Sywon 40 Pack Brass Misting Nozzles Replacement Heads for Garden Patio Lawn Landscaping Dust Control and Outdoor Cooling Mister System, 10/24 UNC

#ad
Sywon SY08-BMNRH-40 #ad - Wide usage the mist nozzles can be widely applied for garden, greenhouses, epidemic prevention, spraying disinfectant, deodorant air purification, patio, outdoor cooling, lawn misting systems, humidification, and small fountains, etc. Easy to install & high efficiency the nozzle heads can be easily screwed into any 10/24 UNC threaded mist nozzle opening.

Sywon 40 Pack Brass Misting Nozzles Replacement Heads for Garden Patio Lawn Landscaping Dust Control and Outdoor Cooling Mister System, 10/24 UNC #ad - High efficiency: operation Pressure:20-70kg/cm. Durable material: made of brass with good quality; Rust-free and durable. Orifice: the orifice of these misting nozzles is 0012 inch/03 mm in diameter, which fits for low pressure mister system. Durable material & 0012"dia. Flow rate:80-145ml/min. A self-sealing o-ring is included with each nozzle, making it leak-proof.

Orifice the misting nozzles are made of brass with good quality. 0012" dia. Flow rate is 80-145ml/min. The orifice of these misting nozzles is 0

#ad



Greenlee Drill/Tap/Countersink, Hss, 10-24

#ad
Greenlee DTAP10-24 #ad - Quick change hex, includes Plastic Case and Quick Change Adapter Made in: China. Shank type 1/4 In. Commercial brand: Greenlee. Drill/tap/countersink, high speed steel, uncoated Finish, Cutting Direction Right Hand, Size 10-24, Overall Length 2-3/50 In.

#ad



Orbit 10109W Mist Calcium Inhibitor Filter

#ad
Orbit Underground/Sunmate 10109W #ad - The calcium inhibitor filter protects your misting systems by preventing potentially clogging solid sediments from passing through the system. For use with all outdoor cooling systems. Helps eliminate clogging when used with auto drain valves. Additionally, the filter coats smaller particulates with polyphosphates that enable easier passage through nozzles without forming blockages.

Commercial brand: Greenlee. Annual filter replacement is recommended and will prolong the life of mist nozzles. Prolongs nozzle life by preventing solid particles from clogging nozzles. It filters our particles as small as 5 microns, which is smaller than a human hair. Made in: China. Keeps mist cooling system operating at its best.

Orbit 10109W Mist Calcium Inhibitor Filter #ad - Recommended for use with all outdoor mist cooling systems.

#ad



Orbit Arizona Outdoor Misting System 4-Inch Nozzle Extension 5-Pack 10056H

#ad
Orbit 10056H #ad - Flexible mist nozzle Extension can be used in place of a standard mist nozzle. Flexible: allows for directional adjustment of the mist on a rigid mist line. Can be used to extend the misting nozzle around obstacles. Compatible with orbit mist systems: Screw into any 10/24 threaded mist nozzle opening. Water efficient: cool down without wasting water.

Do not use in freezing temperatures. For use with all outdoor cooling systems. Recommended for use with all outdoor mist cooling systems. For outdoor use with cold water only. Keeps mist cooling system operating at its best. Helps eliminate clogging when used with auto drain valves. These nozzles require minimal water use of 1/2 gallon of water per hour per nozzle.

Orbit Arizona Outdoor Misting System 4-Inch Nozzle Extension 5-Pack 10056H #ad - Product specifications: not for use on pressure boosted systems 160 PSI or above. The 4 In. Includes: 5 flexible Mist Nozzle Extensions Made in: China. Prolongs nozzle life by preventing solid particles from clogging nozzles. The nozzle extends the mist spray another four inches in the mist line, and the wire memory allows the user to direct the mist wherever needed.

The extension features a brass and Stainless Steel Mist nozzle that only uses 1/2 gallon per hour per nozzle, making it the most water-efficient nozzle available.

#ad



AmMist 23pcs/pack Mister Nozzle Stainless Steel Fog Nozzles 0.30mm 0.012inch Orifice 10/24 unc Thread For Garden, Humidification, Outdoor Cooling, Dust Control, Landscaping

#ad
AmMist #ad - Operation pressure: 100~1, 500psi 6. 9bar~100bar8. Reliability 】: the factory focuses in nozzle engineering and manufacturing for more than 30 years. Performance 】: operation pressure: 100~1, 500psi 6. 9bar~100bar / flow rate: 35~138ml/min. Helps eliminate clogging when used with auto drain valves. Recommended for use with all outdoor mist cooling systems.

Nozzles are WITHOUT filters. Using properly filtered water helps extend lifespan. 2. For use with all outdoor cooling systems. For outdoor use with cold water only. 60-70 degree cone Pattern Spray7. Nozzles are WITHOUT anti-drips. Applying solenoid valves helps drain efficiently. Your positive feedback gives us strength! ※ PACKAGE:23 pieces nozzles Made in: China.

AmMist 23pcs/pack Mister Nozzle Stainless Steel Fog Nozzles 0.30mm 0.012inch Orifice 10/24 unc Thread For Garden, Humidification, Outdoor Cooling, Dust Control, Landscaping #ad - Features:1. Keeps mist cooling system operating at its best. The nozzle creates fine mist with lower cost comparing to the humidifier. 3.

#ad



1/4'' Slip-Lock, Outdoor Mist Tee Nozzle, Water Brass Misting Mister Nozzle, Misting Nozzles Kit, with Thread 10/24 UNC Tees 10pcs and 0.4mm Orifice Nozzle 12pcs, for Outdoor Cooling System

#ad
Suzhou Antisilipu Electronic Technology Co. Ltd #ad - For use with all outdoor cooling systems. Working pressure: 30 BAR 450 PSI ;. Suitable for 1/4'' pipe ; quick pushing Nozzle seat;Thread size is UNC10-24;. Recommended for use with all outdoor mist cooling systems. Commercial brand: Greenlee. Feture: slip lock quick pushing; ● mist spray nozzle is applied the low-pressure thoery, the spraying liquid could be runing water ; ● The misting performance is excellent.

For outdoor use with cold water only. These nozzles require minimal water use of 1/2 gallon of water per hour per nozzle. Product specifications: not for use on pressure boosted systems 160 PSI or above. Helps eliminate clogging when used with auto drain valves. It is a good match with the misting fitting, Misting Nozzle Mist Nozzle, 12-Pack Made in: China.

1/4'' Slip-Lock, Outdoor Mist Tee Nozzle, Water Brass Misting Mister Nozzle, Misting Nozzles Kit, with Thread 10/24 UNC Tees 10pcs and 0.4mm Orifice Nozzle 12pcs, for Outdoor Cooling System #ad - Low pressure mist nozzle seat; For outdoor use with cold water only;Food grade material ;. Misting nozzle tees 10pcs and Nozzle 12pcs in a bag; Brass,. Can work under normal pressure2-3kg;Max. Do not use in freezing temperatures. Multi-usage 】: humidification, outdoor cooling, landscaping, greenhouse, etc.

Durability 】: complete 303 stainless Steel Nozzle / Raw materials are purchased from Japan with high purity.

#ad



Aootech 32 Pack Brass Misting Nozzles for Outdoor Cooling System, 0.012" Orifice 0.3 mm 10/24 UNC

#ad
Aootech Aootech-6-5 #ad - Included in the package: 32 x Brass Misting Nozzles Made in: China. Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required. Recommended for use with all outdoor mist cooling systems. Low pressure mist nozzle seat; For outdoor use with cold water only;Food grade material ;.

Warning this misting nozzle does not have a filtering device. For use with all outdoor cooling systems. From the manufacturer this misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, low cost, energy and water saving, good effect, no leakage.

Aootech 32 Pack Brass Misting Nozzles for Outdoor Cooling System, 0.012" Orifice 0.3 mm 10/24 UNC #ad - Can work under normal pressure2-3kg;Max. Helps eliminate clogging when used with auto drain valves. Thread size is unc10-24 ; orifice Mist nozzle Diameter: 04mm; stainless steel orifce. Nozzle can fully spray use the pressure of tap water. The built-in stainless steel wafer through advanced forging process, strong durability, is 2.

5 times the life of similar nozzle. Misting nozzle tees 10pcs and Nozzle 12pcs in a bag; Brass,. These nozzles require minimal water use of 1/2 gallon of water per hour per nozzle.

#ad



Orbit Arizona Mist 10115H 3/8-Inch Misting Brass Auto Drain Valve

#ad
Orbit Underground/Sunmate 10115H #ad - Can work under normal pressure2-3kg;Max. The auto drain valve is used to drain water from the mist line when it is not in use. High-quality brass construction. Best choice for Outdoor Use With Cold Water. Screw into any 10/24-Threaded Mist Nozzle Opening. Operation pressure:4-70kg/cm 60-995 psi flow Rate:80-145l/Min 21-38GPM.

Minimal water use of 1/2 GPH Per Nozzle. Prevents premature mist nozzle clgging and prolongs the life of your misting system. These nozzles require minimal water use of 1/2 gallon of water per hour per nozzle. Product specifications: not for use on pressure boosted systems 160 PSI or above. Do not use in freezing temperatures.

Orbit Arizona Mist 10115H 3/8-Inch Misting Brass Auto Drain Valve #ad - Multi-usage 】: humidification, outdoor cooling, landscaping, greenhouse, etc. Durability 】: complete 303 stainless Steel Nozzle / Raw materials are purchased from Japan with high purity. Stable quality 】: taking a 100% inspection of all the nozzles before shipment. For outdoor use with cold water only.

Made in: China. Thread size is unc10-24 ; orifice Mist nozzle Diameter: 04mm; stainless steel orifce.

#ad



Orbit Arizona Mist 10103 Misting Nozzle Cleaner, 8-Ounce

#ad
Orbit Underground/Sunmate 10103 #ad - Helps eliminate clogging when used with auto drain valves. Prolongs nozzle life by preventing solid particles from clogging nozzles. These nozzles require minimal water use of 1/2 gallon of water per hour per nozzle. Product specifications: not for use on pressure boosted systems 160 PSI or above. Versatile installation: install in any fitting with a 10/24 female-threaded opening or at the end of any orbit slip-lok.

Orbit Arizona Mist 10103 Misting Nozzle Cleaner, 8-Ounce #ad - For outdoor use only. Rinse the nozzles before reinstalling. Made in: China. Misting nozzle tees 10pcs and Nozzle 12pcs in a bag; Brass,. For outdoor use with cold water only. 4 year warranty. Safe, biodegradable, and non-toxic. Easy to install. High-quality brass construction. Best choice for Outdoor Use With Cold Water.

Screw into any 10/24-Threaded Mist Nozzle Opening. Operation pressure:4-70kg/cm 60-995 psi flow Rate:80-145l/Min 21-38GPM. Minimal water use of 1/2 GPH Per Nozzle.

#ad



KUWAN 0.016" Orifice 0.4mm Thread UNC 10/24 Brass Misting Nozzles Low Pressure Atomizing Misting Sprayer Water Hose Nozzle for Greenhouse, Landscaping, Outdoor Cooling Mister System 40PCS

#ad
KUWAN #ad - Prolongs nozzle life by preventing solid particles from clogging nozzles. Suitable for 1/4'' pipe ; quick pushing Nozzle seat;Thread size is UNC10-24;. High-quality brass construction. 4 year warranty. 32pcs brass misting nozzles for Outdoor Cooling System, Greenhouse, Landscaping and Dust Control. High quality: made of brass, never Rust.

Low pressure mist nozzle seat; For outdoor use with cold water only;Food grade material ;. Easy to install. For use with all outdoor cooling systems. For outdoor use only. Package: 40pcs brass misting Nozzles For Outdoor Cooling System. Versatile installation: install in any fitting with a 10/24 female-threaded opening or at the end of any orbit slip-lok.

KUWAN 0.016" Orifice 0.4mm Thread UNC 10/24 Brass Misting Nozzles Low Pressure Atomizing Misting Sprayer Water Hose Nozzle for Greenhouse, Landscaping, Outdoor Cooling Mister System 40PCS #ad - Helps eliminate clogging when used with auto drain valves. This type of nozzle is applied in the low pressure for-making leak-proof, durable; Excellent mist effectively strengthen humidification effect, perfect for misting application Create fine mist droplets that flash evaporate and cool the air almost instantly The brass nozzle heads can be easily screwed into any 10/24 UNC threaded mist nozzle opening Made in: China.

Misting nozzle tees 10pcs and Nozzle 12pcs in a bag; Brass,. Flexible: allows for directional adjustment of the mist on a rigid mist line. Commercial brand: Greenlee.

#ad



WaterSentinel WS-21 Calcium Inhibitor Filter and Misting System Protector

#ad
Water Sentinel WS-21 #ad - Can work under normal pressure2-3kg;Max. Routine use for nozzle maintenance extends nozzle life. Additionally, this filter can catalytically breakdown other impurities very similar to the way a catalytic converter works in your automobile. For outdoor use with cold water only. This water sentinel refrigerator water filter contains a compressed carbon block which provides tremendous capacity to remove and/or reduce impurities and sediment that may be present in your drinking water.

WaterSentinel WS-21 Calcium Inhibitor Filter and Misting System Protector #ad - Keeps mist cooling system operating at its best. Proudly manufactured in America with US based customer service. 90 day warranty against manufacturer defects from date of sale with invoice. Suitable for 1/4'' pipe ; quick pushing Nozzle seat;Thread size is UNC10-24;. Misting nozzle tees 10pcs and Nozzle 12pcs in a bag; Brass,.

Reliability 】: the factory focuses in nozzle engineering and manufacturing for more than 30 years. Performance 】: operation pressure: 100~1, 500psi 6. 9bar~100bar / flow rate: 35~138ml/min. 4 year warranty. Gently soaks mineral deposits away. Safe, biodegradable, and non-toxic.

#ad