As an Amazon Associate I earn from qualifying purchases.
One led resistor is required for each turn signal bulb or each license plate light bulb. This will solve led related turn signal lights or license plate light problems, no flashing or burnt out bulb indications.

Usually each led bulb installation requires one resistor connected in parellel see picture below for instruction.


P> controls current flow- the zento deals 6 ohm 50w led load resistors will control the current flow in electrical circuits. P>. P>. Note: led load resistor will get hot, please don't mount the LED load resistors on plastic, therefore, hoses or painted surfaces. P>.
Please apply the provided quick wire clip so you don’t have to cut any existing wires. P> universal- the zento deals 6 ohm 50w led load resistors will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load. P>. One load resistor is required for each turn signal bulb. It will put a specific amount of resistance into your LED lights to make it function properly because LEDs uses less energy than your regular lights.

Mounting screw not included. Design for low power turn signal LED bulbs. Solution for fast turn Signal Blinking response after installing LED light bulb. Not recommended for other LED bulbs.

P> universal- the zento deals 6 ohm 50w led load resistors will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load. P> easy installation- the zento deals 6 ohm 50w led load resistors is easy to install, just connect one wire to ground and the other wire to the turn/brake wire.
P> fixes light errors- the zento deals 6 ohm 50w led load resistors will fix your led lights problems such as blinker flash error, hyper or error flashing of LED turn signal, no flashing or burnt out bulb indications, parking / driving running light or license plate light. It will put a specific amount of resistance into your LED lights to make it function properly because LEDs uses less energy than your regular lights. P>. P>. P>. P>.

Premium quality - the zone tech lED load resistors are constructed from premium quality materials to ensure maximum strength and durability for long lasting usage. Reduces current flow - the zone tech led load resistors acts to reduce current flow, and, act to lower voltage levels within circuits.
T-taps are included in the package to ease out the installation process. In this case, at the same time, they are used to simulate the load of a regular filament bulb 2 Amp load. Simply connect one wire of the resistor to the ground and the other one to the positive wire. This will solve led related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications.

It can work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load.


Load resistors heat up like light bulbs and get really hot when working. Used for headlight bulb, turn signal light, fog Lamp, Daytime Running Light etc. Working power: 50w 8 ohmhigher decoding rate than 6 ohm.
One led load resistor for One LED Bulb. Please buy with Confidence! And the bulbs size Also Need To Be Confirmed. Amazon filter system might not be 100% Accurate, So Please Double Check Your Original Bulb Type Before Ordering. Mount them on metal surface, not plastic. 3157b-type led load resistors, Fits to Most America-made Car. So don't touch by hand directly.
1. Cutequeen
#ad
Warning Cancellor with 8pc Quick wire Clip, CUTEQUEEN TRADING 4PCS 50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights or DRL Fix Hyper Flash
#adCutequeen #ad - Load resistors for led turn signal light fix or led license Plate Lights Error Fix. 4pcs 50 watt 6ohm load resistors + 8pc Quick wire Clip.One led resistor is required for each turn signal bulb or each license plate light bulb. This will solve led related turn signal lights or license plate light problems, no flashing or burnt out bulb indications.
More information #ad
Load resistors get really HOT when working. It can work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load. Mount it on metal surface, NOT plastic.Brand | Cutequeen #ad |
Manufacturer | JIANXIN #ad |
Weight | 0.02 Pounds |
Part Number | JIANXIN-06-04-04-04 |
Model | JIANXIN-06-05-01-C002 |
More information #ad
2. Aaron
#ad
4Pcs Aaron 50W 6ohm Load Resistors, Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code Resistors get very hot during working
#adAaron #ad - You may connect the wires with the splice taps providedquick but maybe not solid. Warning: load resistors heat up like halogen bulbs. Not designed for consistant working bulbs Day time running light, fog light, headlight LED bulbs.Usually each led bulb installation requires one resistor connected in parellel see picture below for instruction.
More information #ad
Mount them on metal surface by screwsnot included. Or you may cut the wires and connect them more solidly. Keep resistors inchs away from plastic parts. They get really HOT when working. Resistors may become very hot to melt plastic parts nearby. Solution for fast turn signal blinking response after installing LED light bulbs.Brand | Aaron #ad |
Weight | 0.26 Pounds |
Part Number | A4-50W-6ohm |
Model | A4-50W-6ohm |
More information #ad
3. iBrightstar
#ad
Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code, iBrightstar 50W 6ohm Load Resistors
#adiBrightstar #ad - Notice! load resistors heat up like light bulbs and get super HOT when working. Just connect the wires with the splice taps provided and no wire cutting is necessary. One resistor is required for each turn signal bulb or each license plate light bulb.More information #ad
Make sure you mount them away from any wires or plastic. Prevent led turn signal lights or License Plate Brake Lights from hyper flashing, malfunction or trigger warning message on dashboard. 2pcs 50w 6ohm load resistors + 4pcs Quick wire Clip. Easy installation.Brand | iBrightstar #ad |
Manufacturer | iBrightstar #ad |
Height | 0.61 Inches |
Length | 1.97 Inches |
Weight | 0.05 Pounds |
Width | 1.1 Inches |
Part Number | iBrightstar-resistor-50W/6ohm |
More information #ad
4. Zento Deals
#ad
Zento Deals 8 Pieces of 6 Ohm 50W LED Load Resistors – Fix The Flickering LED Turn Signal Light or LED License Plate Lights or DRL
#adZento Deals #ad - P> fixes light errors- the zento deals 6 ohm 50w led load resistors will fix your led lights problems such as blinker flash error, no flashing or burnt out bulb indications, hyper or error flashing of LED turn signal, parking / driving running light or license plate light.P> controls current flow- the zento deals 6 ohm 50w led load resistors will control the current flow in electrical circuits. P>. P>. Note: led load resistor will get hot, please don't mount the LED load resistors on plastic, therefore, hoses or painted surfaces. P>.
More information #ad
P> easy installation- the zento deals 6 ohm 50w led load resistors is easy to install, just connect one wire to ground and the other wire to the turn/brake wire. P> high quality- the zento deals 6 ohm 50w led load resistors is made of high quality materials to sustain a long lasting usage. Please apply the provided quick wire clip so you don’t have to cut any existing wires. P> universal- the zento deals 6 ohm 50w led load resistors will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load. P>. One load resistor is required for each turn signal bulb. It will put a specific amount of resistance into your LED lights to make it function properly because LEDs uses less energy than your regular lights.
Brand | Zento Deals #ad |
Manufacturer | Zento Deals #ad |
Part Number | LB72-8 |
Model | LEPAZA55333 |
More information #ad
5. ARTR
#ad
Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error CodeResistor gets very hot during working, 4PCS ARTR 50W 6ohm Load Resistors
#adARTR #ad - Or you may cut the wires and connect them more solidly. Load resistors heat up like light bulbs and get really HOT when working.Mounting screw not included. Design for low power turn signal LED bulbs. Solution for fast turn Signal Blinking response after installing LED light bulb. Not recommended for other LED bulbs.
More information #ad
You may connect the wires with the splice taps providedquick but maybe not solid. Package include: 4pcs 50w 6ohm load resistors and 8Pcs T-Taps. Mount them on metal surface, NOT plastic. Solution for "bulb out signal" / "obc error message" after installing SMD LED light bulb.Brand | ARTR #ad |
Manufacturer | ARTR #ad |
Height | 0.7 Inches |
Length | 5 Inches |
Weight | 0.02 Pounds |
Width | 4.7 Inches |
Part Number | ARTR-50W-6ohm-4 |
Model | ARTR-50W-6ohm-4 |
More information #ad
6. Zento Deals
#ad
Zento Deals 4 Pieces of 6 Ohm 50W LED Load Resistors – Fix The Flickering LED Turn Signal Light or LED License Plate Lights or DRL
#adZento Deals #ad - Note: led load resistor will get hot, therefore, please don't mount the LED load resistors on plastic, hoses or painted surfaces. P> controls current flow- the zento deals 6 ohm 50w led load resistors will control the current flow in electrical circuits.P> universal- the zento deals 6 ohm 50w led load resistors will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load. P> easy installation- the zento deals 6 ohm 50w led load resistors is easy to install, just connect one wire to ground and the other wire to the turn/brake wire.
More information #ad
One load resistor is required for each turn signal bulb. P> high quality- the zento deals 6 ohm 50w led load resistors is made of high quality materials to sustain a long lasting usage. P> fixes light errors- the zento deals 6 ohm 50w led load resistors will fix your led lights problems such as blinker flash error, hyper or error flashing of LED turn signal, no flashing or burnt out bulb indications, parking / driving running light or license plate light. It will put a specific amount of resistance into your LED lights to make it function properly because LEDs uses less energy than your regular lights. P>. P>. P>. P>.
Brand | Zento Deals #ad |
Manufacturer | Zento Deals #ad |
Part Number | LB72-4 |
Model | LEPAZA66434 |
More information #ad
7. Zone Tech
#ad
8-Pieces Premium Quality LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights or DRL Fix Hyper Flash, Warning Cancellor, Zone Tech 50W 6Ohm LED Load Resistors
#adZone Tech #ad - Fixes light errors - the zone tech led load resistors fixes your LED lights so they can function properly. Universal - the zone tech led load resistors works on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb.Premium quality - the zone tech lED load resistors are constructed from premium quality materials to ensure maximum strength and durability for long lasting usage. Reduces current flow - the zone tech led load resistors acts to reduce current flow, and, act to lower voltage levels within circuits.
More information #ad
Easy installation - the zone tech led load resistors installs easily. One led resistor is required for each turn signal bulb or each license plate light bulb. T-taps are included in the package to ease out the installation process. In this case, at the same time, they are used to simulate the load of a regular filament bulb 2 Amp load. Simply connect one wire of the resistor to the ground and the other one to the positive wire. This will solve led related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications.
Brand | Zone Tech #ad |
Manufacturer | Comfort Wheels #ad |
Height | 4 Inches |
Length | 5.1 Inches |
Width | 0.6 Inches |
Part Number | LB0072-8 |
Model | LB0072-8 |
More information #ad
8. XKGLOW
#ad
50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights Fix Hyper Flash, Warning Cancellor
#adXKGLOW #ad - One led resistor is required for each turn signal bulb or each license plate light bulb. ". Mount it on metal surface, NOT plastic. 2pcs 50 watt 6ohm load resistors + 4pc quick wire clip, We offer "ONE YEAR" warranty and Unconditional return policy with 30 days,.It can work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load.
More information #ad
Load resistors for led turn signal light fix or led license plate Lights Error Fix. This will solve led related turn signal lights or license plate light problems, no flashing or burnt out bulb indications ". Load resistors get really HOT when working.Brand | XKGLOW #ad |
Manufacturer | XKGLOW #ad |
Weight | 0.15 Pounds |
Part Number | XK-RE-6-50W |
Model | XK-RE-6-50W |
More information #ad
9. Stark
#ad
7440 7441, Reverse lights, 50W 6Ohm LED Load Resistors for LED, Turn signals, etc Bulb Size, Fix Hyperflash Rapid Blinking for Tail lights
#adStark #ad - Stark products have stark brand stickers not be fooled by counterfeit - please reporT TO AMAZON. Warranty: 1 Year. Fits: 7440 7441 one led resistor is required for each application bulb.More information #ad
Content: pair of 6 ohm 50w led load resistors for LED Turn Signal Light Fix or Error Fix. Intended use: this will solve LED related turn signal lights such as hyper flashing, no flashing or burnt out bulb indications.Brand | Stark #ad |
Manufacturer | UNV inc #ad |
Part Number | LEDRZ-7440-50W |
Model | 10 |
Warranty | One years warranty |
More information #ad
10. TUINCYN
#ad
Fix Headlight LED Bulb Fog Lamp Fast Hyper Flash Turn Signal Blink Light Dashboard Error Code CANBUS Resistors Decoder1 Pair, TUINCYN 50W 8 ohm 3157 3047 3057 3155 3457 LED Load Resistors
#adTUINCYN #ad - Plug& play led load resistors fits 3047, 3457, 3757a, 3157a, 3357, 4157, 3157, 3357a, 3157na, 3057, 4114, 4157na, 3457a, 3057a, 3457na, 4057, 3155, 3454na, 5702a, 5702ak for turn signal bulb Or LED License Plate Lights to Avoid Hyper Flashing- No Flashing Or Burnt Out Bulb Indications.Load resistors heat up like light bulbs and get really hot when working. Used for headlight bulb, turn signal light, fog Lamp, Daytime Running Light etc. Working power: 50w 8 ohmhigher decoding rate than 6 ohm.
More information #ad
Tuincyn offers "one year" warranty on items Damaged During Delivery Or Have A Confirmed Manufacturer Defect. See the product socket Picture And Make A Confirmation. Brand new 3157 socket/base type led load resistors with 50w 8 ohm high power lights Error Free Canceller Capacitor Decoder Wire, Excellent for Heat Dissipation. One led load resistor for One LED Bulb. Please buy with Confidence! And the bulbs size Also Need To Be Confirmed. Amazon filter system might not be 100% Accurate, So Please Double Check Your Original Bulb Type Before Ordering. Mount them on metal surface, not plastic. 3157b-type led load resistors, Fits to Most America-made Car. So don't touch by hand directly.
Brand | TUINCYN #ad |
Manufacturer | TUINCYN #ad |
Part Number | 2AM-TU1221-A3157B |
More information #ad