Top 10 Flush Mount D Rings – Truck Tie Downs & Anchors

As an Amazon Associate I earn from qualifying purchases.

1. Mackie Ent Inc


Recessed D-Ring 6,000 lb. Cap. Tiedown w/ Backing Plate, 4 pack

Mackie Ent Inc #ad - 4 sets of d-rings and backing plates. More details below. Installation - these d-rings require routing, or cutting a hole in the floor. For rated capacity Description - see below. Both components are zinc coated to inhibit corrosion. Each d-ring has a 6, 000 lb straight pull capacity. Instructions included. D-ring specifications: see diagram in the photo gallery. Backing plate is used for support under the floor preventing the bolts from pulling through.
BrandMackie Ent Inc #ad
ManufacturerMackie Ent Inc #ad
Part NumberB002WPXVC0



LIBRA Set of 4 Recessed D-Rings w/Backing Plates & Hard Ware Trailer RV Flush Mount Tiedown

LIBRA #ad - Recessed for wall or floor flush mount tie down anchor points, Great for Truck trailers, enclosed trailers, RV's, utility trailers, auto/ATV tiedowns etc. Breaking strength. Package include 4 recessed d-rings and 4 backing plates, 16 lock nuts, 16 mounting bolts, 16 washers. Zinc plated steel made, heavy duty and resistant to rust. D-ring size: 4-7/8"x 4-1/2" x 3/4" deep, d ring dia:039"; backing plate size: 5-5/8" x 5-1/4", 02" thick, center bore dia: 3-1/2". 2, 000 lb working load limit and 6, 000lbs min.
BrandLIBRA #ad
ManufacturerLIBRA #ad
Part Number27023



Stainless Steel Flush Mount D-Rings, Trailer, SHEUTSAN 8 Pack Recessed D-Ring Tie Down Anchors, 6,000 Lbs Breaking Strength, Deliveries, Heavy Duty Recessed Pan Fitting D-Rings for Truck

SHEUTSAN #ad - The loop goes in the direction of the tie down strap tension direction for best strength. It will promise a long service life. The recessed design allows it to stay flush when not in use. Wide application - this recessed d-ring tie down anchor is very useful for securing cargo.

The surface is galvanized, which can effectively block rusting. Heavy duty - the stainless steel flush mount d-rings measures 4 x 3. 7 inches with 4 1/4-inch round mounting holes. Easy to install - you will need a 3 1/2” hole saw. It fits well with tie down straps. The d-ring is 1. 35 inches in diameter. First drill a hole in the deck or flatbed, then fit the trailer tie down anchors in and tighten the mounting boltsnot included. If you have any questions about the recessed pan fitting d-rings, pls feel free to contact us and we will actively reply to you within 24 hours! Solidly built - these recessed d-rings tie downs are well constructed and sturdy.

Nice customer service - please check the package after receiving the product. They are made of 304 stainless steel, which is incredibly hard and impact resistant. Each recessed d-ring has a high breaking strength of 6, 000 lbs and a safe working load limit of 2, 000 lbs.
ManufacturerSHEUTSAN #ad

4. Onesnt


6 PCS V-Ring Tie Down Anchors|2 inches Diameter Steel Bolt-on D-Rings for Cargo on Trucks, Pickups, Trailers | Replacement for D-Ring Plastic Flush Mount Pan Fitting Tie Down Anchors

Onesnt #ad - 1. 4. Dueable & long lasting - this v-ring tie-down anchors made of high strength Galvanized Steel and painted with premium Galvanized Steel protective coating, resist rust and corrosion for long term use. 3. Application: the silver v-ring anchors provide attachment points for securing ratchet rope, cam buckle straps, to tie down motorcycles, kayak and canoe, bike, bungees cords, ATVS, boat, UTVs and all kinds of cargos to your truck bed safety.

That means that these 6 rings can bear up to 6, 000 pounds together! Direct replacement for D-Ring Plastic Flush Mount Pan Fitting Tie down. 5. Including: each package included 6packs V Ring Cargo Tie-Down Anchors and 6PCS Screws+flat Washers. Ultimate assembly breaking strength: 3, 000 pounds; Awesome Safe Working Load: 1, 000 pounds per pack.

2. Easy to install - just thread a screw or bolt through the 13/32" diameter bolting hole on the mounting clip and securing to any wood or metal surface such as minivans and SUVs, warehouses, motorcycle trailers, boats, flatbeds, pickup beds and tailgates, garages, enclosed box trucks, utility and landscaping trailers. Strong & durable: these bolt-on v-rings are made of high-strength galvanized steel.
BrandOnesnt #ad
ManufacturerN\C #ad
Part NumberN\C

5. Sierra Pacific Engineering


Tiedown Breaking Load of 1,200 Pounds, Floor Flush Surface Mount with Black Bases, 4 Pack D Ring Steel Tie-Downs

Sierra Pacific Engineering #ad - Low profile: tie down bases are designed to mount low profile to mounting surface making them ideal for trailers and truck beds. Bases included: Black plastic bases are included. Strong: breaking load of 1, 200 lbs. Durable: steel tie down rings are the perfect combination of cost effectiveness and durability. Surface tie down rings pivot up when needed and pivot away when not in use. Dimensions: roughly 3. 5 inches in diameter. See our dimension specifications or contact us for exact details to ensure a proper fit.
BrandSierra Pacific Engineering #ad
ManufacturerSierra Pacific Engineering and Products #ad
Part Number858-Y

6. US Cargo Control


4 Pack, US Cargo Control Stainless Steel Flush Mount D-Rings 800 lbs

US Cargo Control #ad - 4-pack type 316 Stainless Steel. Ideal for Marine Applications. 266 working Load Limit. Assembly Break Strength. Hardware Not Included. 800 lbs.
BrandUS Cargo Control #ad
ManufacturerUS Cargo Control #ad
Weight1.2 Pounds
Part NumberPF5SS-4PK



Recessed D-Ring Tie Down/Square Cargo Tie-Down Anchors/Flush Mount Tie Down Anchor,4 Pack

DLLJ #ad - Pevent tripping people or getting in the way of cargo placement. Designedthe d-ring is fixed in square recessed pan insteasd of protrude from the floor.

Maximumassembly break strength of 6, 000 pounds and a safe work load limit of 2, 000 pounds. Quality matreialQuality galvanized steel for rust and corrosion resistance. And weep holes on bottom of the pan ensures water drain out. Dimensions 3-3/4" x 4” square recessed pan, 1-3/8" inner clearance D-rings, 1/4” x 1/4” square bolting holes. Usagethe recessed d-ring tie down is for safely to transport your motorcycle, snowmobile, farm tools, landscaping equipment, etc. ;.
BrandDLLJ #ad
ManufacturerDLLJ #ad
Part NumberLH-001

8. X-Haibei


X-Haibei 12 Pack Heavy Duty D Rings Tie Down Anchor Floor Flush Surface Mount 1200 LBS with 4 Inch Bases for Cargo Trailers Trucks RV Campers Vans Boats

X-Haibei #ad - You will get:12 pack d ring tie downs. Load up to 1500 pounds per ring. Size:base 4", hole:about 3/8". Multipurpose:d right can provide a good position. Widely used as tie-down anchors on Floor, pickups, trailer, trucks, campers, vans, boat and so on. Heavy duty:d ring tie downs with industrial Grade plastic rust-free base, high-strength zinc-plated solid steel, for strength and longevity prevent corrosion and rust. I am here and ready to assist you with any questions or concerns you might have before or after the purchase. 1 year warranty.
BrandX-Haibei #ad
ManufacturerX-Haibei #ad
Part NumberBT0338-12

9. Sierra Pacific Engineering


4, Recessed D-Ring Tiedowns 1,200 lb. Capacity Tie Down

Sierra Pacific Engineering #ad - This tie down attachment has a 1, 200 lb. These recessed tie down rings pivot up when in use and pivot down into pan when not in use. To obtain maximum strength it is recommended to install these d-rings with bolts, lock nuts, and fender washers wide diameter.

To install this recessed attachment it requires routing, or cutting a hole in the floor. 1/4" tapered securing holes are on a 4" center. Tiedown pans are designed to mount flush to mounting surface making them ideal for trailers along with other applications. The closer you install to a floor beam the stronger the d-ring.

Use two d-rings to obtain a flush, trip free surface to secure cargo weighing less than 800 lbs. Capacity vertical pull weight rating with a 400 lb WLL* - see more product details below. The 1/4" diameter ring measures 2-1/8" wide X 1-3/4" long. 1/4" drainage hole. Zinc plated tie offs are perfect for those looking for extra corrosion resistance without the expense of stainless steel.
BrandSierra Pacific Engineering #ad
ManufacturerSierra Pacific Engineering #ad
Part Number98065-04-04

10. DC Cargo Mall


Strong Steel Tie-Down Anchor for Truck, Trailer, Round Bolt-On Cargo Tie-Down Flush Mount D-Rings, Pickup Bed 10, DC Cargo Mall 10 D-Ring Tie-Down Anchors, Flatbed

DC Cargo Mall #ad - Follow the directions provided in description below. When you need to safely transport your motorcycle, and other cargo, landscaping equipment, snowmobile, farm tools, kayak, these TEN reliable Flush Mount Tie-Down Anchor D-Rings are the Most Reliable Tie-downs; they are Simple To Install and Offer A Lifetime Of Dependable Strength! NOTE: mounting hardware is not included in THIS product.

Anchor tie downs, clevis grab hook chains, bungee cords, tarp straps, flatbeds, in enclosed trailers, and nylon soft loops on pickup truck Beds, motorcycle tie-downs, Boats, ropes, S-hook or J-hook ratchet and cam straps, utility trailers, And Vans by just inserting the hook ends or strap webbing through the inner clearance of 1 3/8" x 1 1/2" D-Rings On These Recessed-Pan Fittings. Click the images for a detailed sketch with all dimensions of these d-ring pan fitting tiedowns. The 2 1/4" diameter bolting holes keep these tie-downs even with your mounting surface so No Tripping, and the slots on bottoms let water drain out.

They are made out of galvanized steel that ensures superior Strength And Corrosion- & Rust-Resistance with an assembly break strength of 1, 200 pounds and a Safe Working Load Limit of 400 pounds. Installing these durable cargo tie-down anchors into the floor of your mounting area is SIMPLER than you make think. These tie-downs can be used easily in so many custom ways. This kit includes 10 round 4-1/4" diameter pan fitting D Ring Trailer TIEDOWN ANCHORS.
BrandDC Cargo Mall #ad
ManufacturerDC Cargo Mall #ad
Weight2 Pounds
Part NumberPF27