Lamps Lighting Bars
#adIn some cases, you may be able to drill additional holes on the bracket to securely mount the bracket. Universal fitment: fits for almost all car, truck, fog lights, etc.
More information #ad
Heavy-duty bracket: high-quality aluminum alloy material and Advanced production process, the mounting bracket is impact resistant and anti-corrosion. Easy installation: no drill, just like replace a license plate using its mount location, no modification required, usually can be installed in 20 minutes. Note: there is a possibility that the bracket holder may block some vehicles' parking sensor. Work with most off road auxiliary lights, 4x4, Jeep, Pickup, SUV, driving lights, LED work Lamp and LED light bars.
| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Height | 4 Inches |
| Length | 20 Inches |
| Weight | 1 Pounds |
| Width | 3 Inches |
| Part Number | 90021B |
| Model | 90021B |
| Warranty | 2 Years Warranty |
More information #ad
9. Nilight
#adNilight, 90021D 4PCS Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty
#adSturdy bracket: strong aluminum alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving.
More information #ad
Fit type: Universal Fit. Package includes: 4 PCs led light bar mounting bracket. Easy installation: pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation.| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Part Number | 90021D |
| Model | 90020D |
| Warranty | 2 Years Warranty |
More information #ad
10. Nilight
#adNilight 90020B 2 Pack Mounting Bracket Kit LED Off Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder, 2 Years Warranty
#adEasy installation: pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation.
More information #ad
Wide application: can be used on tubes of 1", 1-1/2", 1-3/4" & 2" In diameter and applied to LED light bar for almost all kinds of vehicle. Simplifies the installation of nilight off road LED light bars onto the roof rack, roll cages bull bar or head rack of your ATV, UTV and trucks. Package includes: 2Pcs LED light bar mounting bracket.| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Height | 2 Inches |
| Length | 3 Inches |
| Weight | 0.9 Pounds |
| Width | 3 Inches |
| Part Number | 90020B |
| Model | 90020B |
| Warranty | 2 years Warranty |
More information #ad
