Top 10 Delphi Coil Pack – Automotive Replacement Ignition Coils

As an Amazon Associate I earn from qualifying purchases.

1. Delphi

#ad

Delphi GN10328 Ignition Coil

#adDelphi #ad - Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues.

Delphi uses winding process techniques to control the length of wire between adjacent windings. Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures. Delphi's coils are designed and endurance tested to resist the common stresses that cause failure. Delphi's ignition coils are engineered to Original Equipment specifications. That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating.

Brand	Delphi #ad
Manufacturer	Delphi #ad
Height	7.5 Inches
Length	3.2 Inches
Weight	0.59 Pounds
Width	2.5 Inches
Part Number	GN10328
Model	GN10328
Warranty	Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties. Call Delphi at: 877-463-3574 Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.

2. Delphi

#ad

Delphi GN10571 Pencil Ignition Coil

#adDelphi #ad - Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures.

Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues. Delphi's ignition coils are engineered to Original Equipment specifications. Delphi's coils are designed and endurance tested to resist the common stresses that cause failure. That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating. Delphi uses winding process techniques to control the length of wire between adjacent windings.

Brand	Delphi #ad
Manufacturer	Delphi #ad
Height	7 Inches
Length	3.1 Inches
Weight	0.65 Pounds
Width	3.4 Inches
Part Number	GN10571
Model	GN10571
Warranty	Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties. Call Delphi at: 877-463-3574 Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.

3. Delphi

#ad

Delphi GN10494 Pencil Ignition Coil

#adDelphi #ad - Delphi's coils are designed and endurance tested to resist the common stresses that cause failure. Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues.

Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures. Delphi uses winding process techniques to control the length of wire between adjacent windings. That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating. Delphi's ignition coils are engineered to Original Equipment specifications.

Brand	Delphi #ad
Manufacturer	Delphi #ad
Height	5.93 Inches
Length	4.6 Inches
Weight	0.7 Pounds
Width	3.39 Inches
Part Number	GN10494
Model	GN10494
Warranty	Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties. Call Delphi at: 877-463-3574 Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.

4. Delphi

#ad

DELPHI GN10164 Ignition Coil for Ford 4.6L 5.4L V8 DG457 DG472 EXPLORER CROWN VICTORIA EXPEDITION F-150 F-250 MUSTANG LINCOLN EXPLORER DG508 3W7Z12029AA GN10164-111B set of 8

#adDelphi #ad - That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating.

Delphi uses winding process techniques to control the length of wire between adjacent windings. Delphi's ignition coils are engineered to Original Equipment specifications. Delphi's coils are designed and endurance tested to resist the common stresses that cause failure. Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures. Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues.

Brand	Delphi #ad
Manufacturer	DELPHI #ad
Height	4 Inches
Length	8 Inches
Weight	3 Pounds
Width	2 Inches
Part Number	GN10164

5. Delphi

#ad

Delphi GN10114 Ignition Coil

#adDelphi #ad - Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues.

That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating. Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures. Delphi's ignition coils are engineered to Original Equipment specifications. Delphi uses winding process techniques to control the length of wire between adjacent windings. Delphi's coils are designed and endurance tested to resist the common stresses that cause failure. Fit type: Vehicle Specific.

Brand	Delphi #ad
Manufacturer	Delphi #ad
Height	6.25 Inches
Length	4.5 Inches
Weight	0 Pounds
Width	3.5 Inches
Part Number	GN10114
Model	GN10114
Warranty	Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties. Call Delphi at: 877-463-3574 Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.

6. Delphi

#ad

Delphi GN10168 Ignition Coil

#adDelphi #ad - Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures.

That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating. Delphi uses winding process techniques to control the length of wire between adjacent windings. Delphi's ignition coils are engineered to Original Equipment specifications. Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues. Delphi's coils are designed and endurance tested to resist the common stresses that cause failure.

Brand	Delphi #ad
Manufacturer	Delphi #ad
Height	2.8 Inches
Length	3.2 Inches
Weight	0.1 Pounds
Width	2.5 Inches
Part Number	GN10168
Model	GN10168
Warranty	Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties. Call Delphi at: 877-463-3574 Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.

7. ENA

#ad

Canyon, Trailblazer, ENA Pack of 6 Ignition Coils compatible with Chevy, Envoy, Rainer- Colorado, Isuzu, Chevrolet GMC Olds Saab UF303 C1395 UF-303

#adENA #ad - Reduces common ignition coil issues such as; no/hard start, misfires, premature catalytic converter failure, poor fuel economy, long crank time, spark plug fouling, inconsistent transmission shifts, lack of power, check engine light illumination.

Ena products are designed to meet or exceed OE specifications in form, fit and function. Lifetime warranty - please use enter your vehicle in your Amazon Garage above to see if this part is compatible with your vehicle. Designed and manufactured to operate reliably under all operating conditions and throughout the entire engine speed range for peak engine performance. Ena ignition coil packs are engineered for original equipment and replacement applications. Every component either matches or improves on the OE design to ensure fast and easy installation with superior performance and reliability.

Brand	ENA #ad
Manufacturer	ENA #ad
Height	6.5 Inches
Length	9.5 Inches
Weight	5 Pounds
Width	3.5 Inches
Part Number	ENAIC121401
Model	Uf-303 C1395

8. Delphi

#ad

Delphi GN10235 Plug Top Coil

#adDelphi #ad - Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures.

Delphi's coils are designed and endurance tested to resist the common stresses that cause failure. Delphi uses winding process techniques to control the length of wire between adjacent windings. That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating. Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues. Delphi's ignition coils are engineered to Original Equipment specifications.

Brand	Delphi #ad
Manufacturer	Delphi #ad
Height	7.7 Inches
Length	3.8 Inches
Weight	0.1 Pounds
Width	3.8 Inches
Part Number	GN10235
Model	GN10235
Warranty	Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties. Call Delphi at: 877-463-3574 Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.

9. Delphi

#ad

Delphi GN10370 Pencil Ignition Coil

#adDelphi #ad - Delphi's coils are designed and endurance tested to resist the common stresses that cause failure. That’s important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating.

Delphi's ignition coils are engineered to Original Equipment specifications. Delphi's ignition coils are designed with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues. Epoxy vacuum techniques reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy's insulation quality and reduces the chances of energy punch-through failures. Delphi uses winding process techniques to control the length of wire between adjacent windings.

Brand	Delphi #ad
Manufacturer	Delphi #ad
Height	7.56 Inches
Length	2.69 Inches
Weight	0.4 Pounds
Width	2.69 Inches
Part Number	GN10370
Model	GN10370
Warranty	Delphi warrants the products will be free of defects in materials and workmanship. Delphi will, as its sole obligation under this limited warranty, replace any non-conforming product. Delphi is not responsible for any incidental or consequential costs (including labor) to remove and install a product or to restore the vehicle to its proper operating condition. In addition, under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties. Call Delphi at: 877-463-3574 Manufacturers’ warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.

10. Delphi

#ad

Delphi GN10738 New Ignition Coil, 1 Pack

#adDelphi #ad - Engineered with the same stringent standards applied to the parts we make for the top global OEMs. Our proprietary sensing elements provide highly accurate airflow readings to the ECU over a wide range of ambient temperatures. New, not Remanufactured.

Brand	Delphi #ad
Manufacturer	Delphi #ad
Height	3.25 Inches
Length	9.5 Inches
Weight	0.63 Pounds
Width	3.25 Inches
Part Number	GN10738
Model	GN10738