Top 10 Bottle Jack Base Plate – Jack Stands

As an Amazon Associate I earn from qualifying purchases.

1. ROCCS

#ad

ROCCS Jack ORB Off- Road Base Fit for Hi Lift Jack/Sky Jack/Trail Jack to Alleviate Jack Hoisting Sinkage

#ad
ROCCS #ad - With serrated teeth: use the teeth to level out the ground before Jacking, to create a clean, the jagged edge helps to scrape at hard dirt or gravel, flat surface for the base to sit on while in use. Note: d0es not fit for smittybilt 2722 & hi lift Jack PP-300 Post Popper.

Quality material & heavy duty: made of a tough pp synthetic material, thick and sturdy materials. Also a drilled hole in center of base attached to your jack bar. Easy to store and carry: it can be stored under the seats or put the Hi Lift Jack base in the trunk. The red color is very easy to be found in the mud, you won't lose it. Compatibility: this off raod base compatible with most hi lift jacks, like All-Cast Jack, patriot edition jack, X-TREME Jack, cast/steel Jack, utv jack, Equipment/Agriculture JackEJ-550.

This base was enough to keep the Hi-Jack from slipping and sinking into the mud while you are hoisting the vehicle. Thick & bright color: the widened bottom plate is suitable for use on soft ground to prevent the jack from sinking and slipping; The bottom is hexagonal which increases the contact area between the base and the ground, it is more stable and does not slip during use.
BrandROCCS #ad
ManufacturerROCCS #ad
Part NumberHi-Lift Jack Base

2. AFF

#ad

20 Ton, Heavy Duty, Dual Throttle Return Spring, Extra Thick Base, Specially Engineered Air Motor, 5620SD, AFF Bottle Jack, Durable, Hydraulic Air Car Lift with Welded Tank and Frame

#ad
AFF #ad - Twin hydraulic system: the jack features a dual hydraulic system for faster and efficient lifting; A universal fit, pumping, the 2-piece handle helps with positioning, and easy storage. Max stability: the rear mounted swivel casters provide easy maneuverability, and the flanged side plates give the tool an enhanced sturdiness and increased stability.

Injury proof: this heavy duty, 20 ton bottle jack has shielded release screws that prevent accidental lowering, offering added safety to workers; It has a high height of 2063" and a low height of 1037". Safety system: this bottle jack is a critical safety system to help secure heavy loads, such as automobiles; The pin type post adjusts to 7 height positions ranging from 12" to 20".

Value commitment: american forge & foundry aff is division of SureWerx USA, and has built a long-standing tradition of providing premium quality products, exceptional service and outstanding value since 1963.
BrandAFF #ad
ManufacturerAFF #ad
Height8 Inches
Length12 Inches
Weight44 Pounds
Width11 Inches
Part Number5620SD
Model5620SD

3. Powerbuilt

#ad

Powerbuilt 620471 Unijack, 6000 lb. Capacity

#ad
Powerbuilt #ad - Combines jack stand and Hydraulic bottle jack in one unit, eliminating need for separate jack stand. Combines jack stand and hydraulic bottle jack in one unit, eliminating need for separate jack stand.

Safely lifts and holds unibody and body-on-frame vehicles, 3 ton capacity. Safety bar locks the unit desired height. Designed to safely Lift and hold both Regular and unibody cars and trucks. Safely lifts and holds Unibody and body-on-frame vehicles. Combines jack stand and hydraulic bottle jack in one unit, eliminating need for separate jack stand. Height range: 11 inch to 21 inch. Safety bar locks the unit desired height.
BrandPowerbuilt #ad
ManufacturerPowerbuilt #ad
Height11.5 Inches
Length9.88 Inches
Weight22.66 Pounds
Width9.75 Inches
Part Number620471
Model620471
Warranty1 year manufacturer

4. Camco

#ad

2 Pack, Camco 44541 Large RV Stabilizing Jack Pads Without Handle, Helps Prevent Jacks from Sinking, 14 Inch x 12 Inch Pad

#ad
Camco #ad - Helps prevent jacks from sinking into soft ground. Built-in handle for ease of use. Interlocking design and handy storage strap for easy storage. Set of 2. 14” x 12” x. 88”.
BrandCamco #ad
ManufacturerCamco #ad
Height1.4 Inches
Length14.4 Inches
Weight0.85 Pounds
Width12.1 Inches
Part Number44541
Model44541
Warranty1 Year

5. Seven Sparta

#ad

Seven Sparta Off-Road Base Compatible with Hi Lift Jack PP Pad to Alleviate Jack Hoisting Sinkage Red

#ad
Seven Sparta #ad - Compatible with most hi-lift jacks:designed and used for most of hi-lift jacks, UTV Jack, cast/steel jack, Includes model All-Cast Jack, Patriot Edition Jack, X-TREME Jack, Equipment/Agriculture JackEJ-550.

No-risk purchase! unconditional 30-day money-back guarantee. If you’re unsatisfied with this item for any reason, we’ll immediately refund your purchase price. Give the off-road Base better footing and greater stability during the lifting process. A drilled hole in center of base attached to your jack bar, store it easy. Alleviate jack sinkage on soft ground: Used on soft ground like sand, mud, grass.

Heavy duty and easy to carry: made of a tough pp synthetic material, better more than a chunk of wood will not rot or break. Do not fit for posT POPPER Jack. One side with serrated teeth: helps to scrape at hard dirt or gravel, to create a clean, flat surface for the base to sit on while in use.
BrandSeven Sparta #ad
ManufacturerSeven Sparta #ad
Part Number122801

6. BAOSHISHAN

#ad

BAOSHISHAN 3 Ton Double Ram Bottle Jack 6-1/2" to 16-1/2" Lifting Range Portable Hydraulic Jack with Carrying Case

#ad
BAOSHISHAN #ad - Widely use-- the hydraulic jack is designed for residential and commercial use, RV, truck, SUV, off-road vehicle, van, which can lift most car, minivan, etc. Additional get-- one carrying case for convenient storage and transportation | ONE YEAR warranty | Professional technical support and online service.

On the basis of constant capacity and volume, the max lifting height is up to 16. 54". High lifting-- this welded jack breaks through the traditional design, and most importantly, which have double ram. Inner/outer welded structure, longer service life and stronger overall structure. The pressure pump is designed to lift with minimal effort.

Sturdy structure-- designed with high-quality alloy steel structure to ensure quality and durability. Important parameters-- rated capacity: 3 ton 6, 000 lbs | max height: 420mm/16. 54" | min height: 165mm/6. 50" | lifting height: 195mm/7. 68" | adjustable height: 60mm/2. 36" adjustable screw top extension | Net Weight: 2. 5kg/5. 5lbs.
BrandBAOSHISHAN #ad
ManufacturerBAOSHISHAN #ad
Part NumberZKN255a

7. Reese

#ad

Black, Reese Towpower 7048400 Farm Jack Foot Plate, 10in. 10in. x 1in.

#ad
Reese #ad - 7, 000 pounds capacity. Rugged polypropylene plastic. Provides increased stability. 10 inches by 10 inches by 1 inch. Removable locator ring.
BrandReese #ad
ManufacturerReese Towpower #ad
Height9 Inches
Length11 Inches
Weight1 Pounds
Width7 Inches
Part Number7048400
Model7048400
Warranty1 Year

8. Hi-Lift

#ad

Hi-Lift ORB Off Road Base

#ad
Hi-Lift #ad - This item is not compatible with the First Responder Jack by Hi-Lift. Drilled hole in center of base for convenient storage on jack bar. Fit type: Universal Fit. Alleviates jack sinkage on soft surfaces. Rugged construction for strength and durability. Compatible with all standard Hi-Lift brand jacks. Serrated teeth along one side helps scrape or level ground for base.
BrandHi-Lift #ad
ManufacturerHi-Lift #ad
Height3 Inches
Length12 Inches
Weight2.9 Pounds
Width12 Inches
Part NumberORB
ModelORB
Warranty12 months from the date of purchase, only to the original owner, against defective materials and workmanship.

9. Tri-Lynx

#ad

10 Pack , Orange, Tri-Lynx 00015 Lynx Levelers

#ad
Tri-Lynx #ad - Lynx recreational Vehicle Leveling Kit, 10/Pack. Modular designed levelers not only configure to fit any leveling function, but they also withstand tremendous weight. To use: simply set them into a pyramid shape to the desired height that the RV needs to be raised and drive onto the stack. The levelers can also be used as a support base for other stabilizing equipment.
BrandTri-Lynx #ad
ManufacturerTri-Lynx #ad
Height10.5 Inches
Length8.5 Inches
Weight0.03 Pounds
Width8.5 Inches
Part Number00015
Model00015
Warranty3 year Comprehensive

10. SWAG Offroad

#ad

Swag Off Road Bottle Jack Axle Cradle

#ad
SWAG Offroad #ad - The bottle jack axle cradle can be used with any bottle jack 2 tons up to 20 tons. The bottle jack axle cradle is designed to be welded directly to the top of any bottle jack that meets your particular need or application. Laser cut out of 5/16" steel so it will hold up to any abuse you throw at it.
BrandSWAG Offroad #ad
ManufacturerSWAG Offroad #ad
Height4 Inches
Length8 Inches
Width8 Inches
Part Number6BJAC