As an Amazon Associate I earn from qualifying purchases.
Rugged Ridge #ad - Rugged ridge jeep parts: count on rugged ridge to provide you with proven Jeep parts & accessories like bumpers, lift kits, wheels, interior accessories, floor liners & more for varying Jeep models. Front bumper for jeep: built from high-strength tube steel & finished with a matching satin black powder coat for superior resistance from rust & corrosion.
Accepts both Sport / Sahara OE fog lights. Five year warranty: our rugged ridge products are covered by industry leading 5 year warranty & Rugged Ridge Floor Liners have Limited Lifetime Warranties providing customers with repair or replacements subject to certain common exclusions.
Offroad accessories: get serious about the drive with a variety of off road Jeep accessories from entry guards & floor liners to entry guards, snorkel kits & antennas for a customized vehicle with top grade gear. Jeep front bumper: this front bumper with overrider for Jeep Wrangler offers added protection for both grille and radiator and a practical location for mounting off-road lights or trail camera.
Vijay #ad - A total of 2x4. 75t d-rings are provided. The grade 3 textured black powder coating is corrosion resistant and durable. Including: freedom, Rubicon, Sports, Shahara. Bumper uses 5/32" thick low carbon hard steel and 2" x 0120" precision tolerance steel tubes to make the bumper harder and more durable.
Front bumpers have two 4. 75-ton high-strength d-ring mounting seats welded into the bumper. The maximum tension can support 9500 pounds.
Fit 07-22 wrangler jk/jku/jl and 20-22 gladiator Truck. The front bumper is equipped with 1x120w led aluminum light + 2x20W LED aluminum light + 2x18W LED aluminum light. The front bumper contains a built-in winch plate that can support a 12, 000-pound winch. Follow the instructions to install! Inside and outside of the D-ring mount are mechanically welded to achieve maximum strength.
Hooke Road #ad - This set of front & rear bumpers w/ tire carrier compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors Exclude 2018 JL. Manufactured from 5/32" mild steel plating and 2"x0120" tubing this bumper is completed in a two stage finish using epoxy pre-coating and high-grade textured black powder coating for long lasting durability.
2 year manufacturer's Warranty & Lifetime Customer Support.
JROAD #ad - D-ring mounts are internally and externally welded for added strength. If you have any questions about the product or installation, a set of screws, DIY installation manual. If the product manual is unclear, 20w leD lights x2, D-ring isolators x2, please feel free to contact the JROAD shop.
Fitment models--jeep wrangler front bumper compatible with 2018-2022 Jeep Wrangler JL & Unlimited JLU 2/4 Doors 2020-2022 Gladiator JT all models. Package includes-- jeep front bumper x 1, you can refer to the installation video for installation.
Epoxy pre-coating and high-grade textured black powder coating are used to prevent corrosion from rain and sediment. Dependable protection--if you are still looking for a bumper for your2018-2022 Jeep Wrangler JL & Unlimited JLU that will keep you safe while off-roading and look special, this front bumper is the best choice for you. Upgrade design-1.
Hooke Road #ad - Package contents: front bumper; winch plate for up to 12000 lbs; D-rings 9500 lbs rated, d-rings w/ rubber rings; 2x 18W LED spotlights; Mounting hardware accessories; Installation instruction.
Design: one-piece grill structure integrated increases structural strength. Fitment: compatible with jeep wrangler jl & gladiator jt 2018 2019 2020 2021 2022 2023. 2 stage finish: texture black coated finish on the surface, premium E-coating process interior for 5-year corrosion protection.
Rugged Ridge #ad - Five year warranty: our rugged ridge products are covered by industry leading 5 year warranty & Rugged Ridge Floor Liners have Limited Lifetime Warranties providing customers with repair or replacements subject to certain common exclusions.
Venator front bumper: the jeep front bumper features a built-in winch plate & massive 1-inch thick recovery hooks. Front bumper set: muscular contours & chiseled facets combine with the Venators radical arches, creating a bumper that clearly complements the overall aesthetics of the Jeep JL & JT.
Offroad accessories: get serious about the drive with a variety of off road Jeep accessories from entry guards & floor liners to entry guards, snorkel kits & antennas for a customized vehicle with top grade gear.
TACTIK #ad - Not designed to work with fog lights from Factory Steel Bumper. Integrated winch mount: fitting most winches up to 9500lbs the TACTIK bumpers are equipped with a standard 10" x 4. 5" 254mm x 114. 3mm bolt pattern with an integrated fairlead mount.
Coated in a high-Quality textured powder coat finish for durability. Includes ¾” d-rings with 7/8” pins and black isolator kit to keep down the annoying rattling and powder coat damage.
Fitment: fits 2018-20222 wrangler jl 2 door, 2018-2022 wrangler Unlimited JL 4 Door & 2020 Gladiator JT. Includes 3/4" d-ring pair w/ isolators: heavy duty d-ring tabs are welded inside and out for optimal strength.
ARIES #ad - Lightweight. It features an all-aluminum construction to be lightweight and corrosion-resistant. The bumper is able to accept tow hooks and most winches, giving your Jeep recovery towing capabilities. Winch and tow hooks.
This eliminates the needs for drilling and difficult modifications. This jeep front bumper is easy to install, replacing the factory Jeep bumper and using the existing mounting points. This jeep front bumper is built to keep your offroad ride agile on the trail.
Led light customization. Equip your jeep wrangler or gladiator for the trail with the offroad bumper features of the TrailChaser. No-drill. Aries jeep bumpers come ready to customize with leD lights. Corrosion-resistant. The finish protects the aluminum bumper, snow and more, while helping to hide minor scuffs, mud, scratches and grime.
YITAMOTOR #ad - What you get - 1 x front bumper fits 2018-2023 jeep wrangler jl/ 2020-2023 jeep gladiator, Mounting Washers, 2 x D-rings, 1 x DIY Installation Manual; All contents are packed inside a special 7-layer carton. Precise compatibility - fits 2018-2023 jeep wrangler JL/ 2020-2023 Jeep Gladiator; Uses original vehicle mold to ensure precision.
Special design - comes with 2 cubic led lights and 2 light bars to further broaden the field of vision during night driving; Features tabs to place extra lights for enhanced driving safety; Built-in winch plate mounts most 12000lbs winches; This YITAMOTOR bumper is easy to install and use; Conveniently bolts on without any modifications needed.
Heavy duty construction - manufactured using durable 5/32" steel sheet and 2" x 0120'' wall steel tubing; also features advanced textured black powder coating and precise laser welding; The premium powder coating provides corrosion protection and upgraded durability.
Rough Country #ad - Modular fog light mounts | flush Mount Cubes | Or Retain OEM Fog Lights. Aggressive off road Look and Feel for your Wrangler / Gladiator. Enormous lighting power | 20" single row light bar | 2 Cubes | 10, 080 Lumens | 136 Watts Output | Spot Beam.
1. Rugged Ridge
#adRugged Ridge 11549.05 Arcus Front Bumper Set, With Overrider, 18-Current Jeep JL/JT
#adAccepts both Sport / Sahara OE fog lights. Five year warranty: our rugged ridge products are covered by industry leading 5 year warranty & Rugged Ridge Floor Liners have Limited Lifetime Warranties providing customers with repair or replacements subject to certain common exclusions.
More information #ad
Offroad accessories: get serious about the drive with a variety of off road Jeep accessories from entry guards & floor liners to entry guards, snorkel kits & antennas for a customized vehicle with top grade gear. Jeep front bumper: this front bumper with overrider for Jeep Wrangler offers added protection for both grille and radiator and a practical location for mounting off-road lights or trail camera.
| Brand | Rugged Ridge #ad |
| Manufacturer | Rugged Ridge #ad |
| Height | 18 Inches |
| Length | 12 Inches |
| Weight | 74 Pounds |
| Width | 52 Inches |
| Part Number | 11549.05 |
| Model | 11549.05 |
| Warranty | 5 year limited |
More information #ad
2. Vijay
#adTioyar Front Bumper with Winch Plate and LED Light and D-Ring fit 2007-2022 Wrangler JK JKU JL and Gladiator JT Black Texture
#adFront bumpers have two 4. 75-ton high-strength d-ring mounting seats welded into the bumper. The maximum tension can support 9500 pounds.
More information #ad
It is also safer when off-road. Easy to install without drilling or cutting. Both the inside and outside of the d-ring mount are mechanically welded to achieve maximum strength. Even on a dark road, the built-in LED light can provide a clearer view. Fit 07-22 wrangler jk/jku/jl and 20-22 gladiator Truck. The front bumper is equipped with 1x120w led aluminum light + 2x20W LED aluminum light + 2x18W LED aluminum light. The front bumper contains a built-in winch plate that can support a 12, 000-pound winch. Follow the instructions to install! Inside and outside of the D-ring mount are mechanically welded to achieve maximum strength.
| Brand | Vijay #ad |
| Manufacturer | Vijay #ad |
| Part Number | KL-QG08 |
| Warranty | 1 year |
More information #ad
3. Hooke Road
#adHooke Road Wrangler Rear Bumper with Spare Tire Carrier and Front Bumper Combo Compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors
#ad2 year manufacturer's Warranty & Lifetime Customer Support.
More information #ad
Front bumper: winch plate for up to 12, 000 lbs; rear bumper:comes with 2" Standard Receiver Hitches, Towing Rate 9500lbs;Can Accommodate Up to a 37" Tire. Instruction - comes with the package. If you need any help about the installation, please don't hesitate to contact us for help.| Brand | Hooke Road #ad |
| Manufacturer | Hooke Road #ad |
| Part Number | B07KX5Z51W |
More information #ad
4. JROAD
#adWinch Plate,2018-2022 JL & JLU 2/4 DoorsFull Width, JROAD Jeep Wrangler Front bumper Compatible with Jeep Wrangler , Front Bumper W/ LED Lights , 2 x D-Rings
#adFitment models--jeep wrangler front bumper compatible with 2018-2022 Jeep Wrangler JL & Unlimited JLU 2/4 Doors 2020-2022 Gladiator JT all models. Package includes-- jeep front bumper x 1, you can refer to the installation video for installation.
More information #ad
It features two built-in flood beam fog lights to ensure that you’ll always be able to see the road in front of you. 2. D-rings hackel works for emergency towing, rescue and tie downs. Heavy duty construction--jeep jl bumper manufactured from durable 5/32" steel sheet and 2"X0120" steel tubing, for superior strength and durability. Epoxy pre-coating and high-grade textured black powder coating are used to prevent corrosion from rain and sediment. Dependable protection--if you are still looking for a bumper for your2018-2022 Jeep Wrangler JL & Unlimited JLU that will keep you safe while off-roading and look special, this front bumper is the best choice for you. Upgrade design-1.
| Brand | JROAD #ad |
| Manufacturer | JROAD #ad |
| Height | 12.2 Inches |
| Length | 55.51 Inches |
| Weight | 66.57 Pounds |
| Width | 8.66 Inches |
| Part Number | JPJL-BUMPER02 |
| Model | jeep wrangler JL front bumper |
| Warranty | 365 days |
More information #ad
5. Hooke Road
#adHooke Road Mad Max Front Bumper Grill with Wings w/ 2X 18W LED Lights Compatible with 2018-2023 Jeep Wrangler JL & Gladiator JT
#adDesign: one-piece grill structure integrated increases structural strength. Fitment: compatible with jeep wrangler jl & gladiator jt 2018 2019 2020 2021 2022 2023. 2 stage finish: texture black coated finish on the surface, premium E-coating process interior for 5-year corrosion protection.
More information #ad
Simple bolt-on installation. Full width front bumpertwo wings in two sides which can be uninstalled easily perfectly fits factory fender flares. Contradiction space exterior design style, possess aesthetics exterior, simultaneously own intrepid appearance. Bumper weight about 104 lbs.| Brand | Hooke Road #ad |
| Manufacturer | Hooke Road #ad |
| Weight | 104 Pounds |
| Part Number | BXG.3020 |
More information #ad
6. Rugged Ridge
#ad20-Current Gladiator JT, Rugged Ridge 11549.42 Venator Front Bumper, 18-Current Jeep Wrangler JL/JLU
#adVenator front bumper: the jeep front bumper features a built-in winch plate & massive 1-inch thick recovery hooks. Front bumper set: muscular contours & chiseled facets combine with the Venators radical arches, creating a bumper that clearly complements the overall aesthetics of the Jeep JL & JT.
More information #ad
Install on your Jeep with an easy bolt-on installation. Rugged ridge jeep parts: count on rugged ridge to provide you with proven Jeep parts & accessories like bumpers, interior accessories, wheels, lift kits, floor liners & more for varying Jeep models. Offroad accessories: get serious about the drive with a variety of off road Jeep accessories from entry guards & floor liners to entry guards, snorkel kits & antennas for a customized vehicle with top grade gear.
| Brand | Rugged Ridge #ad |
| Manufacturer | Rugged Ridge #ad |
| Height | 22 Inches |
| Length | 40 Inches |
| Weight | 65 Pounds |
| Width | 22 Inches |
| Part Number | 11549.42 |
| Model | 11549.42 |
| Warranty | 5 Year Limited |
More information #ad
7. TACTIK
#adTACTIK Heavy Duty Steel Stubby Front Bumper, Short Width, Winch Plate, D-Rings, Steel, Fits Jeep Wrangler JL and Gladiator JT 2018-2022, Heavy Duty, Black Powder Coat Finish
#adCoated in a high-Quality textured powder coat finish for durability. Includes ¾” d-rings with 7/8” pins and black isolator kit to keep down the annoying rattling and powder coat damage.
More information #ad
Heavy duty steel bumper: tactik bumpers are made with 5/32” thick steel sheet and 2” diameter tubing that is laser cut and robotically welded. Accepts factory fog lights: relocate your factory oem fog lights from your factory plastic bumper to a wider mounting location to improve side vision for a safer driving experience. Fitment: fits 2018-20222 wrangler jl 2 door, 2018-2022 wrangler Unlimited JL 4 Door & 2020 Gladiator JT. Includes 3/4" d-ring pair w/ isolators: heavy duty d-ring tabs are welded inside and out for optimal strength.
| Brand | TACTIK #ad |
| Manufacturer | TACTIK #ad |
| Height | 12 Inches |
| Length | 53 Inches |
| Weight | 89 Pounds |
| Width | 22 Inches |
| Part Number | JLFBTB-002 |
| Model | JLFBTB-002 |
More information #ad
8. ARIES
#adSelect Jeep Wrangler JL, Gladiator, ARIES 2082093 TrailChaser Black Aluminum Front Bumper with Brush Guard and Winch Mount
#adThis eliminates the needs for drilling and difficult modifications. This jeep front bumper is easy to install, replacing the factory Jeep bumper and using the existing mounting points. This jeep front bumper is built to keep your offroad ride agile on the trail.
More information #ad
This jeep bumper features cutouts and tabs for the factory Jeep lights, as well as additional cutouts and mounts for aftermarket LED lights. To resist corrosion in spite of rain, this jeep jl / jT bumper has a unique textured black powder coat finish. Led light customization. Equip your jeep wrangler or gladiator for the trail with the offroad bumper features of the TrailChaser. No-drill. Aries jeep bumpers come ready to customize with leD lights. Corrosion-resistant. The finish protects the aluminum bumper, snow and more, while helping to hide minor scuffs, mud, scratches and grime.
| Brand | ARIES #ad |
| Manufacturer | ARIES #ad |
| Height | 16 Inches |
| Length | 45 Inches |
| Width | 18 Inches |
| Part Number | 2082093 |
| Model | 2082093 |
| Warranty | Limited Lifetime Warranty (Five-Year Finish, One-Year Parts) |
More information #ad
9. YITAMOTOR
#adRock Crawler Bumper w/ 4 x LED Lights & 2 x D-Rings, YITAMOTOR Front Bumper Compatible with 2018-2023 Jeep Wrangler JL/ 2020-2023 Jeep Gladiator
#adSpecial design - comes with 2 cubic led lights and 2 light bars to further broaden the field of vision during night driving; Features tabs to place extra lights for enhanced driving safety; Built-in winch plate mounts most 12000lbs winches; This YITAMOTOR bumper is easy to install and use; Conveniently bolts on without any modifications needed.
More information #ad
Service - purchase with peace of mind; we accept returns and exchanges on any defective products or those damaged during transport; Contact us before purchasing if you are not sure how to install. Heavy duty construction - manufactured using durable 5/32" steel sheet and 2" x 0120'' wall steel tubing; also features advanced textured black powder coating and precise laser welding; The premium powder coating provides corrosion protection and upgraded durability.
| Brand | YITAMOTOR #ad |
| Manufacturer | YITAMOTOR #ad |
| Height | 11 Inches |
| Length | 62 Inches |
| Weight | 59.5 Pounds |
| Width | 19 Inches |
| Part Number | YTCE0039 |
| Model | CEETBX-0039 |
| Warranty | 2 year manufacturer |
More information #ad
10. Rough Country
#ad10635, Rough Country Front Non-Winch LED Bumper for Jeep Gladiator/Wrangler JL
#adMore information #ad
Backed by rough Country's Limited Lifetime Replacement Warranty. Durability / strength | full Width Design/Fit | Built-In Winch Plate.| Brand | Rough Country #ad |
| Manufacturer | Rough Country #ad |
| Height | 17 Inches |
| Length | 74 Inches |
| Weight | 66 Pounds |
| Width | 17.5 Inches |
| Part Number | 10635 |
| Model | 10635 |
| Warranty | Limited |
More information #ad
